/* * Copyright (C) 2011 * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net> * * Based on Kirkwood support: * (C) Copyright 2009 * Marvell Semiconductor <www.marvell.com> * Written-by: Prafulla Wadaskar <prafulla@marvell.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301 USA */ #ifndef _CONFIG_DNS325_H #define _CONFIG_DNS325_H /* * Machine number definition */ #define MACH_TYPE_DNS325 3800 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325 #define CONFIG_IDENT_STRING "\nD-Link DNS-325" /* * High Level Configuration Options (easy to change) */ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ #define CONFIG_KIRKWOOD /* SOC Family Name */ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB #define CONFIG_CMD_IDE #define CONFIG_CMD_DATE #define CONFIG_SYS_MVFS #define CONFIG_NR_DRAM_BANKS 1 /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ #undef CONFIG_SYS_PROMPT #define CONFIG_SYS_PROMPT "=> " /* * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_NETCONSOLE #endif /* * SATA Driver configuration */ #ifdef CONFIG_MVSATA_IDE #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* * RTC driver configuration */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_MV #endif /* * Enable GPI0 support */ #define CONFIG_KIRKWOOD_GPIO /* * Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER /* * Console configuration */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* * Enable device tree support */ #define CONFIG_OF_LIBFDT /* * Display cpu info at boot */ #define CONFIG_DISPLAY_CPUINFO /* * Environment variables configurations */ #ifdef CONFIG_CMD_NAND #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ #else #define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_ENV_SIZE 0x20000 /* 128KB */ #define CONFIG_ENV_ADDR 0xe0000 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ /* * Default environment variables */ #define MTDIDS_DEFAULT "nand0=orion_nand" #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \ "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0" #define CONFIG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ "loadaddr=0x800000\0" \ "autoload=no\0" \ "console=ttyS0,115200\0" \ "mtdparts="MTDPARTS_DEFAULT \ "optargs=\0" \ "bootenv=uEnv.txt\0" \ "importbootenv=echo Importing environment ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ "setbootargs=setenv bootargs console=${console} " \ "${optargs} " \ "${mtdparts} " \ "root=${bootenvroot} " \ "rootfstype=${bootenvrootfstype}\0" \ "subbootcmd=run setbootargs; " \ "if run bootenvloadimage; then " \ "bootm ${loadaddr};" \ "fi;\0" \ "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ "nandrootfstype=ubifs\0" \ "nandloadimage=nand read ${loadaddr} kernel\0" \ "setnandbootenv=echo Booting from nand ...; " \ "setenv bootenvroot ${nandroot}; " \ "setenv bootenvrootfstype ${nandrootfstype}; " \ "setenv bootenvloadimage ${nandloadimage}\0" #define CONFIG_BOOTCOMMAND \ "if test -n ${bootenv} && usb start; then " \ "if run loadbootenv; then " \ "echo Loaded environment ${bootenv} from usb;" \ "run importbootenv;" \ "fi;" \ "if test -n ${bootenvcmd}; then " \ "echo Running bootenvcmd ...;" \ "run bootenvcmd;" \ "fi;" \ "fi;" \ "run setnandbootenv subbootcmd;" #endif /* _CONFIG_DNS325_H */