/* * (C) Copyright 2011 * eInfochips Ltd. <www.einfochips.com> * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> * * Based on Aspenite: * (C) Copyright 2010 * Marvell Semiconductor <www.marvell.com> * Written-by: Prafulla Wadaskar <prafulla@marvell.com> * Contributor: Mahavir Jain <mjain@marvell.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301 USA */ #ifndef __CONFIG_GPLUGD_H #define __CONFIG_GPLUGD_H /* * FIXME: fix for error caused due to recent update to mach-types.h */ #include <asm/mach-types.h> #ifdef MACH_TYPE_SHEEVAD #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." #else #define MACH_TYPE_SHEEVAD 2625 #endif /* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD" /* * High Level Configuration Options */ #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ #define CONFIG_ARMADA100 1 /* SOC Family Name */ #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ #define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_TEXT_BASE 0x00f00000 /* * There is no internal RAM in ARMADA100, using DRAM * TBD: dcache to be used for this */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) #define CONFIG_NR_DRAM_BANKS_MAX 2 /* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> #define CONFIG_CMD_I2C #undef CONFIG_CMD_FPGA #define CONFIG_CMD_USB #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT /* Disable DCACHE */ #define CONFIG_SYS_DCACHE_OFF /* Network configuration */ #ifdef CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_ARMADA100_FEC /* DHCP Support */ #define CONFIG_CMD_DHCP #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 #endif /* CONFIG_CMD_NET */ /* GPIO Support */ #define CONFIG_MARVELL_GPIO /* PHY configuration */ #define CONFIG_MII #define CONFIG_CMD_MII #define CONFIG_RESET_PHY_R /* 88E3015 register definition */ #define PHY_LED_PAR_SEL_REG 22 #define PHY_LED_MAN_REG 25 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ /* GPIO Configuration for PHY */ #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ /* SPI Support */ #define CONFIG_ARMADA100_SPI #define CONFIG_ENV_SPI_CS 110 #define CONFIG_SYS_SSP_PORT 2 /* Flash Support */ #define CONFIG_CMD_SF #define CONFIG_SPI_FLASH_ATMEL /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" #undef CONFIG_ARCH_MISC_INIT #ifdef CONFIG_SYS_NS16550_COM1 #undef CONFIG_SYS_NS16550_COM1 #endif /* CONFIG_SYS_NS16550_COM1 */ #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE /* * Environment variables configurations */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SECT_SIZE 0x4000 #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_ENV_OFFSET 0x07C000 #define CONFIG_CMD_ASKENV #define CONFIG_CMD_EDITENV #define CONFIG_CMD_SAVEENV #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_ARMADA100 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif /* CONFIG_CMD_USB */ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION #define CONFIG_SUPPORT_VFAT #endif /* __CONFIG_GPLUGD_H */