/* * Configuation settings for the SAMA5D3xEK board. * * Copyright (C) 2012 - 2013 Atmel * * based on at91sam9m10g45ek.h by: * Stelian Pop * Lead Tech Design * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H #include #define CONFIG_SYS_TEXT_BASE 0x26f00000 /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_SYS_HZ 1000 #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ /* general purpose I/O */ #define CONFIG_AT91_GPIO /* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_DBGU /* * This needs to be defined for the OHCI code to work but it is defined as * ATMEL_ID_UHPHS in the CPU specific header files. */ #define ATMEL_ID_UHP ATMEL_ID_UHPHS /* * Specify the clock enable bit in the PMC_SCER register. */ #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP /* LCD */ #define CONFIG_LCD #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 24 #define CONFIG_LCD_LOGO #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO #define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_ATMEL_HLCD #define CONFIG_ATMEL_LCD_RGB565 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* board specific (not enough SRAM) */ #define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 #define CONFIG_BOOTDELAY 3 /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* No NOR flash */ #define CONFIG_SYS_NO_FLASH /* * Command line configuration. */ #include #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IMI #undef CONFIG_CMD_LOADS #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) /* SerialFlash */ #define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif /* NAND flash */ #define CONFIG_CMD_NAND #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ONFI_DETECTION /* PMECC & PMERRLOC */ #define CONFIG_ATMEL_NAND_HWECC #define CONFIG_ATMEL_NAND_HW_PMECC #define CONFIG_PMECC_CAP 4 #define CONFIG_PMECC_SECTOR_SIZE 512 #define CONFIG_CMD_NAND_TRIMFFS #endif /* Ethernet Hardware */ #define CONFIG_MACB #define CONFIG_RMII #define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY #define CONFIG_RGMII #define CONFIG_CMD_MII #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL #define CONFIG_PHY_MICREL_KSZ9021 /* MMC */ #define CONFIG_CMD_MMC #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_GENERIC_ATMEL_MCI #define ATMEL_BASE_MMCI ATMEL_BASE_MCI0 #endif /* USB */ #define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI #define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 #define CONFIG_DOS_PARTITION #define CONFIG_USB_STORAGE #endif #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) #define CONFIG_CMD_FAT #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #ifdef CONFIG_SYS_USE_SERIALFLASH /* bootstrap + u-boot + env + linux in serial flash */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_OFFSET 0x5000 #define CONFIG_ENV_SIZE 0x3000 #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x42000 0x300000; " \ "bootm 0x22000000" #elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env in nandflash */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0xc0000 #define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ "nand read 0x22000000 0x200000 0x600000;" \ "bootm 0x22000000 - 0x21000000" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET 0x2000 #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 uImage; " \ "bootm 0x22000000 - 0x21000000" #define CONFIG_SYS_MMC_ENV_DEV 0 #else #define CONFIG_ENV_IS_NOWHERE #endif #ifdef CONFIG_SYS_USE_MMC #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk " \ "root=/dev/mmcblk0p2 rw rootwait" #else #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk " \ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ "256K(env),256k(evn_redundent),256k(spare)," \ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" #endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_HUSH_PARSER /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) #endif