/* * (C) Copyright 2012 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> * * SPDX-License-Identifier: GPL-2.0+ */ /* * Valid values for CONFIG_SYS_TEXT_BASE are: * 0xFC000000 boot low boot high (standard configuration) * 0x00100000 boot from RAM (for testing only) */ #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ #endif /* Board specific flash config */ #define CONFIG_SYS_FLASH_BASE 0xfc000000 #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ /* max number of sectors on one chip */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* * Include common defines for all ifm boards */ #include "o2dnt-common.h" /* additional commands */ #define CONFIG_CMD_ITEST /* * GPIO configuration: * CS1 SDRAM activate + no CAN + no PCI */ #define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 /* Other board specific configs */ #define CONFIG_SYS_BOOTCS_CFG 0x00057d01 #define CONFIG_SYS_RESET_ADDRESS 0xfc000000 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ #define CONFIG_BOARD_NAME "o2d" #define CONFIG_BOARD_BOOTCMD "run dhcp_boot" #define CONFIG_BOARD_MEM_LIMIT xstr(126) #define BOARD_POST_CRC32_END xstr(0x01000000) #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_IFM_DEFAULT_ENV_SETTINGS \ CONFIG_IFM_DEFAULT_ENV_OLD \ CONFIG_IFM_DEFAULT_ENV_NEW \ "linbot=fc060000\0" \ "lintop=fc15ffff\0" \ "rambot=fc160000\0" \ "ramtop=fc55ffff\0" \ "jffbot=fc560000\0" \ "jfftop=fcffffff\0" \ "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ "ubotop=fc03ffff\0" \ "kernel_addr=0xfc060000\0" \ "ramdisk_addr=0xfc160000\0" \ "progCram=tftp ${fileaddr} ${cramfsname};" \ "erase ${rambot} ${ramtop};" \ "cp.b ${fileaddr} ${rambot} ${filesize}\0" \ "flash_for_configs=22396\0" \ "flash_mtd=run mtd_args addip addmem;" \ "bootm ${kernel_addr}\0" \ "mtd_args=setenv bootargs root=/dev/mtdblock3 " \ "rw rootfstype=cramfs\0" \ "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ "hostname=IFM_SENSOR\0" \ "netretry=once\0" \ "autoload=no\0" \ "sensorType=O2D222AG\0"