/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
 * Copyright (C) 2000 Silicon Graphics, Inc.
 * Modified for further R[236]000 support by Paul M. Antoine, 1996.
 * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
 * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
 * Copyright (C) 2003  Maciej W. Rozycki
 */
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H

#if 0
#include <linux/linkage.h>
#endif

/*
 * The following macros are especially useful for __asm__
 * inline assembler.
 */
#ifndef __STR
#define __STR(x) #x
#endif
#ifndef STR
#define STR(x) __STR(x)
#endif

/*
 * Coprocessor 0 register names
 */
#define CP0_INDEX $0
#define CP0_RANDOM $1
#define CP0_ENTRYLO0 $2
#define CP0_ENTRYLO1 $3
#define CP0_CONF $3
#define CP0_CONTEXT $4
#define CP0_PAGEMASK $5
#define CP0_WIRED $6
#define CP0_INFO $7
#define CP0_BADVADDR $8
#define CP0_COUNT $9
#define CP0_ENTRYHI $10
#define CP0_COMPARE $11
#define CP0_STATUS $12
#define CP0_CAUSE $13
#define CP0_EPC $14
#define CP0_PRID $15
#define CP0_CONFIG $16
#define CP0_LLADDR $17
#define CP0_WATCHLO $18
#define CP0_WATCHHI $19
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30

/*
 * R4640/R4650 cp0 register names.  These registers are listed
 * here only for completeness; without MMU these CPUs are not useable
 * by Linux.  A future ELKS port might take make Linux run on them
 * though ...
 */
#define CP0_IBASE $0
#define CP0_IBOUND $1
#define CP0_DBASE $2
#define CP0_DBOUND $3
#define CP0_CALG $17
#define CP0_IWATCH $18
#define CP0_DWATCH $19

/*
 * Coprocessor 0 Set 1 register names
 */
#define CP0_S1_DERRADDR0  $26
#define CP0_S1_DERRADDR1  $27
#define CP0_S1_INTCONTROL $20
/*
 * Coprocessor 1 (FPU) register names
 */
#define CP1_REVISION   $0
#define CP1_STATUS     $31

/*
 * FPU Status Register Values
 */
/*
 * Status Register Values
 */

#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
#define FPU_CSR_COND    0x00800000      /* $fcc0 */
#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
#define FPU_CSR_COND7   0x80000000      /* $fcc7 */

/*
 * X the exception cause indicator
 * E the exception enable
 * S the sticky/flag bit
*/
#define FPU_CSR_ALL_X 0x0003f000
#define FPU_CSR_UNI_X   0x00020000
#define FPU_CSR_INV_X   0x00010000
#define FPU_CSR_DIV_X   0x00008000
#define FPU_CSR_OVF_X   0x00004000
#define FPU_CSR_UDF_X   0x00002000
#define FPU_CSR_INE_X   0x00001000

#define FPU_CSR_ALL_E   0x00000f80
#define FPU_CSR_INV_E   0x00000800
#define FPU_CSR_DIV_E   0x00000400
#define FPU_CSR_OVF_E   0x00000200
#define FPU_CSR_UDF_E   0x00000100
#define FPU_CSR_INE_E   0x00000080

#define FPU_CSR_ALL_S   0x0000007c
#define FPU_CSR_INV_S   0x00000040
#define FPU_CSR_DIV_S   0x00000020
#define FPU_CSR_OVF_S   0x00000010
#define FPU_CSR_UDF_S   0x00000008
#define FPU_CSR_INE_S   0x00000004

/* rounding mode */
#define FPU_CSR_RN      0x0     /* nearest */
#define FPU_CSR_RZ      0x1     /* towards zero */
#define FPU_CSR_RU      0x2     /* towards +Infinity */
#define FPU_CSR_RD      0x3     /* towards -Infinity */


/*
 * Values for PageMask register
 */
#include <linux/config.h>
#ifdef CONFIG_CPU_VR41XX
#define PM_1K   0x00000000
#define PM_4K   0x00001800
#define PM_16K  0x00007800
#define PM_64K  0x0001f800
#define PM_256K 0x0007f800
#else
#define PM_4K   0x00000000
#define PM_16K  0x00006000
#define PM_64K  0x0001e000
#define PM_256K 0x0007e000
#define PM_1M   0x001fe000
#define PM_4M   0x007fe000
#define PM_16M  0x01ffe000
#endif

/*
 * Values used for computation of new tlb entries
 */
#define PL_4K   12
#define PL_16K  14
#define PL_64K  16
#define PL_256K 18
#define PL_1M   20
#define PL_4M   22
#define PL_16M  24

