/*------------------------------------------------------------------------ . smc91111.c . This is a driver for SMSC's 91C111 single-chip Ethernet device. . . (C) Copyright 2002 . Sysgo Real-Time Solutions, GmbH <www.elinos.com> . Rolf Offermanns <rof@sysgo.de> . . Copyright (C) 2001 Standard Microsystems Corporation (SMSC) . Developed by Simple Network Magic Corporation (SNMC) . Copyright (C) 1996 by Erik Stahlman (ES) . . This program is free software; you can redistribute it and/or modify . it under the terms of the GNU General Public License as published by . the Free Software Foundation; either version 2 of the License, or . (at your option) any later version. . . This program is distributed in the hope that it will be useful, . but WITHOUT ANY WARRANTY; without even the implied warranty of . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the . GNU General Public License for more details. . . You should have received a copy of the GNU General Public License . along with this program; if not, write to the Free Software . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA . . Information contained in this file was obtained from the LAN91C111 . manual from SMC. To get a copy, if you really want one, you can find . information under www.smsc.com. . . . "Features" of the SMC chip: . Integrated PHY/MAC for 10/100BaseT Operation . Supports internal and external MII . Integrated 8K packet memory . EEPROM interface for configuration . . Arguments: . io = for the base address . irq = for the IRQ . . author: . Erik Stahlman ( erik@vt.edu ) . Daris A Nevil ( dnevil@snmc.com ) . . . Hardware multicast code from Peter Cammaert ( pc@denkart.be ) . . Sources: . o SMSC LAN91C111 databook (www.smsc.com) . o smc9194.c by Erik Stahlman . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov ) . . History: . 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks. . 10/17/01 Marco Hasewinkel Modify for DNP/1110 . 07/25/01 Woojung Huh Modify for ADS Bitsy . 04/25/01 Daris A Nevil Initial public release through SMSC . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111 ----------------------------------------------------------------------------*/ #include <common.h> #include <command.h> #include <config.h> #include "smc91111.h" #include <net.h> #ifdef CONFIG_DRIVER_SMC91111 /* Use power-down feature of the chip */ #define POWER_DOWN 0 #define NO_AUTOPROBE #define SMC_DEBUG 0 #if SMC_DEBUG > 1 static const char version[] = "smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n"; #endif /* Autonegotiation timeout in seconds */ #ifndef CONFIG_SMC_AUTONEG_TIMEOUT #define CONFIG_SMC_AUTONEG_TIMEOUT 10 #endif /*------------------------------------------------------------------------ . . Configuration options, for the experienced user to change. . -------------------------------------------------------------------------*/ /* . Wait time for memory to be free. This probably shouldn't be . tuned that much, as waiting for this means nothing else happens . in the system */ #define MEMORY_WAIT_TIME 16 #if (SMC_DEBUG > 2 ) #define PRINTK3(args...) printf(args) #else #define PRINTK3(args...) #endif #if SMC_DEBUG > 1 #define PRINTK2(args...) printf(args) #else #define PRINTK2(args...) #endif #ifdef SMC_DEBUG #define PRINTK(args...) printf(args) #else #define PRINTK(args...) #endif /*------------------------------------------------------------------------ . . The internal workings of the driver. If you are changing anything . here with the SMC stuff, you should have the datasheet and know . what you are doing. . -------------------------------------------------------------------------*/ #define CARDNAME "LAN91C111" /* Memory sizing constant */ #define LAN91C111_MEMORY_MULTIPLIER (1024*2) #ifndef CONFIG_SMC91111_BASE #define CONFIG_SMC91111_BASE 0x20000300 #endif #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE #define SMC_DEV_NAME "SMC91111" #define SMC_PHY_ADDR 0x0000 #define SMC_ALLOC_MAX_TRY 5 #define SMC_TX_TIMEOUT 30 #define SMC_PHY_CLOCK_DELAY 1000 #define ETH_ZLEN 60 #ifdef CONFIG_SMC_USE_32_BIT #define USE_32_BIT 1 #else #undef USE_32_BIT #endif /*----------------------------------------------------------------- . . The driver can be entered at any of the following entry points. . .