/* * Copyright (C) 2013 Samsung Electronics * * Configuration settings for the SAMSUNG EXYNOS5 board. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H /* High Level Configuration Options */ #define CONFIG_SAMSUNG /* in a SAMSUNG core */ #define CONFIG_S5P /* S5P Family */ #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ #include <asm/arch/cpu.h> /* get chip and board defs */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_BOARD_COMMON #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_EXYNOS_SPL /* Enable fdt support for Exynos5250 */ #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* Allow tracing to be enabled */ #define CONFIG_TRACE #define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) #define CONFIG_TRACE_EARLY_SIZE (8 << 20) #define CONFIG_TRACE_EARLY #define CONFIG_TRACE_EARLY_ADDR 0x50000000 /* Keep L2 Cache Disabled */ #define CONFIG_SYS_DCACHE_OFF #define CONFIG_SYS_CACHELINE_SIZE 64 /* Enable ACE acceleration for SHA1 and SHA256 */ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_SHA_HW_ACCEL /* input clock of PLL: SMDK5250 has 24MHz input clock */ #define CONFIG_SYS_CLK_FREQ 24000000 #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 #define S5P_CHECK_LPA 0xABAD0000 /* Offset for inform registers */ #define INFORM0_OFFSET 0x800 #define INFORM1_OFFSET 0x804 #define INFORM2_OFFSET 0x808 #define INFORM3_OFFSET 0x80c /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) /* select serial console configuration */ #define CONFIG_BAUDRATE 115200 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 #define CONFIG_SILENT_CONSOLE /* Enable keyboard */ #define CONFIG_CROS_EC /* CROS_EC protocol */ #define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ #define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ #define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */ #define CONFIG_CMD_CROS_EC #define CONFIG_KEYBOARD /* Console configuration */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define EXYNOS_DEVICE_SETTINGS \ "stdin=serial,cros-ec-keyb\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" #define CONFIG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC #define CONFIG_MMC #define CONFIG_SDHCI #define CONFIG_S5P_SDHCI #define CONFIG_DWMMC #define CONFIG_EXYNOS_DWMMC #define CONFIG_SUPPORT_EMMC_BOOT #define CONFIG_BOUNCE_BUFFER #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SKIP_LOWLEVEL_INIT /* PWM */ #define CONFIG_PWM /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE /* Command definition*/ #include <config_cmd_default.h> #define CONFIG_CMD_PING #define CONFIG_CMD_ELF #define CONFIG_CMD_MMC #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_NET #define CONFIG_CMD_HASH #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* Thermal Management Unit */ #define CONFIG_EXYNOS_TMU #define CONFIG_CMD_DTT #define CONFIG_TMU_CMD_DTT /* TPM */ #define CONFIG_TPM #define CONFIG_CMD_TPM #define CONFIG_TPM_TIS_I2C #define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3 #define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20 /* MMC SPL */ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT /* specific .lds file */ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) #define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE #define CONFIG_SYS_MONITOR_BASE 0x00000000 /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH #undef CONFIG_CMD_IMLS #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SECURE_BL1_ONLY /* Secure FW size configuration */ #ifdef CONFIG_SECURE_BL1_ONLY #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ #else #define CONFIG_SEC_FW_SIZE 0 #endif /* Configuration of BL1, BL2, ENV Blocks on mmc */ #define CONFIG_RES_BLOCK_SIZE (512) #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) /* U-boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) #define CONFIG_SPI_BOOTING #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION #define CONFIG_CMD_PART #define CONFIG_PARTITION_UUIDS /* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 #define CONFIG_I2C_EDID /* SPI */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #ifdef CONFIG_SPI_FLASH #define CONFIG_EXYNOS_SPI #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SPI_FLASH_GIGADEVICE #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 50000000 #define EXYNOS5_SPI_NUM_CONTROLLERS 5 #define CONFIG_OF_SPI #endif #ifdef CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_MODE SPI_MODE_0 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE #define CONFIG_ENV_SPI_BUS 1 #define CONFIG_ENV_SPI_MAX_HZ 50000000 #endif /* PMIC */ #define CONFIG_POWER #define CONFIG_POWER_I2C /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_SMC911X #define CONFIG_SMC911X_BASE 0x5000000 #define CONFIG_SMC911X_16_BIT #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ /* Enable PXE Support */ #ifdef CONFIG_CMD_NET #define CONFIG_CMD_PXE #define CONFIG_MENU #endif /* Enable devicetree support */ #define CONFIG_OF_LIBFDT /* SHA hashing */ #define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY #define CONFIG_SHA1 #define CONFIG_SHA256 /* Enable Time Command */ #define CONFIG_CMD_TIME #define CONFIG_CMD_BOOTZ #endif /* __CONFIG_H */