/* * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include extern s32 spi_get_cfg(struct imx_spi_dev_t *dev); static inline struct imx_spi_dev_t *to_imx_spi_slave(struct spi_slave *slave) { return container_of(slave, struct imx_spi_dev_t, slave); } static s32 spi_reset(struct spi_slave *slave) { u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); s32 div = 0, i, reg_ctrl; struct imx_spi_dev_t *dev = to_imx_spi_slave(slave); struct spi_reg_t *reg = &(dev->reg); int lim = 0; unsigned int baud_rate_div[] = { 4, 8, 16, 32, 64, 128, 256, 512 }; if (dev->freq == 0) { printf("Error: desired clock is 0\n"); return 1; } reg_ctrl = readl(dev->base + SPI_CON_REG); /* Reset spi */ writel(0, dev->base + SPI_CON_REG); writel((reg_ctrl | SPI_CTRL_EN), dev->base + SPI_CON_REG); lim = sizeof(baud_rate_div) / sizeof(unsigned int); if (clk_src > dev->freq) { div = clk_src / dev->freq; for (i = 0; i < lim; i++) { if (div <= baud_rate_div[i]) break; } } debug("div = %d\n", baud_rate_div[i]); reg_ctrl = (reg_ctrl & ~SPI_CTRL_SS_MASK) | (dev->ss << SPI_CTRL_SS_OFF); reg_ctrl = (reg_ctrl & ~SPI_CTRL_DATA_MASK) | (i << SPI_CTRL_DATA_OFF); reg_ctrl |= SPI_CTRL_MODE; /* always set to master mode !!!! */ reg_ctrl &= ~SPI_CTRL_EN; /* disable spi */ /* configuration register setup */ reg_ctrl = (reg_ctrl & ~SPI_CTRL_SSPOL) | (dev->ss_pol << SPI_CTRL_SSPOL_OFF); reg_ctrl = (reg_ctrl & ~SPI_CTRL_SSCTL) | (dev->ssctl << SPI_CTRL_SSCTL_OFF); reg_ctrl = (reg_ctrl & ~SPI_CTRL_SCLK_POL) | (dev-> sclkpol << SPI_CTRL_SCLK_POL_OFF); reg_ctrl = (reg_ctrl & ~SPI_CTRL_SCLK_PHA) | (dev-> sclkpha << SPI_CTRL_SCLK_PHA_OFF); debug("reg_ctrl = 0x%x\n", reg_ctrl); writel(reg_ctrl, dev->base + SPI_CON_REG); /* save control register */ reg->ctrl_reg = reg_ctrl; /* clear interrupt reg */ writel(0, dev->base + SPI_INT_REG); writel(SPI_INT_STAT_TC, dev->base + SPI_STAT_REG); return 0; } void spi_init(void) { } struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct imx_spi_dev_t *imx_spi_slave = NULL; if (!spi_cs_is_valid(bus, cs)) return NULL; imx_spi_slave = (struct imx_spi_dev_t *)malloc(sizeof(struct imx_spi_dev_t)); if (!imx_spi_slave) return NULL; imx_spi_slave->slave.bus = bus; imx_spi_slave->slave.cs = cs; spi_get_cfg(imx_spi_slave); spi_io_init(imx_spi_slave); spi_reset(&(imx_spi_slave->slave)); return &(imx_spi_slave->slave); } void spi_free_slave(struct spi_slave *slave) { struct imx_spi_dev_t *imx_spi_slave; if (slave) { imx_spi_slave = to_imx_spi_slave(slave); free(imx_spi_slave); } } int spi_claim_bus(struct spi_slave *slave) { return 0; } void spi_release_bus(struct spi_slave *slave) { } /* * SPI transfer: * * See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf * for more informations. */ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { s32 val = SPI_RETRY_TIMES; u32 *p_buf; u32 reg; s32 len = 0, ret_val = 0; s32 burst_bytes = bitlen >> 3; struct imx_spi_dev_t *dev = to_imx_spi_slave(slave); struct spi_reg_t *spi_reg = &(dev->reg); if (!slave) return -1; if ((bitlen % 8) != 0) burst_bytes++; if (burst_bytes > (dev->fifo_sz)) { printf("Error: maximum burst size is 0x%x bytes, asking 0x%x\n", dev->fifo_sz, burst_bytes); return -1; } if (flags & SPI_XFER_BEGIN) { spi_cs_activate(slave); if (spi_reg->ctrl_reg == 0) { printf ("Error: spi(base=0x%x) has not been initialized\n", dev->base); return -1; } spi_reg->ctrl_reg = (spi_reg->ctrl_reg & ~SPI_CTRL_BURST_MASK) | ((bitlen - 1) << SPI_CTRL_BURST_OFF); writel(spi_reg->ctrl_reg | SPI_CTRL_EN, dev->base + SPI_CON_REG); debug("ctrl_reg=0x%x\n", readl(dev->base + SPI_CON_REG)); /* move data to the tx fifo */ if (dout) { for (p_buf = (u32 *) dout, len = burst_bytes; len > 0; p_buf++, len -= 4) writel(*p_buf, dev->base + SPI_TX_DATA); } reg = readl(dev->base + SPI_CON_REG); reg |= SPI_CTRL_REG_XCH_BIT; /* set xch bit */ debug("control reg = 0x%08x\n", reg); writel(reg, dev->base + SPI_CON_REG); /* poll on the TC bit (transfer complete) */ while ((val-- > 0) && (((reg = readl(dev->base + SPI_STAT_REG)) & SPI_INT_STAT_TC) == 0)); /* clear the TC bit */ writel(reg | SPI_INT_STAT_TC, dev->base + SPI_STAT_REG); if (val <= 0) { printf ("Error: re-tried %d times without response. Give up\n", SPI_RETRY_TIMES); ret_val = -1; goto error; } } /* move data in the rx buf */ if (flags & SPI_XFER_END) { if (din) { for (p_buf = (u32 *) din, len = burst_bytes; len > 0; p_buf++, len -= 4) *p_buf = readl(dev->base + SPI_RX_DATA); } } error: spi_cs_deactivate(slave); return ret_val; } int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return 1; } void spi_cs_activate(struct spi_slave *slave) { struct imx_spi_dev_t *dev = to_imx_spi_slave(slave); spi_io_init(dev); } void spi_cs_deactivate(struct spi_slave *slave) { struct imx_spi_dev_t *dev = to_imx_spi_slave(slave); writel(0, dev->base + SPI_CON_REG); }