/* * (C) Copyright 2007 Czech Technical University. * * Michal SIMEK * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include "../board/xilinx/ml401/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ #define XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* setting reset address */ /*#define CFG_RESET_ADDRESS TEXT_BASE*/ /* ethernet */ #define CONFIG_EMACLITE 1 #define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID /* gpio */ #define CFG_GPIO_0 1 #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR /* interrupt controller */ #define CFG_INTC_0 1 #define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR #define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS /* timer */ #define CFG_TIMER_0 1 #define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) /* FSL */ #define CFG_FSL_2 #define FSL_INTR_2 1 /* * memory layout - Example * TEXT_BASE = 0x1200_0000; * CFG_SRAM_BASE = 0x1000_0000; * CFG_SRAM_SIZE = 0x0400_0000; * * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 * * 0x1000_0000 CFG_SDRAM_BASE * FREE * 0x1200_0000 TEXT_BASE * U-BOOT code * 0x1202_0000 * FREE * * STACK * 0x13F7_F000 CFG_MALLOC_BASE * MALLOC_AREA 256kB Alloc * 0x11FB_F000 CFG_MONITOR_BASE * MONITOR_CODE 256kB Env * 0x13FF_F000 CFG_GBL_DATA_OFFSET * GLOBAL_DATA 4kB bd, gd * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE */ /* ddr sdram - main memory */ #define CFG_SDRAM_BASE XILINX_RAM_START #define CFG_SDRAM_SIZE XILINX_RAM_SIZE #define CFG_MEMTEST_START CFG_SDRAM_BASE #define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ /* start of global data */ #define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 #define CFG_MONITOR_LEN SIZE #define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) #define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_MALLOC_LEN SIZE #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) /* stack */ #define CFG_INIT_SP_OFFSET CFG_MONITOR_BASE /*#define RAMENV */ #define FLASH #ifdef FLASH #define CFG_FLASH_BASE XILINX_FLASH_START #define CFG_FLASH_SIZE XILINX_FLASH_SIZE #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ #define CFG_FLASH_PROTECTION /* hardware flash protection */ #ifdef RAMENV #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) #else /* !RAMENV */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR 0x40000 #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #endif /* !RAMBOOT */ #else /* !FLASH */ /* ENV in RAM */ #define CFG_NO_FLASH 1 #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BDI #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS #define CONFIG_CMD_MEMORY #define CONFIG_CMD_MISC #define CONFIG_CMD_MFSL #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_RUN #if defined(FLASH) #define CONFIG_CMD_ECHO #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMLS #define CONFIG_CMD_JFFS2 #if !defined(RAMENV) #define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #endif #endif #if defined(CONFIG_CMD_JFFS2) /* JFFS2 partitions */ #define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ #define MTDIDS_DEFAULT "nor0=ml401-0" /* default mtd partition table */ #define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ "256k(env),3m(kernel),1m(romfs),"\ "1m(cramfs),-(jffs2)" #endif /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " #define CFG_CBSIZE 512 /* size of console buffer */ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ #define CFG_MAXARGS 15 /* max number of command args */ #define CFG_LONGHELP #define CFG_LOAD_ADDR 0x12000000 /* default load address */ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 #define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CFG_USR_EXCEP /* user exception */ #define CFG_HZ 1000 /* system ace */ #define CONFIG_SYSTEMACE /* #define DEBUG_SYSTEMACE */ #define SYSTEMACE_CONFIG_FPGA #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH #define CONFIG_DOS_PARTITION #define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ "nor0=ml401-0\0"\ "mtdparts=mtdparts=ml401-0:"\ "256k(u-boot),256k(env),3m(kernel),"\ "1m(romfs),1m(cramfs),-(jffs2)\0" #endif /* __CONFIG_H */