/* * (C) Copyright 2012 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. */ /* * Valid values for CONFIG_SYS_TEXT_BASE are: * 0xFF000000 boot low boot high (standard configuration) * 0x00100000 boot from RAM (for testing only) */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ #endif /* Board specific flash config */ #define CONFIG_SYS_FLASH_BASE 0xff000000 #define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ /* max number of sectors on one chip */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* * Include common defines for all ifm boards */ #include "o2dnt-common.h" /* GPIO configuration */ #define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */ /* Other board specific configs */ #define CONFIG_NETCONSOLE #define CONFIG_SYS_BOOTCS_CFG 0x00087801 #define CONFIG_SYS_RESET_ADDRESS 0xff000000 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ #define CONFIG_BOARD_NAME "o2mnt" #define CONFIG_BOARD_BOOTCMD "${newcmd}" #define CONFIG_BOARD_MEM_LIMIT xstr(62) #define BOARD_POST_CRC32_END xstr(0x01000000) #ifndef CONFIG_IFM_SENSOR_TYPE #define CONFIG_IFM_SENSOR_TYPE "O2M110" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_IFM_DEFAULT_ENV_SETTINGS \ CONFIG_IFM_DEFAULT_ENV_OLD \ CONFIG_IFM_DEFAULT_ENV_NEW \ "linbot=ff060000\0" \ "lintop=ff25ffff\0" \ "rambot=ff260000\0" \ "ramtop=ffc5ffff\0" \ "jffbot=ffc60000\0" \ "jfftop=ffffffff\0" \ "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ "ubotop=ff03ffff\0" \ "kernel_addr=0xff060000\0" \ "ramdisk_addr=0xff260000\0" \ "newcmd=run scrprot;run flash_ext2\0" \ "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \ "${ramtop}\0" \ "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \ "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \ "rootfstype=ext2\0" \ "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \ "mw f0000678 0x30001;mw f0000670 0x3\0" \ "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \ "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \ "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \ "srelease=0.00\0"