/*
 * Macros to access the system control coprocessor
 */
#define read_32bit_cp0_register(source)                         \
({ int __res;                                                   \
	__asm__ __volatile__(                                   \
	".set\tpush\n\t"					\
	".set\treorder\n\t"					\
	"mfc0\t%0,"STR(source)"\n\t"                            \
	".set\tpop"						\
	: "=r" (__res));                                        \
	__res;})

#define read_32bit_cp0_set1_register(source)                    \
({ int __res;                                                   \
	__asm__ __volatile__(                                   \
	".set\tpush\n\t"					\
	".set\treorder\n\t"					\
	"cfc0\t%0,"STR(source)"\n\t"                            \
	".set\tpop"						\
	: "=r" (__res));                                        \
	__res;})

/*
 * For now use this only with interrupts disabled!
 */
#define read_64bit_cp0_register(source)                         \
({ int __res;                                                   \
	__asm__ __volatile__(                                   \
	".set\tmips3\n\t"                                       \
	"dmfc0\t%0,"STR(source)"\n\t"                           \
	".set\tmips0"                                           \
	: "=r" (__res));                                        \
	__res;})

#define write_32bit_cp0_register(register,value)                \
	__asm__ __volatile__(                                   \
	"mtc0\t%0,"STR(register)"\n\t"				\
	"nop"							\
	: : "r" (value));

#define write_32bit_cp0_set1_register(register,value)           \
	__asm__ __volatile__(                                   \
	"ctc0\t%0,"STR(register)"\n\t"				\
	"nop"							\
	: : "r" (value));

#define write_64bit_cp0_register(register,value)                \
	__asm__ __volatile__(                                   \
	".set\tmips3\n\t"                                       \
	"dmtc0\t%0,"STR(register)"\n\t"                         \
	".set\tmips0"                                           \
	: : "r" (value))

/*
 * This should be changed when we get a compiler that support the MIPS32 ISA.
 */
#define read_mips32_cp0_config1()                               \
({ int __res;                                                   \
	__asm__ __volatile__(                                   \
	".set\tnoreorder\n\t"                                   \
	".set\tnoat\n\t"                                        \
	".word\t0x40018001\n\t"                                 \
	"move\t%0,$1\n\t"                                       \
	".set\tat\n\t"                                          \
	".set\treorder"                                         \
	:"=r" (__res));                                         \
	__res;})

#define tlb_write_indexed()                                     \
	__asm__ __volatile__(                                   \
		".set noreorder\n\t"                            \
		"tlbwi\n\t"                                     \
".set reorder")

/*
 * R4x00 interrupt enable / cause bits
 */
#define IE_SW0          (1<< 8)
#define IE_SW1          (1<< 9)
#define IE_IRQ0         (1<<10)
#define IE_IRQ1         (1<<11)
#define IE_IRQ2         (1<<12)
#define IE_IRQ3         (1<<13)
#define IE_IRQ4         (1<<14)
#define IE_IRQ5         (1<<15)

/*
 * R4x00 interrupt cause bits
 */
#define C_SW0           (1<< 8)
#define C_SW1           (1<< 9)
#define C_IRQ0          (1<<10)
#define C_IRQ1          (1<<11)
#define C_IRQ2          (1<<12)
#define C_IRQ3          (1<<13)
#define C_IRQ4          (1<<14)
#define C_IRQ5          (1<<15)

#ifndef _LANGUAGE_ASSEMBLY
/*
 * Manipulate the status register.
 * Mostly used to access the interrupt bits.
 */
#define __BUILD_SET_CP0(name,register)                          \
extern __inline__ unsigned int                                  \
set_cp0_##name(unsigned int set)				\
{                                                               \
	unsigned int res;                                       \
								\
	res = read_32bit_cp0_register(register);                \
	res |= set;						\
	write_32bit_cp0_register(register, res);        	\
								\
	return res;                                             \
}								\
								\
extern __inline__ unsigned int                                  \
clear_cp0_##name(unsigned int clear)				\
{                                                               \
	unsigned int res;                                       \
								\
	res = read_32bit_cp0_register(register);                \
	res &= ~clear;						\
	write_32bit_cp0_register(register, res);		\
								\
	return res;                                             \
}								\
								\
extern __inline__ unsigned int                                  \
change_cp0_##name(unsigned int change, unsigned int new)	\
{                                                               \
	unsigned int res;                                       \
								\
	res = read_32bit_cp0_register(register);                \
	res &= ~change;                                         \
	res |= (new & change);                                  \
	if(change)                                              \
		write_32bit_cp0_register(register, res);        \
								\
	return res;                                             \
}

