/* * Configuation settings for the Renesas R7780MP board * * Copyright (C) 2007 Nobuhiro Iwamatsu * Copyright (C) 2008 Yusuke Goda * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __R7780RP_H #define __R7780RP_H #undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 #define __LITTLE_ENDIAN 1 /* * Command line configuration. */ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY #define CONFIG_CMD_PCI #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_ENV #define CONFIG_CMD_NFS #define CONFIG_CMD_IDE #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CFG_SCIF_CONSOLE 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_CONS_SCIF0 1 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 /* check for keypress on bootdelay==0 */ /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ /* Network setting */ #define CONFIG_NETMASK 255.0.0.0 #define CONFIG_IPADDR 10.0.192.82 #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_GATEWAYIP 10.0.0.1 #define CFG_SDRAM_BASE (0x08000000) #define CFG_SDRAM_SIZE (128 * 1024 * 1024) #define CFG_LONGHELP #define CFG_PROMPT "=> " #define CFG_CBSIZE 256 #define CFG_PBSIZE 256 #define CFG_MAXARGS 16 #define CFG_BARGSIZE 512 /* List of legal baudrate settings for this board */ #define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CFG_MEMTEST_START (CFG_SDRAM_BASE) #define CFG_MEMTEST_END (TEXT_BASE - 0x100000) /* NOR Flash (S29PL127J60TFI130) */ #define CFG_FLASH_BASE (0xA0000000) #define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT #define CFG_MAX_FLASH_BANKS (2) #define CFG_MAX_FLASH_SECT 270 #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ CFG_FLASH_BASE + 0x100000,\ CFG_FLASH_BASE + 0x400000,\ CFG_FLASH_BASE + 0x700000, } #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CFG_MONITOR_BASE (CFG_FLASH_BASE) #define CFG_MONITOR_LEN (112 * 1024) /* Size of DRAM reserved for malloc() use */ #define CFG_MALLOC_LEN (256 * 1024) /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_SIZE (256) #define CFG_BOOTMAPSZ (8 * 1024 * 1024) #define CFG_RX_ETH_BUFFER (8) #define CFG_FLASH_CFI #define CFG_FLASH_CFI_DRIVER #undef CFG_FLASH_CFI_BROKEN_TABLE #undef CFG_FLASH_QUIET_TEST /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_EMPTY_INFO #define CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE (16 * 1024) #define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_FLASH_ERASE_TOUT 120000 #define CFG_FLASH_WRITE_TOUT 500 /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define TMU_CLK_DIVIDER 4 #define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) /* PCI Controller */ #if defined(CONFIG_CMD_PCI) #define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 #define __io #define __mem_pci #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) /* #define CONFIG_NET_MULTI #define CONFIG_RTL8169 */ /* AX88696L Support(NE2000 base chip) */ #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_AX88796L #define CONFIG_DRIVER_NE2000_BASE 0xA4100000 #endif /* Compact flash Support */ #if defined(CONFIG_CMD_IDE) #define CONFIG_IDE_RESET 1 #define CFG_PIO_MODE 1 #define CFG_IDE_MAXBUS 1 /* IDE bus */ #define CFG_IDE_MAXDEVICE 1 #define CFG_ATA_BASE_ADDR 0xb4000000 #define CFG_ATA_STRIDE 2 /* 1bit shift */ #define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ #define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ #endif /* CONFIG_CMD_IDE */ #endif /* __R7780RP_H */