/* * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> * * (C) Copyright 2004 * Texas Instruments. * Richard Woodruff <r-woodruff2@ti.com> * Kshitij Gupta <kshitij@ti.com> * * Configuration settings for the Freescale i.MX31 PDK board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT #endif /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* Bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers */ #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) #define CONFIG_RTC_MC13783 1 /* MC13783 connected to CSPI2 and SS2 */ #define CONFIG_MC13783_SPI_BUS 1 #define CONFIG_MC13783_SPI_CS 2 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition ***********************************************************/ #include <config_cmd_default.h> #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SPI #define CONFIG_CMD_DATE /* * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require * that CFG_NO_FLASH is undefined). */ #undef CONFIG_CMD_IMLS #define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ "bootcmd=run bootcmd_net\0" \ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ "tftpboot 0x81000000 uImage-mx31; bootm\0" #define CONFIG_NET_MULTI #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_BASE 0xB6000000 #define CONFIG_SMC911X_32_BIT 1 /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT)+16) /* max number of command args */ #define CONFIG_SYS_MAXARGS 16 /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x10000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) /*----------------------------------------------------------------------- * FLASH and environment organization */ /* No NOR flash present */ #define CONFIG_SYS_NO_FLASH 1 #define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_SIZE (128 * 1024) /* NAND configuration for the NAND_SPL */ /* Start copying real U-boot from the second page */ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 /* Load U-Boot to this address */ #define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* Configuration of lowlevel_init.S (clocks and SDRAM) */ #define CCM_CCMR_SETUP 0x074B0BF5 #define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \ PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \ PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \ PDR0_MCU_PODF(0)) #define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \ PLL_MFN(12)) #define ESDMISC_MDDR_SETUP 0x00000004 #define ESDMISC_MDDR_RESET_DL 0x0000000c #define ESDCFG0_MDDR_SETUP 0x006ac73a #define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) #define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ ESDCTL_DSIZ(2) | ESDCTL_BL(1)) #define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) #define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) #define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) #define ESDCTL_RW ESDCTL_SETTINGS #endif /* __CONFIG_H */