__BUILD_SET_CP0(status,CP0_STATUS)
__BUILD_SET_CP0(cause,CP0_CAUSE)
__BUILD_SET_CP0(config,CP0_CONFIG)

#endif /* defined (_LANGUAGE_ASSEMBLY) */

/*
 * Bitfields in the R4xx0 cp0 status register
 */
#define ST0_IE			0x00000001
#define ST0_EXL			0x00000002
#define ST0_ERL			0x00000004
#define ST0_KSU			0x00000018
#  define KSU_USER		0x00000010
#  define KSU_SUPERVISOR	0x00000008
#  define KSU_KERNEL		0x00000000
#define ST0_UX			0x00000020
#define ST0_SX			0x00000040
#define ST0_KX 			0x00000080
#define ST0_DE			0x00010000
#define ST0_CE			0x00020000

/*
 * Bitfields in the R[23]000 cp0 status register.
 */
#define ST0_IEC                 0x00000001
#define ST0_KUC			0x00000002
#define ST0_IEP			0x00000004
#define ST0_KUP			0x00000008
#define ST0_IEO			0x00000010
#define ST0_KUO			0x00000020
/* bits 6 & 7 are reserved on R[23]000 */
#define ST0_ISC			0x00010000
#define ST0_SWC			0x00020000
#define ST0_CM			0x00080000

/*
 * Bits specific to the R4640/R4650
 */
#define ST0_UM                 (1   <<  4)
#define ST0_IL                 (1   << 23)
#define ST0_DL                 (1   << 24)

/*
 * Bitfields in the TX39 family CP0 Configuration Register 3
 */
#define TX39_CONF_ICS_SHIFT	19
#define TX39_CONF_ICS_MASK	0x00380000
#define TX39_CONF_ICS_1KB 	0x00000000
#define TX39_CONF_ICS_2KB 	0x00080000
#define TX39_CONF_ICS_4KB 	0x00100000
#define TX39_CONF_ICS_8KB 	0x00180000
#define TX39_CONF_ICS_16KB 	0x00200000

#define TX39_CONF_DCS_SHIFT	16
#define TX39_CONF_DCS_MASK	0x00070000
#define TX39_CONF_DCS_1KB 	0x00000000
#define TX39_CONF_DCS_2KB 	0x00010000
#define TX39_CONF_DCS_4KB 	0x00020000
#define TX39_CONF_DCS_8KB 	0x00030000
#define TX39_CONF_DCS_16KB 	0x00040000

#define TX39_CONF_CWFON 	0x00004000
#define TX39_CONF_WBON  	0x00002000
#define TX39_CONF_RF_SHIFT	10
#define TX39_CONF_RF_MASK	0x00000c00
#define TX39_CONF_DOZE		0x00000200
#define TX39_CONF_HALT		0x00000100
#define TX39_CONF_LOCK		0x00000080
#define TX39_CONF_ICE		0x00000020
#define TX39_CONF_DCE		0x00000010
#define TX39_CONF_IRSIZE_SHIFT	2
#define TX39_CONF_IRSIZE_MASK	0x0000000c
#define TX39_CONF_DRSIZE_SHIFT	0
#define TX39_CONF_DRSIZE_MASK	0x00000003

/*
 * Status register bits available in all MIPS CPUs.
 */
#define ST0_IM			0x0000ff00
#define  STATUSB_IP0		8
#define  STATUSF_IP0		(1   <<  8)
#define  STATUSB_IP1		9
#define  STATUSF_IP1		(1   <<  9)
#define  STATUSB_IP2		10
#define  STATUSF_IP2		(1   << 10)
#define  STATUSB_IP3		11
#define  STATUSF_IP3		(1   << 11)
#define  STATUSB_IP4		12
#define  STATUSF_IP4		(1   << 12)
#define  STATUSB_IP5		13
#define  STATUSF_IP5		(1   << 13)
#define  STATUSB_IP6		14
#define  STATUSF_IP6		(1   << 14)
#define  STATUSB_IP7		15
#define  STATUSF_IP7		(1   << 15)
#define  STATUSB_IP8		0
#define  STATUSF_IP8		(1   << 0)
#define  STATUSB_IP9		1
#define  STATUSF_IP9		(1   << 1)
#define  STATUSB_IP10		2
#define  STATUSF_IP10		(1   << 2)
#define  STATUSB_IP11		3
#define  STATUSF_IP11		(1   << 3)
#define  STATUSB_IP12		4
#define  STATUSF_IP12		(1   << 4)
#define  STATUSB_IP13		5
#define  STATUSF_IP13		(1   << 5)
#define  STATUSB_IP14		6
#define  STATUSF_IP14		(1   << 6)
#define  STATUSB_IP15		7
#define  STATUSF_IP15		(1   << 7)
#define ST0_CH			0x00040000
#define ST0_SR			0x00100000
#define ST0_BEV			0x00400000
#define ST0_RE			0x02000000
#define ST0_FR			0x04000000
#define ST0_CU			0xf0000000
#define ST0_CU0			0x10000000
#define ST0_CU1			0x20000000
#define ST0_CU2			0x40000000
#define ST0_CU3			0x80000000
#define ST0_XX			0x80000000	/* MIPS IV naming */