------------------------------------------------------------------ */ extern int eth_init(bd_t *bd); extern void eth_halt(void); extern int eth_rx(void); extern int eth_send(volatile void *packet, int length); /* . This is called by register_netdev(). It is responsible for . checking the portlist for the SMC9000 series chipset. If it finds . one, then it will initialize the device, find the hardware information, . and sets up the appropriate device parameters. . NOTE: Interrupts are *OFF* when this procedure is called. . . NB:This shouldn't be static since it is referred to externally. */ int smc_init(void); /* . This is called by unregister_netdev(). It is responsible for . cleaning up before the driver is finally unregistered and discarded. */ void smc_destructor(void); /* . The kernel calls this function when someone wants to use the device, . typically 'ifconfig ethX up'. */ static int smc_open(bd_t *bd); /* . This is called by the kernel in response to 'ifconfig ethX down'. It . is responsible for cleaning up everything that the open routine . does, and maybe putting the card into a powerdown state. */ static int smc_close(void); /* . Configures the PHY through the MII Management interface */ #ifndef CONFIG_SMC91111_EXT_PHY static void smc_phy_configure(void); #endif /* !CONFIG_SMC91111_EXT_PHY */ /* . This is a separate procedure to handle the receipt of a packet, to . leave the interrupt code looking slightly cleaner */ static int smc_rcv(void); /* See if a MAC address is defined in the current environment. If so use it. If not . print a warning and set the environment and other globals with the default. . If an EEPROM is present it really should be consulted. */ int smc_get_ethaddr(bd_t *bd); int get_rom_mac(char *v_rom_mac); /* ------------------------------------------------------------ . . Internal routines . ------------------------------------------------------------ */ #ifdef CONFIG_SMC_USE_IOFUNCS /* * input and output functions * * Implemented due to inx,outx macros accessing the device improperly * and putting the device into an unkown state. * * For instance, on Sharp LPD7A400 SDK, affects were chip memory * could not be free'd (hence the alloc failures), duplicate packets, * packets being corrupt (shifted) on the wire, etc. Switching to the * inx,outx functions fixed this problem. */ static inline word SMC_inw(dword offset); static inline void SMC_outw(word value, dword offset); static inline byte SMC_inb(dword offset); static inline void SMC_outb(byte value, dword offset); static inline void SMC_insw(dword offset, volatile uchar* buf, dword len); static inline void SMC_outsw(dword offset, uchar* buf, dword len); #define barrier() __asm__ __volatile__("": : :"memory") static inline word SMC_inw(dword offset) { word v; v = *((volatile word*)(SMC_BASE_ADDRESS+offset)); barrier(); *(volatile u32*)(0xc0000000); return v; } static inline void SMC_outw(word value, dword offset) { *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value; barrier(); *(volatile u32*)(0xc0000000); } static inline byte SMC_inb(dword offset) { word _w; _w = SMC_inw(offset & ~((dword)1)); return (offset & 1) ? (byte)(_w >> 8) : (byte)(_w); } static inline void SMC_outb(byte value, dword offset) { word _w; _w = SMC_inw(offset & ~((dword)1)); if (offset & 1) *((volatile word*)(SMC_BASE_ADDRESS+(offset & ~((dword)1)))) = (value<<8) | (_w & 0x00ff); else *((volatile word*)(SMC_BASE_ADDRESS+offset)) = value | (_w & 0xff00); } static inline void SMC_insw(dword offset, volatile uchar* buf, dword len) { while (len-- > 0) { *((word*)buf)++ = SMC_inw(offset); barrier(); *((volatile u32*)(0xc0000000)); } } static inline void SMC_outsw(dword offset, uchar* buf, dword len) { while (len-- > 0) { SMC_outw(*((word*)buf)++, offset); barrier(); *(volatile u32*)(0xc0000000); } } #endif /* CONFIG_SMC_USE_IOFUNCS */ static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8}; /* * This function must be called before smc_open() if you want to override * the default mac address. */ void smc_set_mac_addr(const char *addr) { int i; for (i=0; i < sizeof(smc_mac_addr); i++){ smc_mac_addr[i] = addr[i]; } } /* * smc_get_macaddr is no longer used. If you want to override the default * mac address, call smc_get_mac_addr as a part of the board initialization. */ #if 0 void smc_get_macaddr( byte *addr ) { /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010); int i; for (i=0; i<6; i++) { addr[0] = *(dnp1110_mac+0); addr[1] = *(dnp1110_mac+1); addr[2] = *(dnp1110_mac+2); addr[3] = *(dnp1110_mac+3); addr[4] = *(dnp1110_mac+4); addr[5] = *(dnp1110_mac+5); } } #endif /* 0 */ /*********************************************** * Show available memory * ***********************************************/ void dump_memory_info(void) { word mem_info; word old_bank; old_bank = SMC_inw(BANK_SELECT)&0xF; SMC_SELECT_BANK(0); mem_info = SMC_inw( MIR_REG ); PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048); SMC_SELECT_BANK(old_bank); } /* . A rather simple routine to print out a packet for debugging purposes. */ #if SMC_DEBUG > 2 static void print_packet( byte *, int ); #endif #define tx_done(dev) 1 /* this does a soft reset on the device */ static void smc_reset( void ); /* Enable Interrupts, Receive, and Transmit */ static void smc_enable( void ); /* this puts the device in an inactive state */ static void smc_shutdown( void ); /* Routines to Read and Write the PHY Registers across the MII Management Interface */ #ifndef CONFIG_SMC91111_EXT_PHY static word smc_read_phy_register(byte phyreg); static void smc_write_phy_register(byte phyreg, word phydata); #endif /* !CONFIG_SMC91111_EXT_PHY */ static int poll4int (byte mask, int timeout) { int tmo = get_timer (0) + timeout * CFG_HZ; int is_timeout = 0; word old_bank = SMC_inw (BSR_REG); PRINTK2 ("Polling...