/* * (C) Copyright 2008 * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es * This work has been supported by: QTechnology http://qtec.com/ * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __CONFIG_H #define __CONFIG_H /* #define DEBUG #define ET_DEBUG */ /*CPU*/ #define CONFIG_XILINX_ML507 1 #define CONFIG_XILINX_440 1 #define CONFIG_440 1 #define CONFIG_4xx 1 #include "../board/xilinx/ml507/xparameters.h" /*Mem Map*/ #define CFG_SDRAM_BASE 0x0 #define CFG_SDRAM_SIZE_MB 256 #define CFG_MONITOR_BASE TEXT_BASE #define CFG_MONITOR_LEN ( 192 * 1024 ) #define CFG_MALLOC_LEN ( CFG_ENV_SIZE + 128 * 1024 ) /*Uart*/ #define CONFIG_XILINX_UARTLITE #define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE #define CFG_BAUDRATE_TABLE { XPAR_UARTLITE_0_BAUDRATE } #define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR /*Cmd*/ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_DIAG #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_JFFS2 #define CONFIG_JFFS2_CMDLINE #undef CONFIG_CMD_I2C #undef CONFIG_CMD_DTT #undef CONFIG_CMD_NET #undef CONFIG_CMD_PING #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_IMLS /*Env*/ #define CFG_ENV_IS_IN_FLASH #define CFG_ENV_SIZE 0x20000 #define CFG_ENV_SECT_SIZE 0x20000 #define CFG_ENV_OFFSET 0x340000 #define CFG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET) /*Misc*/ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "board:/# " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE ( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 ) #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00400000 /* memtest works on */ #define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ #define CFG_LOAD_ADDR 0x00400000 /* default load address */ #define CFG_EXTBDINFO 1 /* Extended board_into (bd_t) */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_LOOPW /* enable loopw command */ #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE /* include version env variable */ #define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CFG_HUSH_PARSER /* Use the HUSH parser */ #define CFG_PROMPT_HUSH_PS2 "> " #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ #define CFG_BOOTMAPSZ ( 8 << 20 ) /* Initial Memory map for Linux */ #define CONFIG_PREBOOT "echo U-Boot is up and runnining;" /*Stack*/ #define CFG_INIT_RAM_ADDR 0x800000 /* Initial RAM address */ #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET ( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE ) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*Speed*/ #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ /*Flash*/ #define CFG_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR #define CFG_FLASH_SIZE (32*1024*1024) #define CFG_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define CFG_FLASH_EMPTY_INFO 1 #define CFG_MAX_FLASH_BANKS 1 #define CFG_MAX_FLASH_SECT 259 #define CFG_FLASH_PROTECTION #define MTDIDS_DEFAULT "nor0=ml507-flash" #define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" #endif /* __CONFIG_H */