/*- * Copyright (c) 2007-2008, Juniper Networks, Inc. * Copyright (c) 2008, Michael Trimarchi * All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef USB_EHCI_H #define USB_EHCI_H #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #endif /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ #define DeviceRequest \ ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8) #define DeviceOutRequest \ ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE) << 8) #define InterfaceRequest \ ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) #define EndpointRequest \ ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) #define EndpointOutRequest \ ((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8) /* * Register Space. */ struct ehci_hccr { uint32_t cr_capbase; #define HC_LENGTH(p) (((p) >> 0) & 0x00ff) #define HC_VERSION(p) (((p) >> 16) & 0xffff) uint32_t cr_hcsparams; #define HCS_PPC(p) ((p) & (1 << 4)) #define HCS_INDICATOR(p) ((p) & (1 << 16)) /* Port indicators */ #define HCS_N_PORTS(p) (((p) >> 0) & 0xf) uint32_t cr_hccparams; uint8_t cr_hcsp_portrt[8]; } __attribute__ ((packed, aligned(4))); struct ehci_hcor { uint32_t or_usbcmd; #define CMD_PARK (1 << 11) /* enable "park" */ #define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */ #define CMD_ASE (1 << 5) /* async schedule enable */ #define CMD_LRESET (1 << 7) /* partial reset */ #define CMD_IAAD (1 << 5) /* "doorbell" interrupt */ #define CMD_PSE (1 << 4) /* periodic schedule enable */ #define CMD_RESET (1 << 1) /* reset HC not bus */ #define CMD_RUN (1 << 0) /* start/stop HC */ uint32_t or_usbsts; #define STS_ASS (1 << 15) #define STS_PSS (1 << 14) #define STS_HALT (1 << 12) uint32_t or_usbintr; #define INTR_UE (1 << 0) /* USB interrupt enable */ #define INTR_UEE (1 << 1) /* USB error interrupt enable */ #define INTR_PCE (1 << 2) /* Port change detect enable */ #define INTR_SEE (1 << 4) /* system error enable */ #define INTR_AAE (1 << 5) /* Interrupt on async adavance enable */ uint32_t or_frindex; uint32_t or_ctrldssegment; uint32_t or_periodiclistbase; uint32_t or_asynclistaddr; uint32_t _reserved_0_; uint32_t or_burstsize; uint32_t or_txfilltuning; #define TXFIFO_THRESH_MASK (0x3f << 16) #define TXFIFO_THRESH(p) ((p & 0x3f) << 16) uint32_t _reserved_1_[6]; uint32_t or_configflag; #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS]; #define PORTSC_PSPD(x) (((x) >> 26) & 0x3) #define PORTSC_PSPD_FS 0x0 #define PORTSC_PSPD_LS 0x1 #define PORTSC_PSPD_HS 0x2 uint32_t or_systune; } __attribute__ ((packed, aligned(4))); #define USBMODE 0x68 /* USB Device mode */ #define USBMODE_SDIS (1 << 3) /* Stream disable */ #define USBMODE_BE (1 << 2) /* BE/LE endiannes select */ #define USBMODE_CM_HC (3 << 0) /* host controller mode */ #define USBMODE_CM_IDLE (0 << 0) /* idle state */ /* Interface descriptor */ struct usb_linux_interface_descriptor { unsigned char bLength; unsigned char bDescriptorType; unsigned char bInterfaceNumber; unsigned char bAlternateSetting; unsigned char bNumEndpoints; unsigned char bInterfaceClass; unsigned char bInterfaceSubClass; unsigned char bInterfaceProtocol; unsigned char iInterface; } __attribute__ ((packed)); /* Configuration descriptor information.. */ struct usb_linux_config_descriptor { unsigned char bLength; unsigned char bDescriptorType; unsigned short wTotalLength; unsigned char bNumInterfaces; unsigned char bConfigurationValue; unsigned char iConfiguration; unsigned char bmAttributes; unsigned char MaxPower; } __attribute__ ((packed)); #if defined CONFIG_EHCI_DESC_BIG_ENDIAN #define ehci_readl(x) (*((volatile u32 *)(x))) #define ehci_writel(a, b) (*((volatile u32 *)(a)) = ((volatile u32)b)) #else #define ehci_readl(x) cpu_to_le32((*((volatile u32 *)(x)))) #define ehci_writel(a, b) (*((volatile u32 *)(a)) = \ cpu_to_le32(((volatile u32)b))) #endif #if defined CONFIG_EHCI_MMIO_BIG_ENDIAN #define hc32_to_cpu(x) be32_to_cpu((x)) #define cpu_to_hc32(x) cpu_to_be32((x)) #else #define hc32_to_cpu(x) le32_to_cpu((x)) #define cpu_to_hc32(x) cpu_to_le32((x)) #endif #define EHCI_PS_WKOC_E (1 << 22) /* RW wake on over current */ #define EHCI_PS_WKDSCNNT_E (1 << 21) /* RW wake on disconnect */ #define EHCI_PS_WKCNNT_E (1 << 20) /* RW wake on connect */ #define EHCI_PS_PO (1 << 13) /* RW port owner */ #define EHCI_PS_PP (1 << 12) /* RW,RO port power */ #define EHCI_PS_LS (3 << 10) /* RO line status */ #define EHCI_PS_PR (1 << 8) /* RW port reset */ #define EHCI_PS_SUSP (1 << 7) /* RW suspend */ #define EHCI_PS_FPR (1 << 6) /* RW force port resume */ #define EHCI_PS_OCC (1 << 5) /* RWC over current change */ #define EHCI_PS_OCA (1 << 4) /* RO over current active */ #define EHCI_PS_PEC (1 << 3) /* RWC port enable change */ #define EHCI_PS_PE (1 << 2) /* RW port enable */ #define EHCI_PS_CSC (1 << 1) /* RWC connect status change */ #define EHCI_PS_CS (1 << 0) /* RO connect status */ #define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) #define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == (1 << 10)) /* * Schedule Interface Space. * * IMPORTANT: Software must ensure that no interface data structure * reachable by the EHCI host controller spans a 4K page boundary! * * Periodic transfers (i.e. isochronous and interrupt transfers) are * not supported. */ /* Queue Element Transfer Descriptor (qTD). */ struct qTD { /* this part defined by EHCI spec */ uint32_t qt_next; /* see EHCI 3.5.1 */ #define QT_NEXT_TERMINATE 1 uint32_t qt_altnext; /* see EHCI 3.5.2 */ uint32_t qt_token; /* see EHCI 3.5.3 */ #define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */ #define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1) #define QT_TOKEN_TOTALBYTES(x) (((x) & 0x7fff) << 16) /* Total Bytes to Transfer */ #define QT_TOKEN_GET_TOTALBYTES(x) (((x) >> 16) & 0x7fff) #define QT_TOKEN_IOC(x) (((x) & 0x1) << 15) /* Interrupt On Complete */ #define QT_TOKEN_CPAGE(x) (((x) & 0x7) << 12) /* Current Page */ #define QT_TOKEN_CERR(x) (((x) & 0x3) << 10) /* Error Counter */ #define QT_TOKEN_PID(x) (((x) & 0x3) << 8) /* PID Code */ #define QT_TOKEN_PID_OUT 0x0 #define QT_TOKEN_PID_IN 0x1 #define QT_TOKEN_PID_SETUP 0x2 #define QT_TOKEN_STATUS(x) (((x) & 0xff) << 0) /* Status */ #define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff) #define QT_TOKEN_STATUS_ACTIVE 0x80 #define QT_TOKEN_STATUS_HALTED 0x40 #define QT_TOKEN_STATUS_DATBUFERR 0x20 #define QT_TOKEN_STATUS_BABBLEDET 0x10 #define QT_TOKEN_STATUS_XACTERR 0x08 #define QT_TOKEN_STATUS_MISSEDUFRAME 0x04 #define QT_TOKEN_STATUS_SPLITXSTATE 0x02 #define QT_TOKEN_STATUS_PERR 0x01 #define QT_BUFFER_CNT 5 uint32_t qt_buffer[QT_BUFFER_CNT]; /* see EHCI 3.5.4 */ uint32_t qt_buffer_hi[QT_BUFFER_CNT]; /* Appendix B */ /* pad struct for 32 byte alignment */ uint32_t unused[3]; }; #define EHCI_PAGE_SIZE 4096 /* Queue Head (QH). */ struct QH { uint32_t qh_link; #define QH_LINK_TERMINATE 1 #define QH_LINK_TYPE_ITD 0 #define QH_LINK_TYPE_QH 2 #define QH_LINK_TYPE_SITD 4 #define QH_LINK_TYPE_FSTN 6 uint32_t qh_endpt1; #define QH_ENDPT1_RL(x) (((x) & 0xf) << 28) /* NAK Count Reload */ #define QH_ENDPT1_C(x) (((x) & 0x1) << 27) /* Control Endpoint Flag */ #define QH_ENDPT1_MAXPKTLEN(x) (((x) & 0x7ff) << 16) /* Maximum Packet Length */ #define QH_ENDPT1_H(x) (((x) & 0x1) << 15) /* Head of Reclamation List Flag */ #define QH_ENDPT1_DTC(x) (((x) & 0x1) << 14) /* Data Toggle Control */ #define QH_ENDPT1_DTC_IGNORE_QTD_TD 0x0 #define QH_ENDPT1_DTC_DT_FROM_QTD 0x1 #define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */ #define QH_ENDPT1_EPS_FS 0x0 #define QH_ENDPT1_EPS_LS 0x1 #define QH_ENDPT1_EPS_HS 0x2 #define QH_ENDPT1_ENDPT(x) (((x) & 0xf) << 8) /* Endpoint Number */ #define QH_ENDPT1_I(x) (((x) & 0x1) << 7) /* Inactivate on Next Transaction */ #define QH_ENDPT1_DEVADDR(x) (((x) & 0x7f) << 0) /* Device Address */ uint32_t qh_endpt2; #define QH_ENDPT2_MULT(x) (((x) & 0x3) << 30) /* High-Bandwidth Pipe Multiplier */ #define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */ #define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */ #define QH_ENDPT2_UFCMASK(x) (((x) & 0xff) << 8) /* Split Completion Mask */ #define QH_ENDPT2_UFSMASK(x) (((x) & 0xff) << 0) /* Interrupt Schedule Mask */ uint32_t qh_curtd; struct qTD qh_overlay; /* * Add dummy fill value to make the size of this struct * aligned to 32 bytes */ union { uint8_t fill[16]; void *buffer; }; }; /* Low level init functions */ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor); int ehci_hcd_stop(int index); #endif /* USB_EHCI_H */