/* * (C) Copyright 2003-2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * This file contains the configuration parameters for the INCA-IP board. */ #ifndef __CONFIG_H #define __CONFIG_H #define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ #define CONFIG_INCA_IP 1 /* on a INCA-IP Board */ #ifndef CPU_CLOCK_RATE /* allowed values: 100000000, 133000000, and 150000000 */ #define CPU_CLOCK_RATE 150000000 /* default: 150 MHz clock for the MIPS core */ #endif #define INFINEON_EBU_BOOTCFG 0x40C4 /* CMULT = 8 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BAUDRATE 115200 /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off\0" \ "addmisc=setenv bootargs ${bootargs} " \ "console=ttyS0,${baudrate} " \ "ethaddr=${ethaddr} " \ "panic=1\0" \ "flash_nfs=run nfsargs addip addmisc;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addmisc;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 80500000 ${bootfile};" \ "run nfsargs addip addmisc;bootm\0" \ "rootpath=/opt/eldk/mips_4KC\0" \ "bootfile=/tftpboot/INCA/uImage\0" \ "kernel_addr=B0040000\0" \ "ramdisk_addr=B0100000\0" \ "u-boot=/tftpboot/INCA/u-boot.bin\0" \ "load=tftp 80500000 ${u-boot}\0" \ "update=protect off 1:0-2;era 1:0-2;" \ "cp.b 80500000 B0000000 ${filesize}\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "INCA-IP # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ #define CONFIG_SYS_MALLOC_LEN 128*1024 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 #define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2) #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */ #define CONFIG_SYS_MEMTEST_START 0x80100000 #define CONFIG_SYS_MEMTEST_END 0x80800000 /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ #define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */ /* The following #defines are needed to get flash environment right */ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_ENV_IS_IN_FLASH 1 /* Address and size of Primary Environment Sector */ #define CONFIG_ENV_ADDR 0xB0030000 #define CONFIG_ENV_SIZE 0x10000 #define CONFIG_FLASH_16BIT #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_INCA_IP_SWITCH #define CONFIG_NET_MULTI #define CONFIG_INCA_IP_SWITCH_AMDIX /* * JFFS2 partitions */ /* No command line, one static partition, use all space on the device */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0" #define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \ "64k(env)," \ "768k(linux)," \ "1m@3m(rootfs)," \ "768k(linux2)," \ "3m@5m(rootfs2)" */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CONFIG_SYS_DCACHE_SIZE 4096 #define CONFIG_SYS_ICACHE_SIZE 4096 #define CONFIG_SYS_CACHELINE_SIZE 16 #endif /* __CONFIG_H */