/* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * Ilko Iliev * * Configuation settings for the RONETIX PM9261 board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* ARM asynchronous clock */ #define AT91_CPU_NAME "AT91SAM9261" #define CONFIG_DISPLAY_BOARDINFO #define MASTER_PLL_DIV 15 #define MASTER_PLL_MUL 162 #define MAIN_PLL_DIV 2 #define AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_HZ 1000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ #define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* clocks */ /* CKGR_MOR - enable main osc. */ #define CONFIG_SYS_MOR_VAL \ (AT91_PMC_MOSCEN | \ (255 << 8)) /* Main Oscillator Start-up Time */ #define CONFIG_SYS_PLLAR_VAL \ (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ AT91_PMC_OUT | \ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR1_VAL \ (AT91_PMC_CSS_SLOW | \ AT91_PMC_PRES_1 | \ AT91SAM9_PMC_MDIV_2 | \ AT91_PMC_PDIV_1) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR2_VAL \ (AT91_PMC_CSS_PLLA | \ AT91_PMC_PRES_1 | \ AT91SAM9_PMC_MDIV_2 | \ AT91_PMC_PDIV_1) /* define PDC[31:16] as DATA[31:16] */ #define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 /* no pull-up for D[31:16] */ #define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ #define CONFIG_SYS_MATRIX_EBICSA_VAL \ (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC) /* SDRAM */ /* SDRAMC_MR Mode register */ #define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL /* SDRAMC_TR - Refresh Timer register */ #define CONFIG_SYS_SDRC_TR_VAL1 0x13C /* SDRAMC_CR - Configuration register*/ #define CONFIG_SYS_SDRC_CR_VAL \ (AT91_SDRAMC_NC_9 | \ AT91_SDRAMC_NR_13 | \ AT91_SDRAMC_NB_4 | \ AT91_SDRAMC_CAS_3 | \ AT91_SDRAMC_DBW_32 | \ (1 << 8) | /* Write Recovery Delay */ \ (7 << 12) | /* Row Cycle Delay */ \ (3 << 16) | /* Row Precharge Delay */ \ (2 << 20) | /* Row to Column Delay */ \ (5 << 24) | /* Active to Precharge Delay */ \ (1 << 28)) /* Exit Self Refresh to Active Delay */ /* Memory Device Register -> SDRAM */ #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ #define CONFIG_SYS_SMC0_SETUP0_VAL \ (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) #define CONFIG_SYS_SMC0_MODE0_VAL \ (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ AT91_SMC_DBW_16 | \ AT91_SMC_TDFMODE | \ AT91_SMC_TDF_(6)) /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ AT91_RSTC_PROCRST | \ AT91_RSTC_RSTTYP_WAKEUP | \ AT91_RSTC_RSTTYP_WATCHDOG) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ AT91_WDT_WDV | \ AT91_WDT_WDDIS | \ AT91_WDT_WDD) #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT #undef CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers */ #define CONFIG_ATMEL_USART 1 #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 #define CONFIG_USART3 1 /* USART 3 is DBGU */ /* LCD */ #define CONFIG_LCD 1 #define LCD_BPP LCD_COLOR8 #define CONFIG_LCD_LOGO 1 #undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO 1 #define CONFIG_LCD_INFO_BELOW_LOGO 1 #define CONFIG_SYS_WHITE_ON_BLACK 1 #define CONFIG_ATMEL_LCD 1 #define CONFIG_ATMEL_LCD_BGR555 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* LED */ #define CONFIG_AT91_LED #define CONFIG_RED_LED AT91_PIN_PC12 #define CONFIG_GREEN_LED AT91_PIN_PC13 #define CONFIG_YELLOW_LED AT91_PIN_PC15 #define CONFIG_BOOTDELAY 3 /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE 1 #define CONFIG_BOOTP_BOOTPATH 1 #define CONFIG_BOOTP_GATEWAY 1 #define CONFIG_BOOTP_HOSTNAME 1 /* * Command line configuration. */ #include #undef CONFIG_CMD_BDI #undef CONFIG_CMD_IMI #undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 #define CONFIG_CMD_USB 1 /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ /* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH #define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ #define AT91_SPI_CLK 15000000 #define DATAFLASH_TCSS (0x1a << 16) #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ #define CONFIG_NAND_ATMEL #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 /* our ALE is AD22 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 22) /* our CLE is AD21 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 21) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16 /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Ethernet */ #define CONFIG_DRIVER_DM9000 1 #define CONFIG_DM9000_BASE 0x30000000 #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE + 4) #define CONFIG_DM9000_USE_16BIT 1 #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_OHCI_NEW 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_MEMTEST_END 0x23e00000 #undef CONFIG_SYS_USE_DATAFLASH_CS0 #undef CONFIG_SYS_USE_NANDFLASH #define CONFIG_SYS_USE_FLASH 1 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ #define CONFIG_ENV_IS_IN_DATAFLASH 1 #define CONFIG_SYS_MONITOR_BASE \ (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) #define CONFIG_ENV_OFFSET 0x4200 #define CONFIG_ENV_ADDR \ (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x4200 #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ "root=/dev/mtdblock0 " \ "mtdparts=at91_nand:-(root) " \ "rw rootfstype=jffs2" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ "root=/dev/mtdblock5 " \ "mtdparts=at91_nand:128k(bootstrap)ro," \ "256k(uboot)ro,128k(env1)ro," \ "128k(env2)ro,2M(linux),-(root) " \ "rw rootfstype=jffs2" #elif defined (CONFIG_SYS_USE_FLASH) #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x10000 #define CONFIG_ENV_OVERWRITE 1 /* JFFS Partition offset set */ #define CONFIG_SYS_JFFS2_FIRST_BANK 0 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 #define CONFIG_BOOTCOMMAND "run flashboot" #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" #define MTDPARTS_DEFAULT \ "mtdparts=physmap-flash.0:" \ "256k(u-boot)ro," \ "64k(u-boot-env)ro," \ "1408k(kernel)," \ "-(rootfs);" \ "nand:-(nand)" #define CONFIG_CON_ROT "fbcon=rotate:3 " #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ CONFIG_CON_ROT \ "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ ":$(hostname):eth0:off\0" \ "ramboot=tftpboot 0x22000000 vmImage;" \ "run ramargs;run addip;bootm 22000000\0" \ "nfsboot=tftpboot 0x22000000 vmImage;" \ "run nfsargs;run addip;bootm 22000000\0" \ "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ "" #else #error "Undefined memory device" #endif #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CONFIG_SYS_PROMPT "pm9261> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #error CONFIG_USE_IRQ not supported #endif #endif