\n"); SMC_SELECT_BANK (2); while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) { if (get_timer (0) >= tmo) { is_timeout = 1; break; } } /* restore old bank selection */ SMC_SELECT_BANK (old_bank); if (is_timeout) return 1; else return 0; } /* Only one release command at a time, please */ static inline void smc_wait_mmu_release_complete (void) { int count = 0; /* assume bank 2 selected */ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { udelay (1); /* Wait until not busy */ if (++count > 200) break; } } /* . Function: smc_reset( void ) . Purpose: . This sets the SMC91111 chip to its normal state, hopefully from whatever . mess that any other DOS driver has put it in. . . Maybe I should reset more registers to defaults in here? SOFTRST should . do that for me. . . Method: . 1. send a SOFT RESET . 2. wait for it to finish . 3. enable autorelease mode . 4. reset the memory management unit . 5. clear all interrupts . */ static void smc_reset (void) { PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME); /* This resets the registers mostly to defaults, but doesn't affect EEPROM. That seems unnecessary */ SMC_SELECT_BANK (0); SMC_outw (RCR_SOFTRST, RCR_REG); /* Setup the Configuration Register */ /* This is necessary because the CONFIG_REG is not affected */ /* by a soft reset */ SMC_SELECT_BANK (1); #if defined(CONFIG_SMC91111_EXT_PHY) SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG); #else SMC_outw (CONFIG_DEFAULT, CONFIG_REG); #endif /* Release from possible power-down state */ /* Configuration register is not affected by Soft Reset */ SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG); SMC_SELECT_BANK (0); /* this should pause enough for the chip to be happy */ udelay (10); /* Disable transmit and receive functionality */ SMC_outw (RCR_CLEAR, RCR_REG); SMC_outw (TCR_CLEAR, TCR_REG); /* set the control register */ SMC_SELECT_BANK (1); SMC_outw (CTL_DEFAULT, CTL_REG); /* Reset the MMU */ SMC_SELECT_BANK (2); smc_wait_mmu_release_complete (); SMC_outw (MC_RESET, MMU_CMD_REG); while (SMC_inw (MMU_CMD_REG) & MC_BUSY) udelay (1); /* Wait until not busy */ /* Note: It doesn't seem that waiting for the MMU busy is needed here, but this is a place where future chipsets _COULD_ break. Be wary of issuing another MMU command right after this */ /* Disable all interrupts */ SMC_outb (0, IM_REG); } /* . Function: smc_enable . Purpose: let the chip talk to the outside work . Method: . 1. Enable the transmitter . 2. Enable the receiver . 3. Enable interrupts */ static void smc_enable() { PRINTK2("%s: smc_enable\n", SMC_DEV_NAME); SMC_SELECT_BANK( 0 ); /* see the header file for options in TCR/RCR DEFAULT*/ SMC_outw( TCR_DEFAULT, TCR_REG ); SMC_outw( RCR_DEFAULT, RCR_REG ); /* clear MII_DIS */ /* smc_write_phy_register(PHY_CNTL_REG, 0x0000); */ } /* . Function: smc_shutdown . Purpose: closes down the SMC91xxx chip. . Method: . 1. zero the interrupt mask . 2. clear the enable receive flag . 3. clear the enable xmit flags . . TODO: . (1) maybe utilize power down mode. . Why not yet? Because while the chip will go into power down mode, . the manual says that it will wake up in response to any I/O requests . in the register space. Empirical results do not show this working. */ static void smc_shutdown() { PRINTK2(CARDNAME ": smc_shutdown\n"); /* no more interrupts for me */ SMC_SELECT_BANK( 2 ); SMC_outb( 0, IM_REG ); /* and tell the card to stay away from that nasty outside world */ SMC_SELECT_BANK( 0 ); SMC_outb( RCR_CLEAR, RCR_REG ); SMC_outb( TCR_CLEAR, TCR_REG ); } /* . Function: smc_hardware_send_packet(struct net_device * ) . Purpose: . This sends the actual packet to the SMC9xxx chip. . . Algorithm: . First, see if a saved_skb is available. . ( this should NOT be called if there is no 'saved_skb' . Now, find the packet number that the chip allocated . Point the data pointers at it in memory . Set the length word in the chip's memory . Dump the packet to chip memory . Check if a last byte is needed ( odd length packet ) . if so, set the control flag right . Tell the card to send it . Enable the transmit interrupt, so I know if it failed . Free the kernel data if I actually sent it. */ static int smc_send_packet (volatile void *packet, int packet_length) { byte packet_no; unsigned long ioaddr; byte *buf; int length; int numPages; int try = 0; int time_out; byte status; byte saved_pnr; word saved_ptr; /* save PTR and PNR registers before manipulation */ SMC_SELECT_BANK (2); saved_pnr = SMC_inb( PN_REG ); saved_ptr = SMC_inw( PTR_REG ); PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME); length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN; /* allocate memory ** The MMU wants the number of pages to be the number of 256 bytes ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) ) ** ** The 91C111 ignores the size bits, but the code is left intact ** for backwards and future compatibility. ** ** Pkt size for allocating is data length +6 (for additional status ** words, length and ctl!) ** ** If odd size then last byte is included in this header. */ numPages = ((length & 0xfffe) + 6); numPages >>= 8; /* Divide by 256 */ if (numPages > 7) { printf ("%s: Far too big packet error. \n", SMC_DEV_NAME); return 0; } /* now, try to allocate the memory */ SMC_SELECT_BANK (2); SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG); /* FIXME: the ALLOC_INT bit never gets set * * so the following will always give a * * memory allocation error. * * same code works in armboot though * * -ro */ again: try++; time_out = MEMORY_WAIT_TIME; do { status = SMC_inb (SMC91111_INT_REG); if (status & IM_ALLOC_INT) { /* acknowledge the interrupt */ SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG); break; } } while (--time_out); if (!time_out) { PRINTK2 ("%s: memory allocation, try %d failed ...\n", SMC_DEV_NAME, try); if (try < SMC_ALLOC_MAX_TRY) goto again; else return 0; } PRINTK2 ("%s: memory allocation, try %d succeeded ...\n", SMC_DEV_NAME, try); /* I can send the packet now.. */ ioaddr = SMC_BASE_ADDRESS; buf = (byte *) packet; /* If I get here, I _know_ there is a packet slot waiting for me */ packet_no = SMC_inb (AR_REG); if (packet_no & AR_FAILED) { /* or isn't there? BAD CHIP! */ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME); return 0; } /* we have a packet address, so tell the card to use it */ #ifndef CONFIG_XAENIAX SMC_outb (packet_no, PN_REG); #else /* On Xaeniax board, we can't use SMC_outb here because that way * the Allocate MMU command will end up written to the command register * as well, which will lead to a problem. */ SMC_outl (packet_no << 16, 0); #endif /* do not write new ptr value if Write data fifo not empty */ while ( saved_ptr & PTR_NOTEMPTY ) printf ("Write data fifo not empty!\n"); /* point to the beginning of the packet */ SMC_outw (PTR_AUTOINC, PTR_REG); PRINTK3 ("%s: Trying to xmit packet of length %x\n", SMC_DEV_NAME, length); #if SMC_DEBUG > 2 printf ("Transmitting Packet\n"); print_packet (buf, length); #endif /* send the packet length ( +6 for status, length and ctl byte ) and the status word ( set to zeros ) */ #ifdef USE_32_BIT SMC_outl ((length + 6) << 16, SMC91111_DATA_REG); #else SMC_outw (0, SMC91111_DATA_REG); /* send the packet length ( +6 for status words, length, and ctl */ SMC_outw ((length + 6), SMC91111_DATA_REG); #endif /* send the actual data . I _think_ it's faster to send the longs first, and then . mop up by sending the last word. It depends heavily . on alignment, at least on the 486. Maybe it would be . a good idea to check which is optimal? But that could take . almost as much time as is saved? */ #ifdef USE_32_BIT SMC_outsl (SMC91111_DATA_REG, buf, length >> 2); #ifndef CONFIG_XAENIAX if (length & 0x2) SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG); #else /* On XANEIAX, we can only use 32-bit writes, so we need to handle * unaligned tail part specially. The standard code doesn't work. */ if ((length & 3) == 3) { u16 * ptr = (u16*) &buf[length-3]; SMC_outl((*ptr) | ((0x2000 | buf[length-1]) << 16), SMC91111_DATA_REG); } else if ((length & 2) == 2) { u16 * ptr = (u16*) &buf[length-2]; SMC_outl(*ptr, SMC91111_DATA_REG); } else if (length & 1) { SMC_outl((0x2000 | buf[length-1]), SMC91111_DATA_REG); } else { SMC_outl(0, SMC91111_DATA_REG); } #endif #else SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1); #endif /* USE_32_BIT */ #ifndef CONFIG_XAENIAX /* Send the last byte, if there is one. */ if ((length & 1) == 0) { SMC_outw (0, SMC91111_DATA_REG); } else { SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG); } #endif /* and let the chipset deal with it */ SMC_outw (MC_ENQUEUE, MMU_CMD_REG); /* poll for TX INT */ /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */ /* poll for TX_EMPTY INT - autorelease enabled */ if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) { /* sending failed */ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME); /* release packet */ /* no need to release, MMU does that now */ #ifdef CONFIG_XAENIAX SMC_outw (MC_FREEPKT, MMU_CMD_REG); #endif /* wait for MMU getting ready (low) */ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { udelay (10); } PRINTK2 ("MMU ready\n"); return 0; } else { /* ack. int */ SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG); /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length); /* release