/* * (C) Copyright 2004, Li-Pro.Net * Stephan Linz * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /*********************************************************************** * Include the whole NIOS CPU configuration. * * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! * ***********************************************************************/ #if defined(CONFIG_NIOS_BASE_32) #include #else #error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration #endif /*------------------------------------------------------------------------ * BOARD/CPU -- TOP-LEVEL *----------------------------------------------------------------------*/ #define CONFIG_NIOS 1 /* NIOS-32 core */ #define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */ #define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */ #define CONFIG_SYS_HZ 1000 /* 1 msec time tick */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ /*------------------------------------------------------------------------ * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0) #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE #else #error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config #endif #if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE) #define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE #define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE #else #undef CONFIG_SYS_SRAM_BASE #undef CONFIG_SYS_SRAM_SIZE #endif #define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE /*------------------------------------------------------------------------ * MEMORY ORGANIZATION - For the most part, you can put things pretty * much anywhere. This is pretty flexible for Nios. So here we make some * arbitrary choices & assume that the monitor is placed at the end of * a memory resource (so you must make sure TEXT_BASE is chosen * appropriately -- this is very important if you plan to move your * memory to another place as configured at this time !!!). * * -The heap is placed below the monitor. * -Global data is placed below the heap. * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_MONITOR_BASE TEXT_BASE #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET /*------------------------------------------------------------------------ * FLASH (AM29LV065D) *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE #define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE #define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ #define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ #define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */ #else #error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config #endif /*------------------------------------------------------------------------ * ENVIRONMENT *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) #define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ /* Mem addr of environment */ #if defined(CONFIG_NIOS_BASE_32) #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) #else #error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR #endif #define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ #define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ #else #define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */ #endif /*------------------------------------------------------------------------ * NIOS APPLICATION CODE BASE AREA *----------------------------------------------------------------------*/ #if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000) #define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100" #define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000" #define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c" #define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff" #define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000" #define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff" #else #error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h #endif #define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios" /*------------------------------------------------------------------------ * BOOT ENVIRONMENT *----------------------------------------------------------------------*/ #ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ #define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; " #define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; " #else #define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF #define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK #endif #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND \ "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \ "then " \ "wd off; " \ CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \ "go $appl_entry_addr; " \ "else " \ CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \ "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\ "echo *** invalid application at $appl_entry_addr; " \ "echo *** stop bootup...; " \ "fi" /*------------------------------------------------------------------------ * EXTRA ENVIRONMENT *----------------------------------------------------------------------*/ #ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ #define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; " #define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; " #else #define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON #define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF #endif #define CONFIG_EXTRA_ENV_SETTINGS \ "update_allowed=0\0" \ "update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \ "appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \ "appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \ "appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \ "appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \ "appl_name=ADNPESC1/base32/linux.bin\0" \ "appl_update=" \ "if itest.b $update_allowed != 0; " \ "then " \ CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \ "tftp $update_load_addr $appl_name; " \ "protect off $appl_entry_addr $appl_end_addr; " \ "era $appl_entry_addr $appl_end_addr; " \ "cp.b $update_load_addr $appl_entry_addr $filesize; "\ CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \ "else " \ "echo *** update not allowed (update_allowed=$update_allowed); "\ "fi\0" \ "fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \ "fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \ "fs_name=ADNPESC1/base32/romfs.img\0" \ "fs_update=" \ "if itest.b $update_allowed != 0; " \ "then " \ CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \ "tftp $update_load_addr $fs_name; " \ "protect off $fs_base_addr $fs_end_addr; " \ "era $fs_base_addr $fs_end_addr; " \ "cp.b $update_load_addr $fs_base_addr $filesize; "\ CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \ "else " \ "echo *** update not allowed (update_allowed=$update_allowed); "\ "fi\0" \ "uboot_name=ADNPESC1/base32/u-boot.bin\0" \ "uboot_loadnrun=" \ "if ping $serverip; " \ "then " \ CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \ "tftp $update_load_addr $uboot_name; " \ "wd off; " \ "go $update_load_addr; " \ "else " \ "echo *** missing connection to $serverip; " \ "echo *** check your network and try again...; "\ "fi\0" /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0) #define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */ #if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0) #define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ #define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR #else #undef CONFIG_SYS_NIOS_FIXEDBAUD #define CONFIG_BAUDRATE 115200 #endif #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #else #error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config #endif /*------------------------------------------------------------------------ * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, * so an avalon bus timer is required. *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER) #if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0) #define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */ #define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ #if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ #if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ) #define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ) #else #error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ #endif #undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ #elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */ #if (CONFIG_SYS_HZ <= 1000) #define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) #else #error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 #endif #define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) #else #error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct #endif #elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1) #define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */ #define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ #if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ #if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ) #define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ) #else #error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ #endif #undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ #elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */ #if (CONFIG_SYS_HZ <= 1000) #define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) #else #error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 #endif #define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) #else #error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct #endif #endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */ #else #error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config #endif /*------------------------------------------------------------------------ * WATCHDOG (or better MAX823 supervisory circuite access) *----------------------------------------------------------------------*/ #define CONFIG_HW_WATCHDOG 1 /* board specific WD */ #ifdef CONFIG_HW_WATCHDOG /* MAX823 supervisor -- watchdog enable port at: */ #if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */ #elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9) #define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */ #else #error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config #endif /* MAX823 supervisor -- watchdog trigger port at: */ #if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */ #elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9) #define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */ #else #error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config #endif #if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */ #define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */ #define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */ #define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/ #else #error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h #endif #endif /* CONFIG_HW_WATCHDOG */ /*------------------------------------------------------------------------ * SERIAL PERIPHAREL INTERFACE *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1) #define CONFIG_NIOS_SPI 1 /* SPI support active */ #define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0 #define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS #define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */ #define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */ #else #undef CONFIG_NIOS_SPI /* NO SPI support */ #endif /*------------------------------------------------------------------------ * Ethernet -- needs work! *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1) #if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) #if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) #define CONFIG_SMC_USE_32_BIT 1 #else /* no */ #undef CONFIG_SMC_USE_32_BIT #endif #elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ /********************************************/ /* !!! CS8900 is __not__ tested on NIOS !!! */ /********************************************/ #define CONFIG_DRIVER_CS8900 /* Using CS8900 */ #define CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) #if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) #undef CS8900_BUS16 #define CS8900_BUS32 1 #else /* no */ #define CS8900_BUS16 1 #undef CS8900_BUS32 #endif #else #error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config #endif #define CONFIG_ETHADDR 02:80:ae:20:60:6f #define CONFIG_NETMASK 255.255.255.248 #define CONFIG_IPADDR 192.168.161.84 #define CONFIG_SERVERIP 192.168.161.85 #else #error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h #endif /*------------------------------------------------------------------------ * STATUS LEDs *----------------------------------------------------------------------*/ #if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO) #if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0) #define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0 #define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ #if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1) #define STATUS_LED_WRONLY 1 #else #undef STATUS_LED_WRONLY #endif #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1) #define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1 #define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ #if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1) #define STATUS_LED_WRONLY 1 #else #undef STATUS_LED_WRONLY #endif #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2) #define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2 #define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ #if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1) #define STATUS_LED_WRONLY 1 #else #undef STATUS_LED_WRONLY #endif #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3) #error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4) #error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5) #error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6) #error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7) #error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8) #error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h #elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9) #error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h #else #error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case #endif #define CONFIG_STATUS_LED 1 /* enable status led driver */ #define STATUS_LED_BIT (1 << 0) /* LED[0] */ #define STATUS_LED_STATE STATUS_LED_BLINKING #define STATUS_LED_BOOT_STATE STATUS_LED_OFF #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */ #define STATUS_LED_BOOT 0 /* boot LED */ #if (STATUS_LED_BITS > 1) #define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ #define STATUS_LED_STATE1 STATUS_LED_OFF #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */ #define STATUS_LED_RED 1 /* fail LED */ #endif #if (STATUS_LED_BITS > 2) #define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ #define STATUS_LED_STATE2 STATUS_LED_OFF #define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */ #define STATUS_LED_YELLOW 2 /* info LED */ #endif #if (STATUS_LED_BITS > 3) #define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ #define STATUS_LED_STATE3 STATUS_LED_OFF #define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */ #define STATUS_LED_GREEN 3 /* info LED */ #endif #define STATUS_LED_PAR 1 /* makes status_led.h happy */ #endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ /*------------------------------------------------------------------------ * Diagnostics / Power On Self Tests *----------------------------------------------------------------------*/ #define CONFIG_POST CONFIG_SYS_POST_RTC #define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #define CONFIG_CMD_BSP #define CONFIG_CMD_CDP #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_DISPLAY #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IMMAP #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING #define CONFIG_CMD_PORTIO #define CONFIG_CMD_REGINFO #define CONFIG_CMD_REISER #define CONFIG_CMD_SAVES #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP #undef CONFIG_CMD_NFS #undef CONFIG_CMD_XIMG #if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1) #define CONFIG_CMD_DATE #define CONFIG_CMD_SPI #endif /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif /*------------------------------------------------------------------------ * MISC *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser undef to save memory */ #define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 64 /* max number of command args*/ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> " #endif /* Default load address */ #if (CONFIG_SYS_SRAM_SIZE != 0) /* default in SRAM */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE #elif (CONFIG_SYS_SDRAM_SIZE != 0) /* default in SDRAM */ #if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) #if 1 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) #else #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000) #endif #else #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE #endif #else #undef CONFIG_SYS_LOAD_ADDR /* force error break */ #endif /* MEM test area */ #if (CONFIG_SYS_SDRAM_SIZE != 0) /* SDRAM begin to stack area (1MB stack) */ #if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) #if 0 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) #else #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000) #endif #else #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #endif #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) #else #undef CONFIG_SYS_MEMTEST_START /* force error break */ #undef CONFIG_SYS_MEMTEST_END #endif /* * JFFS2 partitions * */ /* No command line, one static partition */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "" #define MTDPARTS_DEFAULT "" */ #endif /* __CONFIG_H */