/* * Configuation settings for the Renesas R7780MP board * * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __R7780RP_H #define __R7780RP_H #undef DEBUG #define CONFIG_SH 1 #define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 #define CONFIG_SYS_R7780MP_OLD_FLASH 1 #define __LITTLE_ENDIAN__ 1 /* * Command line configuration. */ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY #define CONFIG_CMD_PCI #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NFS #define CONFIG_CMD_IDE #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_CONS_SCIF0 1 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 /* check for keypress on bootdelay==0 */ /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ #define CONFIG_SYS_SDRAM_BASE (0x08000000) #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE 512 /* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) #define CONFIG_SYS_MEMTEST_END (TEXT_BASE - 0x100000) /* Flash board support */ #define CONFIG_SYS_FLASH_BASE (0xA0000000) #ifdef CONFIG_SYS_R7780MP_OLD_FLASH /* NOR Flash (S29PL127J60TFI130) */ # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT # define CONFIG_SYS_MAX_FLASH_BANKS (2) # define CONFIG_SYS_MAX_FLASH_SECT 270 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ CONFIG_SYS_FLASH_BASE + 0x100000,\ CONFIG_SYS_FLASH_BASE + 0x400000,\ CONFIG_SYS_FLASH_BASE + 0x700000, } #else /* CONFIG_SYS_R7780MP_OLD_FLASH */ /* NOR Flash (Spantion S29GL256P) */ # define CONFIG_SYS_MAX_FLASH_BANKS (1) # define CONFIG_SYS_MAX_FLASH_SECT 256 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } #endif /* CONFIG_SYS_R7780MP_OLD_FLASH */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (1204 * 1024) /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_SYS_RX_ETH_BUFFER (8) #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER #undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE #undef CONFIG_SYS_FLASH_QUIET_TEST /* print 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE (256 * 1024) #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define CONFIG_SYS_TMU_CLK_DIV 4 #define CONFIG_SYS_HZ 1000 /* PCI Controller */ #if defined(CONFIG_CMD_PCI) #define CONFIG_PCI #define CONFIG_SH4_PCI #define CONFIG_SH7780_PCI #define CONFIG_SH7780_PCI_LSR 0x07f00001 #define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE #define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW 1 #define __io #define __mem_pci #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ #define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE #define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE #define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) /* #define CONFIG_NET_MULTI #define CONFIG_RTL8169 */ /* AX88796L Support(NE2000 base chip) */ #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_AX88796L #define CONFIG_DRIVER_NE2000_BASE 0xA4100000 #endif /* Compact flash Support */ #if defined(CONFIG_CMD_IDE) #define CONFIG_IDE_RESET 1 #define CONFIG_SYS_PIO_MODE 1 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ #define CONFIG_SYS_IDE_MAXDEVICE 1 #define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 #define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ #define CONFIG_IDE_SWAP_IO #endif /* CONFIG_CMD_IDE */ #endif /* __R7780RP_H */