/* * Based on Modifications by Alan Lu / Artila and * Rick Bronson <rick@efn.org> * * Configuration settings for the Artila M-501 starter kit, * with V02 processor card. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* ARM asynchronous clock */ /* from 18.432 MHz crystal (18432000 / 4 * 39) */ #define AT91C_MAIN_CLOCK 179712000 /* Perip clock (AT91C_MASTER_CLOCK / 3) */ #define AT91C_MASTER_CLOCK 59904000 #define AT91_SLOW_CLOCK 32768 /* slow clock */ #define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #undef CONFIG_AUTOBOOT_PROMPT #define CONFIG_MENUPROMPT "." /* * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) #define CFG_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 /* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */ #define CFG_AT91C_BRGR_DIVISOR 33 /* * Hardware drivers */ #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 #define CFG_ENV_SECT_SIZE 0x20000 #define CFG_FLASH_USE_BUFFER_WRITE #define CFG_FLASH_PROTECTION /*for Intel P30 Flash*/ #define CONFIG_HARD_I2C #define CFG_I2C_SPEED 100 #define CFG_I2C_SLAVE 0 #define CFG_CONSOLE_INFO_QUIET #undef CFG_ENV_IS_IN_EEPROM #define CFG_I2C_EEPROM_ADDR 0x50 #define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_EEPROM_AT24C16 #define CFG_I2C_RTC_ADDR 0x32 #undef CONFIG_RTC_DS1338 #define CONFIG_RTC_RS5C372A #undef CONFIG_POST #define CONFIG_M501SK #define CONFIG_CMC_PU2 /* define one of these to choose the DBGU, USART0 or USART1 as console */ #define CONFIG_DBGU #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ #define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \ "initrd=0x20800000,8192000 ramdisk_size=15360 " \ "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \ "128k(loader)ro,128k(reserved)ro,1408k(linux)" \ "ro,2560k(ramdisk)ro,-(userdisk)" #define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000" #define CONFIG_BOOTDELAY 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_IPADDR 192.168.1.100 #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.254 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_BOOTFILE uImage #define CONFIG_ETHADDR 00:13:48:aa:bb:cc #define CONFIG_ENV_OVERWRITE 1 #define BOARD_LATE_INIT #define CONFIG_EXTRA_ENV_SETTINGS \ "unlock=yes\0" #define CFG_CMD_JFFS2 #undef CONFIG_CMD_EEPROM #define CONFIG_CMD_NET #define CONFIG_CMD_RUN #define CONFIG_CMD_DHCP #define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM #define CONFIG_CMD_DIAG #define CONFIG_CMD_I2C #define CONFIG_CMD_DATE #define CONFIG_CMD_POST #define CONFIG_CMD_MISC #define CONFIG_CMD_LOADS #define CONFIG_CMD_IMI #define CONFIG_CMD_NFS #define CONFIG_CMD_FLASH #define CONFIG_CMD_ENV #define CFG_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CFG_PROMPT_HUSH_PS2 ">>" #define CFG_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ #define SECTORSIZE 512 #define ADDR_COLUMN 1 #define ADDR_PAGE 2 #define ADDR_COLUMN_PAGE 3 #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ #define CFG_MEMTEST_START 0x21000000 /* PHYS_SDRAM */ /* CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */ #define CFG_MEMTEST_END 0x00100000 #define CONFIG_DRIVER_ETHER #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91C_USE_RMII #define PHYS_FLASH_1 0x10000000 #define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ #define CFG_FLASH_BASE PHYS_FLASH_1 #define CFG_MAX_FLASH_BANKS 1 #define CFG_MAX_FLASH_SECT 256 #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ #ifdef CFG_ENV_IS_IN_DATAFLASH #define CFG_ENV_OFFSET 0x20000 #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) #define CFG_ENV_SIZE 0x2000 #else #define CFG_ENV_IS_IN_FLASH #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000) #define CFG_ENV_SIZE 2048 #endif #ifdef CFG_ENV_IS_IN_EEPROM #define CFG_ENV_OFFSET 1024 #define CFG_ENV_SIZE 1024 #endif #define CFG_LOAD_ADDR 0x21000000 /* default load address */ /* use for protect flash sectors */ #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ #define CFG_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 } #define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CFG_CBSIZE 512 /* Console I/O Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) #define CFG_HZ 1000 #define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #error CONFIG_USE_IRQ not supported #endif #endif