/* * Copyright (C) 2014 Stefan Roese <sr@denx.de> * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _CONFIG_DB_MV7846MP_GP_H #define _CONFIG_DB_MV7846MP_GP_H /* * High Level Configuration Options (easy to change) */ #define CONFIG_ARMADA_XP /* SOC Family Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_SYS_TEXT_BASE 0x04000000 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_I2C #define CONFIG_CMD_PING #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_TFTPPUT #define CONFIG_CMD_TIME /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI #define CONFIG_I2C_MVTWSI_BASE MVEBU_TWSI_BASE #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 /* SPI NOR flash default params, used by sf commands */ #define CONFIG_SF_DEFAULT_SPEED 1000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 #define CONFIG_SPI_FLASH_STMICRO /* Environment in SPI NOR flash */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ #define CONFIG_PHY_BASE_ADDR 0x10 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ #define CONFIG_RESET_PHY_R #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" #endif /* _CONFIG_DB_MV7846MP_GP_H */