/* * (C) Copyright 2002 * Daniel Engstr�m, Omicron Ceti AB, daniel@omicron.se. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * board/config.h - configuration options, board specific */ #ifndef __CONFIG_H #define __CONFIG_H #define GRUSS_TESTING /* * High Level Configuration Options * (easy to change) */ #define CONFIG_X86 1 /* This is a X86 CPU */ #define CONFIG_SC520 1 /* Include support for AMD SC520 */ #define CONFIG_ALI152X 1 /* Include support for Ali 152x SIO */ #define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */ #define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ #define CONFIG_SYS_SDRAM_RAS_CAS_DELAY 3 /* 3T */ /* define at most one of these */ #undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T #define CONFIG_SYS_SDRAM_CAS_LATENCY_3T #define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ #define CONFIG_SYS_RESET_GENERIC 1 /* use tripple-fault to reset cpu */ #undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */ #undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */ #define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */ #undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */ #define CONFIG_SYS_USE_SIO_UART 0 /* prefer the uarts on the SIO to those * in the SC520 on the CDP */ #define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */ #define CONFIG_SHOW_BOOT_PROGRESS 1 #define CONFIG_LAST_STAGE_INIT 1 /* * Size of malloc() pool */ #define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_BAUDRATE 9600 /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_PCI #ifndef GRUSS_TESTING #define CONFIG_CMD_SATA #else #undef CONFIG_CMD_SATA #endif #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NET #define CONFIG_CMD_EEPROM #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" /* #define CONFIG_BOOTCOMMAND "bootm 38000000" */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */ #undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */ /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of DRAM */ /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_SPI_EEPROM /* Support for SPI EEPROMs (AT25128) */ #define CONFIG_MW_EEPROM /* Support for MicroWire EEPROMs (AT93LC46) */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE /* Environment in EEPROM */ #define CONFIG_ENV_IS_IN_EEPROM 1 #define CONFIG_SPI #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/ #define CONFIG_ENV_OFFSET 0 #define CONFIG_SC520_CDP_USE_SPI /* Store configuration in the SPI part */ #undef CONFIG_SC520_CDP_USE_MW /* Store configuration in the MicroWire part */ #define CONFIG_SPI_X 1 /* * JFFS2 partitions */ /* No command line, one static partition, whole device */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=SC520CDP Flash Bank #0" #define MTDPARTS_DEFAULT "mtdparts=SC520CDP Flash Bank #0:-(jffs2)" */ /*----------------------------------------------------------------------- * Device drivers */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_PCNET #define CONFIG_PCNET_79C973 #define CONFIG_PCNET_79C975 #define PCNET_HAS_PROM 1 /************************************************************ *SATA/Native Stuff ************************************************************/ #ifndef GRUSS_TESTING #define CONFIG_SYS_SATA_MAXBUS 2 /*Max Sata buses supported */ #define CONFIG_SYS_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ #define CONFIG_SYS_SATA_MAX_DEVICE (CONFIG_SYS_SATA_MAXBUS* CONFIG_SYS_SATA_DEVS_PER_BUS) #define CONFIG_ATA_PIIX 1 /*Supports ata_piix driver */ #else #undef CONFIG_SYS_SATA_MAXBUS #undef CONFIG_SYS_SATA_DEVS_PER_BUS #undef CONFIG_SYS_SATA_MAX_DEVICE #undef CONFIG_ATA_PIIX #endif /************************************************************ * DISK Partition support ************************************************************/ #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION /* Experimental */ /************************************************************ * Video/Keyboard support ************************************************************/ #ifndef GRUSS_TESTING #define CONFIG_VIDEO /* To enable video controller support */ #else #undef CONFIG_VIDEO #endif #define CONFIG_I8042_KBD #define CONFIG_SYS_ISA_IO 0 /************************************************************ * RTC ***********************************************************/ #define CONFIG_RTC_MC146818 #undef CONFIG_WATCHDOG /* watchdog disabled */ /* * PCI stuff */ #ifndef GRUSS_TESTING #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP /* pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW #define CONFIG_SYS_FIRST_PCI_IRQ 10 #define CONFIG_SYS_SECOND_PCI_IRQ 9 #define CONFIG_SYS_THIRD_PCI_IRQ 11 #define CONFIG_SYS_FORTH_PCI_IRQ 15 #else #undef CONFIG_PCI #undef CONFIG_PCI_PNP #undef CONFIG_PCI_SCAN_SHOW #endif #endif /* __CONFIG_H */