/*
 * (C) Copyright 2003
 * Texas Instruments.
 * Kshitij Gupta <kshitij@ti.com>
 * Configuation settings for the TI OMAP Innovator board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_ARM926EJS	1	/* This is an arm926ejs CPU core  */
#define CONFIG_OMAP	1			/* in a TI OMAP core    */
#define CONFIG_OMAP1610	1		/* 5912 is same as 1610  */
#define CONFIG_OSK_OMAP5912	1	/*  a OSK Board  */

#define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
#define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/

/* input clock of PLL */
/* the OMAP5912 OSK has 12MHz input clock */
#define CONFIG_SYS_CLK_FREQ	12000000

#undef CONFIG_USE_IRQ	/* we don't need IRQ/FIQ stuff */

#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG      1       /* Required for ramdisk support */

/*
 * Size of malloc() pool
 */
#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

/*
 * Hardware drivers
 */
/*
*/
#define CONFIG_DRIVER_LAN91C96
#define CONFIG_LAN91C96_BASE 0x04800300
#define CONFIG_LAN91C96_EXT_PHY

/*
 * NS16550 Configuration
 */
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE	(-4)
#define CFG_NS16550_CLK	(48000000)	/* can be 12M/32Khz or 48Mhz */
#define CFG_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart
						on helen */

/*
 * select serial console configuration
 */
#define CONFIG_SERIAL1	1	/* we use SERIAL 1 on OMAP5912 OSK */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE	115200
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH


#include <configs/omap1510.h>

#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTARGS	"mem=32M console=ttyS0,115200n8 noinitrd \
				root=/dev/nfs rw nfsroot=157.87.82.48:\
				/home/mwd/myfs/target ip=dhcp"
#define CONFIG_NETMASK	255.255.254.0	/* talk on MY local net */
#define CONFIG_IPADDR	156.117.97.156	/* static IP I currently own */
#define CONFIG_SERVERIP	156.117.97.139	/* current IP of my dev pc */
#define CONFIG_BOOTFILE	"uImage"	/* file to load */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
#endif

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP	/* undef to save memory     */
#define CFG_PROMPT	"OMAP5912 OSK # "	/* Monitor Command Prompt   */
#define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
/* Print Buffer Size */
#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS	16		/* max number of command args   */
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size    */

#define CFG_MEMTEST_START	0x10000000	/* memtest works on */
#define CFG_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */

#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */

#define CFG_LOAD_ADDR	0x10000000	/* default load address */

/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
 * DPLL1. This time is further subdivided by a local divisor.
 */
#define CFG_TIMERBASE	0xFFFEC500	/* use timer 1 */
#define CFG_PVT	7	/* 2^(pvt+1), divide by 256 */
#define CFG_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */

#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
#define PHYS_FLASH_2		0x01000000	/* Flash Bank #2 */

#define CFG_FLASH_BASE		PHYS_FLASH_1

#define CFG_MONITOR_BASE       CFG_FLASH_BASE  /* Monitor at beginning of flash */

/*-----------------------------------------------------------------------
 * FLASH driver setup
 */
#define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */

#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }

#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
#define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
#define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */

#define CFG_FLASH_USE_BUFFER_WRITE     1       /* Use buffered writes (~10x faster) */
#define CFG_FLASH_PROTECTION   1       /* Use hardware sector protection */

#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
#define CFG_ENV_IS_IN_FLASH	1
/* addr of environment */
#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)

#define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
#define CFG_ENV_OFFSET	0x20000	/* environment starts here  */

#endif							/* __CONFIG_H */