/* * iPAQ h2200 board configuration * * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #define MACH_TYPE_H2200 341 #define CONFIG_MACH_TYPE MACH_TYPE_H2200 #define CONFIG_CPU_PXA25X 1 #define CONFIG_BOARD_H2200 #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_HZ 1000 #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 #define CONFIG_ENV_SIZE 0x00040000 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ /* * iPAQ 1st stage bootloader loads 2nd stage bootloader * at address 0xa0040000 but bootloader requires header * which is 0x1000 long. * * --- Header begin --- * .word 0xea0003fe ; b 0x1000 * * .org 0x40 * .ascii "ECEC" * * .org 0x1000 * --- Header end --- */ #define CONFIG_SYS_TEXT_BASE 0xa0041000 /* * Static chips */ #define CONFIG_SYS_MSC0_VAL 0x246c7ffc #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 /* * PCMCIA and CF Interfaces */ #define CONFIG_SYS_MECR_VAL 0x00000000 #define CONFIG_SYS_MCMEM0_VAL 0x00000000 #define CONFIG_SYS_MCMEM1_VAL 0x00000000 #define CONFIG_SYS_MCATT0_VAL 0x00000000 #define CONFIG_SYS_MCATT1_VAL 0x00000000 #define CONFIG_SYS_MCIO0_VAL 0x00000000 #define CONFIG_SYS_MCIO1_VAL 0x00000000 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 #define CONFIG_SYS_SXCNFG_VAL 0x00040004 #define CONFIG_SYS_MDREFR_VAL 0x0099E018 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB #define CONFIG_SYS_MDMRS_VAL 0x00220022 #define CONFIG_SYS_PSSR_VAL 0x00000000 #define CONFIG_SYS_CKEN 0x00004840 #define CONFIG_SYS_CCCR 0x00000161 /* * GPIOs */ #define CONFIG_SYS_GPSR0_VAL 0x01000000 #define CONFIG_SYS_GPSR1_VAL 0x00000000 #define CONFIG_SYS_GPSR2_VAL 0x00010000 #define CONFIG_SYS_GPCR0_VAL 0x00000000 #define CONFIG_SYS_GPCR1_VAL 0x00000000 #define CONFIG_SYS_GPCR2_VAL 0x00000000 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 #define CONFIG_SYS_GPDR2_VAL 0x000157FF #define CONFIG_SYS_GAFR0_L_VAL 0x80401000 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA #define CONFIG_SYS_GAFR2_L_VAL 0x20000000 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 /* * Serial port */ #define CONFIG_PXA_SERIAL #define CONFIG_FFUART #define CONFIG_CONS_INDEX 3 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } #define CONFIG_CMD_IMPORTENV 1 #define CONFIG_CMD_LOADB #define CONFIG_CMD_SOURCE #define CONFIG_CMD_RUN #define CONFIG_CMD_IMI #define CONFIG_FIT #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG /* Monitor Command Prompt */ #define CONFIG_SYS_PROMPT "> " #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "$ " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" #endif /* __CONFIG_H */