packet */ /* no need to release, MMU does that now */ #ifdef CONFIG_XAENIAX SMC_outw (MC_FREEPKT, MMU_CMD_REG); #endif /* wait for MMU getting ready (low) */ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) { udelay (10); } PRINTK2 ("MMU ready\n"); } /* restore previously saved registers */ #ifndef CONFIG_XAENIAX SMC_outb( saved_pnr, PN_REG ); #else /* On Xaeniax board, we can't use SMC_outb here because that way * the Allocate MMU command will end up written to the command register * as well, which will lead to a problem. */ SMC_outl(saved_pnr << 16, 0); #endif SMC_outw( saved_ptr, PTR_REG ); return length; } /*------------------------------------------------------------------------- | | smc_destructor( struct net_device * dev ) | Input parameters: | dev, pointer to the device structure | | Output: | None. | --------------------------------------------------------------------------- */ void smc_destructor() { PRINTK2(CARDNAME ": smc_destructor\n"); } /* * Open and Initialize the board * * Set up everything, reset the card, etc .. * */ static int smc_open (bd_t * bd) { int i, err; PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME); /* reset the hardware */ smc_reset (); smc_enable (); /* Configure the PHY */ #ifndef CONFIG_SMC91111_EXT_PHY smc_phy_configure (); #endif /* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */ /* SMC_SELECT_BANK(0); */ /* SMC_outw(0, RPC_REG); */ SMC_SELECT_BANK (1); err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */ if (err < 0) { memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */ return (-1); /* upper code ignores this, but NOT bi_enetaddr */ } #ifdef USE_32_BIT for (i = 0; i < 6; i += 2) { word address; address = smc_mac_addr[i + 1] << 8; address |= smc_mac_addr[i]; SMC_outw (address, (ADDR0_REG + i)); } #else for (i = 0; i < 6; i++) SMC_outb (smc_mac_addr[i], (ADDR0_REG + i)); #endif return 0; } /*------------------------------------------------------------- . . smc_rcv - receive a packet from the card . . There is ( at least ) a packet waiting to be read from . chip-memory. . . o Read the status . o If an error, record it . o otherwise, read in the packet -------------------------------------------------------------- */ static int smc_rcv() { int packet_number; word status; word packet_length; int is_error = 0; #ifdef USE_32_BIT dword stat_len; #endif byte saved_pnr; word saved_ptr; SMC_SELECT_BANK(2); /* save PTR and PTR registers */ saved_pnr = SMC_inb( PN_REG ); saved_ptr = SMC_inw( PTR_REG ); packet_number = SMC_inw( RXFIFO_REG ); if ( packet_number & RXFIFO_REMPTY ) { return 0; } PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME); /* start reading from the start of the packet */ SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG ); /* First two words are status and packet_length */ #ifdef USE_32_BIT stat_len = SMC_inl(SMC91111_DATA_REG); status = stat_len & 0xffff; packet_length = stat_len >> 16; #else status = SMC_inw( SMC91111_DATA_REG ); packet_length = SMC_inw( SMC91111_DATA_REG ); #endif packet_length &= 0x07ff; /* mask off top bits */ PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length ); if ( !(status & RS_ERRORS ) ){ /* Adjust for having already read the first two words */ packet_length -= 4; /*4; */ /* set odd length for bug in LAN91C111, */ /* which never sets RS_ODDFRAME */ /* TODO ? */ #ifdef USE_32_BIT PRINTK3(" Reading %d dwords (and %d bytes) \n", packet_length >> 2, packet_length & 3 ); /* QUESTION: Like in the TX routine, do I want to send the DWORDs or the bytes first, or some mixture. A mixture might improve already slow PIO performance */ SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 ); /* read the left over bytes */ if (packet_length & 3) { int i; byte *tail = (byte *)(NetRxPackets[0] + (packet_length & ~3)); dword leftover = SMC_inl(SMC91111_DATA_REG); for (i=0; i<(packet_length & 3); i++) *tail++ = (byte) (leftover >> (8*i)) & 0xff; } #else PRINTK3(" Reading %d words and %d byte(s) \n", (packet_length >> 1 ), packet_length & 1 ); SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1); #endif /* USE_32_BIT */ #if SMC_DEBUG > 2 printf("Receiving Packet\n"); print_packet( NetRxPackets[0], packet_length ); #endif } else { /* error ... */ /* TODO ? */ is_error = 1; } while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) udelay(1); /* Wait until not busy */ /* error or good, tell the card to get rid of this packet */ SMC_outw( MC_RELEASE, MMU_CMD_REG ); while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY ) udelay(1); /* Wait until not busy */ /* restore saved registers */ #ifndef CONFIG_XAENIAX SMC_outb( saved_pnr, PN_REG ); #else /* On Xaeniax board, we can't use SMC_outb here because that way * the Allocate MMU command will end up written to the command register * as well, which will lead to a problem. */ SMC_outl( saved_pnr << 16, 0); #endif SMC_outw( saved_ptr, PTR_REG ); if (!is_error) { /* Pass the packet up to the protocol layers. */ NetReceive(NetRxPackets[0], packet_length); return packet_length; } else { return 0; } } /*---------------------------------------------------- . smc_close . . this makes the board clean up everything that it can . and not talk to the outside world. Caused by . an 'ifconfig ethX down' . -----------------------------------------------------*/ static int smc_close() { PRINTK2("%s: smc_close\n", SMC_DEV_NAME); /* clear everything */ smc_shutdown(); return 0; } #if 0 /*------------------------------------------------------------ . Modify a bit in the LAN91C111 register set .-------------------------------------------------------------*/ static word smc_modify_regbit(int bank, int ioaddr, int reg, unsigned int bit, int val) { word regval; SMC_SELECT_BANK( bank ); regval = SMC_inw( reg ); if (val) regval |= bit; else regval &= ~bit; SMC_outw( regval, 0 ); return(regval); } /*------------------------------------------------------------ . Retrieve a bit in the LAN91C111 register set .-------------------------------------------------------------*/ static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit) { SMC_SELECT_BANK( bank ); if ( SMC_inw( reg ) & bit) return(1); else return(0); } /*------------------------------------------------------------ . Modify a LAN91C111 register (word access only) .-------------------------------------------------------------*/ static void smc_modify_reg(int bank, int ioaddr, int reg, word val) { SMC_SELECT_BANK( bank ); SMC_outw( val, reg ); } /*------------------------------------------------------------ . Retrieve a LAN91C111 register (word access only) .-------------------------------------------------------------*/ static int smc_get_reg(int bank, int ioaddr, int reg) { SMC_SELECT_BANK( bank ); return(SMC_inw( reg )); } #endif /* 0 */ /*---PHY CONTROL AND CONFIGURATION----------------------------------------- */ #if (SMC_DEBUG > 2 ) /*------------------------------------------------------------ . Debugging function for viewing MII Management serial bitstream .-------------------------------------------------------------*/ static void smc_dump_mii_stream (byte * bits, int size) { int i; printf ("BIT#:"); for (i = 0; i < size; ++i) { printf ("%d", i % 10); } printf ("\nMDOE:"); for (i = 0; i < size; ++i) { if (bits[i] & MII_MDOE) printf ("1"); else printf ("0"); } printf ("\nMDO :"); for (i = 0; i < size; ++i) { if (bits[i] & MII_MDO) printf ("1"); else printf ("0"); } printf ("\nMDI :"); for (i = 0; i < size; ++i) { if (bits[i] & MII_MDI) printf ("1"); else printf ("0"); } printf ("\n"); } #endif /*------------------------------------------------------------ . Reads a register from the MII Management serial interface .-------------------------------------------------------------*/ #ifndef CONFIG_SMC91111_EXT_PHY static word smc_read_phy_register (byte phyreg) { int oldBank; int i; byte mask; word mii_reg; byte bits[64]; int clk_idx = 0; int input_idx; word phydata; byte phyaddr = SMC_PHY_ADDR; /* 32 consecutive ones on MDO to establish sync */ for (i = 0; i < 32; ++i) bits[clk_idx++] = MII_MDOE | MII_MDO; /* Start code <01> */ bits[clk_idx++] = MII_MDOE; bits[clk_idx++] = MII_MDOE | MII_MDO; /* Read command <10> */ bits[clk_idx++] = MII_MDOE | MII_MDO; bits[clk_idx++] = MII_MDOE; /* Output the PHY address, msb first */ mask = (byte) 0x10; for (i = 0; i < 5; ++i) { if (phyaddr & mask) bits[clk_idx++] = MII_MDOE | MII_MDO; else bits[clk_idx++] = MII_MDOE; /* Shift to next lowest bit */ mask >>= 1; } /* Output the phy register number, msb first */ mask = (byte) 0x10; for (i = 0; i < 5; ++i) { if (phyreg & mask) bits[clk_idx++] = MII_MDOE | MII_MDO; else bits[clk_idx++] = MII_MDOE; /* Shift to next lowest bit */ mask >>= 1; } /* Tristate and turnaround (2 bit times) */ bits[clk_idx++] = 0; /*bits[clk_idx++] = 0; */ /* Input starts at this bit time */ input_idx = clk_idx; /* Will input 16 bits */ for (i = 0; i < 16; ++i) bits[clk_idx++] = 0; /* Final clock bit */ bits[clk_idx++] = 0; /* Save the current bank */ oldBank = SMC_inw (BANK_SELECT); /* Select bank 3 */ SMC_SELECT_BANK (3); /* Get the current MII register value */ mii_reg = SMC_inw (MII_REG); /* Turn off all MII Interface bits */ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO); /* Clock all 64 cycles */ for (i = 0; i < sizeof bits; ++i) { /* Clock Low - output data */ SMC_outw (mii_reg | bits[i], MII_REG); udelay (SMC_PHY_CLOCK_DELAY); /* Clock Hi - input data */ SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG); udelay (SMC_PHY_CLOCK_DELAY); bits[i] |= SMC_inw (MII_REG) & MII_MDI; } /* Return to idle state */ /* Set clock to low, data to low, and output tristated */ SMC_outw (mii_reg, MII_REG); udelay (SMC_PHY_CLOCK_DELAY); /* Restore original bank select */ SMC_SELECT_BANK (oldBank); /* Recover input data */ phydata = 0; for (i = 0; i < 16; ++i) { phydata <<= 1; if (bits[input_idx++] & MII_MDI) phydata |= 0x0001; } #if (SMC_DEBUG > 2 ) printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n", phyaddr, phyreg, phydata); smc_dump_mii_stream (bits, sizeof bits); #endif return (phydata); } /*------------------------------------------------------------ . Writes a register to the MII Management serial interface .