/*
 * Bitfields and bit numbers in the coprocessor 0 cause register.
 *
 * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
 */
#define  CAUSEB_EXCCODE		2
#define  CAUSEF_EXCCODE		(31  <<  2)
#define  CAUSEB_IP		8
#define  CAUSEF_IP		(255 <<  8)
#define  CAUSEB_IP0		8
#define  CAUSEF_IP0		(1   <<  8)
#define  CAUSEB_IP1		9
#define  CAUSEF_IP1		(1   <<  9)
#define  CAUSEB_IP2		10
#define  CAUSEF_IP2		(1   << 10)
#define  CAUSEB_IP3		11
#define  CAUSEF_IP3		(1   << 11)
#define  CAUSEB_IP4		12
#define  CAUSEF_IP4		(1   << 12)
#define  CAUSEB_IP5		13
#define  CAUSEF_IP5		(1   << 13)
#define  CAUSEB_IP6		14
#define  CAUSEF_IP6		(1   << 14)
#define  CAUSEB_IP7		15
#define  CAUSEF_IP7		(1   << 15)
#define  CAUSEB_IV		23
#define  CAUSEF_IV		(1   << 23)
#define  CAUSEB_CE		28
#define  CAUSEF_CE		(3   << 28)
#define  CAUSEB_BD		31
#define  CAUSEF_BD		(1   << 31)

/*
 * Bits in the coprozessor 0 config register.
 */
#define CONF_CM_CACHABLE_NO_WA		0
#define CONF_CM_CACHABLE_WA		1
#define CONF_CM_UNCACHED		2
#define CONF_CM_CACHABLE_NONCOHERENT	3
#define CONF_CM_CACHABLE_CE		4
#define CONF_CM_CACHABLE_COW		5
#define CONF_CM_CACHABLE_CUW		6
#define CONF_CM_CACHABLE_ACCELERATED	7
#define CONF_CM_CMASK			7
#define CONF_DB				(1 <<  4)
#define CONF_IB				(1 <<  5)
#define CONF_SC				(1 << 17)
#define CONF_AC                         (1 << 23)
#define CONF_HALT                       (1 << 25)

/*
 * R10000 performance counter definitions.
 *
 * FIXME: The R10000 performance counter opens a nice way to implement CPU
 *        time accounting with a precission of one cycle.  I don't have
 *        R10000 silicon but just a manual, so ...
 */

/*
 * Events counted by counter #0
 */
#define CE0_CYCLES			0
#define CE0_INSN_ISSUED			1
#define CE0_LPSC_ISSUED			2
#define CE0_S_ISSUED			3
#define CE0_SC_ISSUED			4
#define CE0_SC_FAILED			5
#define CE0_BRANCH_DECODED		6
#define CE0_QW_WB_SECONDARY		7
#define CE0_CORRECTED_ECC_ERRORS	8
#define CE0_ICACHE_MISSES		9
#define CE0_SCACHE_I_MISSES		10
#define CE0_SCACHE_I_WAY_MISSPREDICTED	11
#define CE0_EXT_INTERVENTIONS_REQ	12
#define CE0_EXT_INVALIDATE_REQ		13
#define CE0_VIRTUAL_COHERENCY_COND	14
#define CE0_INSN_GRADUATED		15

/*
 * Events counted by counter #1
 */
#define CE1_CYCLES			0
#define CE1_INSN_GRADUATED		1
#define CE1_LPSC_GRADUATED		2
#define CE1_S_GRADUATED			3
#define CE1_SC_GRADUATED		4
#define CE1_FP_INSN_GRADUATED		5
#define CE1_QW_WB_PRIMARY		6
#define CE1_TLB_REFILL			7
#define CE1_BRANCH_MISSPREDICTED	8
#define CE1_DCACHE_MISS			9
#define CE1_SCACHE_D_MISSES		10
#define CE1_SCACHE_D_WAY_MISSPREDICTED	11
#define CE1_EXT_INTERVENTION_HITS	12
#define CE1_EXT_INVALIDATE_REQ		13
#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS	14
#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS	15

/*
 * These flags define in which priviledge mode the counters count events
 */
#define CEB_USER	8	/* Count events in user mode, EXL = ERL = 0 */
#define CEB_SUPERVISOR	4	/* Count events in supvervisor mode EXL = ERL = 0 */
#define CEB_KERNEL	2	/* Count events in kernel mode EXL = ERL = 0 */
#define CEB_EXL		1	/* Count events with EXL = 1, ERL = 0 */

#endif /* _ASM_MIPSREGS_H */