/* * (C) Copyright 2004 * Texas Instruments. * Richard Woodruff * Kshitij Gupta * * Configuration settings for the 242x TI H4 board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP2420 1 /* which is in a 2420 */ #define CONFIG_OMAP2420H4 1 /* and on a H4 board */ /*#define CONFIG_APTIX 1 #* define if on APTIX test chip */ /*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ /* Clock config to target*/ #define PRCM_CONFIG_II 1 /* #define PRCM_CONFIG_III 1 */ #include /* get chip and board defs */ /* On H4, NOR and NAND flash are mutual exclusive. Define this if you want to use NAND */ /*#define CFG_NAND_BOOT */ #ifdef CONFIG_APTIX #define V_SCLK 1500000 #else #define V_SCLK 12000000 #endif /* input clock of PLL */ /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK #undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 /* * Size of malloc() pool */ #define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers */ /* * SMC91c96 Etherent */ #define CONFIG_DRIVER_LAN91C96 #define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) #define CONFIG_LAN91C96_EXT_PHY /* * NS16550 Configuration */ #ifdef CONFIG_APTIX #define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */ #else #define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ #endif #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE (-4) #define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ #define CFG_NS16550_COM1 OMAP2420_UART1 /* * select serial console configuration */ #define CONFIG_SERIAL1 1 /* UART1 on H4 */ /* * I2C configuration */ #define CONFIG_HARD_I2C #define CFG_I2C_SPEED 100000 #define CFG_I2C_SLAVE 1 #define CONFIG_DRIVER_OMAP24XX_I2C /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* * Command line configuration. */ #include #ifdef CFG_NAND_BOOT #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_NAND #define CONFIG_CMD_JFFS2 #else #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #undef CONFIG_CMD_AUTOSCRIPT #endif /* * BOOTP options */ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH /* * Board NAND Info. */ #define CFG_NAND_LEGACY #define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 #define ADDR_COLUMN 1 #define ADDR_PAGE 2 #define ADDR_COLUMN_PAGE 3 #define NAND_ChipID_UNKNOWN 0x00 #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 #define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0) #define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0) #define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0) #define READ_NAND(adr) (*(volatile u16 *)0x6800A084) #define NAND_WAIT_READY(nand) udelay(10) #define NAND_NO_RB 1 #define CFG_NAND_WP #define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0) #define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0) #define NAND_CTL_CLRALE(nandptr) #define NAND_CTL_SETALE(nandptr) #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) #define NAND_DISABLE_CE(nand) #define NAND_ENABLE_CE(nand) #define CONFIG_BOOTDELAY 3 #ifdef NFS_BOOT_DEFAULTS #define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" #else #define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" #endif #define CONFIG_NETMASK 255.255.254.0 #define CONFIG_IPADDR 128.247.77.90 #define CONFIG_SERVERIP 128.247.77.158 #define CONFIG_BOOTFILE "uImage" /* * Miscellaneous configurable options */ #ifdef CONFIG_APTIX #define V_PROMPT "OMAP2420 Aptix # " #else #define V_PROMPT "OMAP242x H4 # " #endif #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT V_PROMPT #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ #define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ #ifdef CONFIG_APTIX #define V_PVT 3 #else #define V_PVT 7 /* use with 12MHz/128 */ #endif #define CFG_TIMERBASE OMAP2420_GPT2 #define CFG_PVT V_PVT /* 2^(pvt+1) */ #define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ #endif /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 #define PHYS_FLASH_SECT_SIZE SZ_128K #define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ #define PHYS_FLASH_SIZE_1 SZ_32M #define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ #define PHYS_FLASH_SIZE_2 SZ_32M /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CFG_FLASH_BASE PHYS_FLASH_1 #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ #define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ #define CFG_MONITOR_LEN SZ_128K /* Reserve 1 sector */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 } #ifdef CFG_NAND_BOOT #define CFG_ENV_IS_IN_NAND 1 #define CFG_ENV_OFFSET 0x80000 /* environment starts here */ #else #define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K) #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE #define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ #endif /*----------------------------------------------------------------------- * CFI FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ #define CFG_JFFS2_MEM_NAND /* * JFFS2 partitions */ /* No command line, one static partition, whole device */ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor1=omap2420-1" #define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)" */ #endif /* __CONFIG_H */