-------------------------------------------------------------*/ static void smc_write_phy_register (byte phyreg, word phydata) { int oldBank; int i; word mask; word mii_reg; byte bits[65]; int clk_idx = 0; byte phyaddr = SMC_PHY_ADDR; /* 32 consecutive ones on MDO to establish sync */ for (i = 0; i < 32; ++i) bits[clk_idx++] = MII_MDOE | MII_MDO; /* Start code <01> */ bits[clk_idx++] = MII_MDOE; bits[clk_idx++] = MII_MDOE | MII_MDO; /* Write command <01> */ bits[clk_idx++] = MII_MDOE; bits[clk_idx++] = MII_MDOE | MII_MDO; /* Output the PHY address, msb first */ mask = (byte) 0x10; for (i = 0; i < 5; ++i) { if (phyaddr & mask) bits[clk_idx++] = MII_MDOE | MII_MDO; else bits[clk_idx++] = MII_MDOE; /* Shift to next lowest bit */ mask >>= 1; } /* Output the phy register number, msb first */ mask = (byte) 0x10; for (i = 0; i < 5; ++i) { if (phyreg & mask) bits[clk_idx++] = MII_MDOE | MII_MDO; else bits[clk_idx++] = MII_MDOE; /* Shift to next lowest bit */ mask >>= 1; } /* Tristate and turnaround (2 bit times) */ bits[clk_idx++] = 0; bits[clk_idx++] = 0; /* Write out 16 bits of data, msb first */ mask = 0x8000; for (i = 0; i < 16; ++i) { if (phydata & mask) bits[clk_idx++] = MII_MDOE | MII_MDO; else bits[clk_idx++] = MII_MDOE; /* Shift to next lowest bit */ mask >>= 1; } /* Final clock bit (tristate) */ bits[clk_idx++] = 0; /* Save the current bank */ oldBank = SMC_inw (BANK_SELECT); /* Select bank 3 */ SMC_SELECT_BANK (3); /* Get the current MII register value */ mii_reg = SMC_inw (MII_REG); /* Turn off all MII Interface bits */ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO); /* Clock all cycles */ for (i = 0; i < sizeof bits; ++i) { /* Clock Low - output data */ SMC_outw (mii_reg | bits[i], MII_REG); udelay (SMC_PHY_CLOCK_DELAY); /* Clock Hi - input data */ SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG); udelay (SMC_PHY_CLOCK_DELAY); bits[i] |= SMC_inw (MII_REG) & MII_MDI; } /* Return to idle state */ /* Set clock to low, data to low, and output tristated */ SMC_outw (mii_reg, MII_REG); udelay (SMC_PHY_CLOCK_DELAY); /* Restore original bank select */ SMC_SELECT_BANK (oldBank); #if (SMC_DEBUG > 2 ) printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n", phyaddr, phyreg, phydata); smc_dump_mii_stream (bits, sizeof bits); #endif } #endif /* !CONFIG_SMC91111_EXT_PHY */ /*------------------------------------------------------------ . Waits the specified number of milliseconds - kernel friendly .-------------------------------------------------------------*/ #ifndef CONFIG_SMC91111_EXT_PHY static void smc_wait_ms(unsigned int ms) { udelay(ms*1000); } #endif /* !CONFIG_SMC91111_EXT_PHY */ /*------------------------------------------------------------ . Configures the specified PHY using Autonegotiation. Calls . smc_phy_fixed() if the user has requested a certain config. .-------------------------------------------------------------*/ #ifndef CONFIG_SMC91111_EXT_PHY static void smc_phy_configure () { int timeout; byte phyaddr; word my_phy_caps; /* My PHY capabilities */ word my_ad_caps; /* My Advertised capabilities */ word status = 0; /*;my status = 0 */ int failed = 0; PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME); /* Get the detected phy address */ phyaddr = SMC_PHY_ADDR; /* Reset the PHY, setting all other bits to zero */ smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST); /* Wait for the reset to complete, or time out */ timeout = 6; /* Wait up to 3 seconds */ while (timeout--) { if (!(smc_read_phy_register (PHY_CNTL_REG) & PHY_CNTL_RST)) { /* reset complete */ break; } smc_wait_ms (500); /* wait 500 millisecs */ } if (timeout < 1) { printf ("%s:PHY reset timed out\n", SMC_DEV_NAME); goto smc_phy_configure_exit; } /* Read PHY Register 18, Status Output */ /* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */ /* Enable PHY Interrupts (for register 18) */ /* Interrupts listed here are disabled */ smc_write_phy_register (PHY_MASK_REG, 0xffff); /* Configure the Receive/Phy Control register */ SMC_SELECT_BANK (0); SMC_outw (RPC_DEFAULT, RPC_REG); /* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */ my_phy_caps = smc_read_phy_register (PHY_STAT_REG); my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */ if (my_phy_caps & PHY_STAT_CAP_T4) my_ad_caps |= PHY_AD_T4; if (my_phy_caps & PHY_STAT_CAP_TXF) my_ad_caps |= PHY_AD_TX_FDX; if (my_phy_caps & PHY_STAT_CAP_TXH) my_ad_caps |= PHY_AD_TX_HDX; if (my_phy_caps & PHY_STAT_CAP_TF) my_ad_caps |= PHY_AD_10_FDX; if (my_phy_caps & PHY_STAT_CAP_TH) my_ad_caps |= PHY_AD_10_HDX; /* Update our Auto-Neg Advertisement Register */ smc_write_phy_register (PHY_AD_REG, my_ad_caps); /* Read the register back. Without this, it appears that when */ /* auto-negotiation is restarted, sometimes it isn't ready and */ /* the link does not come up. */ smc_read_phy_register(PHY_AD_REG); PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps); PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps); /* Restart auto-negotiation process in order to advertise my caps */ smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST); /* Wait for the auto-negotiation to complete. This may take from */ /* 2 to 3 seconds. */ /* Wait for the reset to complete, or time out */ timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2; while (timeout--) { status = smc_read_phy_register (PHY_STAT_REG); if (status & PHY_STAT_ANEG_ACK) { /* auto-negotiate complete */ break; } smc_wait_ms (500); /* wait 500 millisecs */ /* Restart auto-negotiation if remote fault */ if (status & PHY_STAT_REM_FLT) { printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME); /* Restart auto-negotiation */ printf ("%s: PHY restarting auto-negotiation\n", SMC_DEV_NAME); smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST | PHY_CNTL_SPEED | PHY_CNTL_DPLX); } } if (timeout < 1) { printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME); failed = 1; } /* Fail if we detected an auto-negotiate remote fault */ if (status & PHY_STAT_REM_FLT) { printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME); failed = 1; } /* Re-Configure the Receive/Phy Control register */ SMC_outw (RPC_DEFAULT, RPC_REG); smc_phy_configure_exit: ; } #endif /* !CONFIG_SMC91111_EXT_PHY */ #if SMC_DEBUG > 2 static void print_packet( byte * buf, int length ) { int i; int remainder; int lines; printf("Packet of length %d \n", length ); #if SMC_DEBUG > 3 lines = length / 16; remainder = length % 16; for ( i = 0; i < lines ; i ++ ) { int cur; for ( cur = 0; cur < 8; cur ++ ) { byte a, b; a = *(buf ++ ); b = *(buf ++ ); printf("%02x%02x ", a, b ); } printf("\n"); } for ( i = 0; i < remainder/2 ; i++ ) { byte a, b; a = *(buf ++ ); b = *(buf ++ ); printf("%02x%02x ", a, b ); } printf("\n"); #endif } #endif int eth_init(bd_t *bd) { return (smc_open(bd)); } void eth_halt() { smc_close(); } int eth_rx() { return smc_rcv(); } int eth_send(volatile void *packet, int length) { return smc_send_packet(packet, length); } int smc_get_ethaddr (bd_t * bd) { int env_size, rom_valid, env_present = 0, reg; char *s = NULL, *e, *v_mac, es[] = "11:22:33:44:55:66"; uchar s_env_mac[64], v_env_mac[6], v_rom_mac[6]; env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac)); if ((env_size > 0) && (env_size < sizeof (es))) { /* exit if env is bad */ printf ("\n*** ERROR: ethaddr is not set properly!!\n"); return (-1); } if (env_size > 0) { env_present = 1; s = s_env_mac; } for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */ v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */ if (!env_present) { /* if NO env */ if (rom_valid) { /* but ROM is valid */ v_mac = v_rom_mac; sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X", v_mac[0], v_mac[1], v_mac[2], v_mac[3], v_mac[4], v_mac[5]); setenv ("ethaddr", s_env_mac); } else { /* no env, bad ROM */ printf ("\n*** ERROR: ethaddr is NOT set !!\n"); return (-1); } } else { /* good env, don't care ROM */ v_mac = v_env_mac; /* always use a good env over a ROM */ } if (env_present && rom_valid) { /* if both env and ROM are good */ if (memcmp (v_env_mac, v_rom_mac, 6) != 0) { printf ("\nWarning: MAC addresses don't match:\n"); printf ("\tHW MAC address: " "%02X:%02X:%02X:%02X:%02X:%02X\n", v_rom_mac[0], v_rom_mac[1], v_rom_mac[2], v_rom_mac[3], v_rom_mac[4], v_rom_mac[5] ); printf ("\t\"ethaddr\" value: " "%02X:%02X:%02X:%02X:%02X:%02X\n", v_env_mac[0], v_env_mac[1], v_env_mac[2], v_env_mac[3], v_env_mac[4], v_env_mac[5]) ; debug ("### Set MAC addr from environment\n"); } } memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */ smc_set_mac_addr (v_mac); /* use old function to update smc default */ PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1], v_mac[2], v_mac[3], v_mac[4], v_mac[5]); return (0); } int get_rom_mac (char *v_rom_mac) { #ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */ char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 }; memcpy (v_rom_mac, hw_mac_addr, 6); return (1); #else int i; int valid_mac = 0; SMC_SELECT_BANK (1); for (i=0; i<6; i++) { v_rom_mac[i] = SMC_inb ((ADDR0_REG + i)); valid_mac |= v_rom_mac[i]; } return (valid_mac ? 1 : 0); #endif } #endif /* CONFIG_DRIVER_SMC91111 */