#ifndef __S3C4510B_ETH_H #define __S3C4510B_ETH_H /* * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) * Curt Brune <curt@cucy.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * MODULE: $Id:$ * Description: Ethernet interface * Runtime Env: ARM7TDMI * Change History: * 03-02-04 Create (Curt Brune) curt@cucy.com * */ #define __packed __attribute__ ((packed)) #define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */ #define ETH_MaxTxFrames (16) /* Max number of Tx Frames */ /* Buffered DMA Receiver Control Register */ #define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */ /* = Burst Data Size 16 */ #define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */ /* case of not OWNER the current Frame */ #define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */ #define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */ #define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */ #define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */ #define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */ #define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */ #define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */ #define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */ #define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */ #define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */ #define ETH_BRxEn 0x04000 /* BDMA Rx Enable */ #define ETH_BRxRS 0x08000 /* BDMA Rx Reset */ #define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */ #define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */ /* Buffered DMA Trasmit Control Register(BDMATXCON) */ #define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */ #define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */ /* of not Owner the current frame */ #define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */ /* packet Enable */ #define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */ #define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */ /* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */ #define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */ #define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */ #define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */ #define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */ #define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */ #define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */ #define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */ #define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */ #define ETH_BTxEn 0x04000 /* BDMA Tx Enable */ #define ETH_BTxRS 0x08000 /* BDMA Tx Reset */ /* BDMA Status Register */ #define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */ #define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */ #define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */ #define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */ #define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */ #define ETH_S_BRxSEarly 0x00020 /* Early Notify */ #define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */ #define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */ #define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */ #define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */ #define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */ /* MAC Control Register */ #define ETH_HaltReg 0x0001 /* stop transmission and reception */ /* after completion of any current packets */ #define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */ #define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */ /* and FIFOs */ #define ETH_FullDup 0x0008 /* allow transmission to begin while reception */ /* is occurring */ #define ETH_MACLoop 0x0010 /* MAC loopback */ #define ETH_ConnM00 0x0000 /* Automatic-default */ #define ETH_ConnM01 0x0020 /* Force 10Mbits endec */ #define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */ #define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */ #define ETH_Loop10 0x0080 /* Loop 10Mbps */ #define ETH_MissRoll 0x0400 /* Missed error counter rolled over */ #define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */ #define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */ /* over */ #define ETH_Link10 0x8000 /* Link status 10Mbps */ /* CAM control register(CAMCON) */ #define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */ /* address */ #define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */ /* station address */ #define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */ /* address */ #define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */ /* reject others */ /* 1: reject packets CAM recognizes, */ /* accept others */ #define ETH_CompEn 0x0010 /* Compare Enable mode */ /* Transmit Control Register(MACTXCON) */ #define ETH_TxEn 0x0001 /* transmit Enable */ #define ETH_TxHalt 0x0002 /* Transmit Halt Request */ #define ETH_NoPad 0x0004 /* suppress Padding */ #define ETH_NoCRC 0x0008 /* Suppress CRC */ #define ETH_FBack 0x0010 /* Fast Back-off */ #define ETH_NoDef 0x0020 /* Disable the defer counter */ #define ETH_SdPause 0x0040 /* Send Pause */ #define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */ #define ETH_EnUnder 0x0100 /* Enable Underrun */ #define ETH_EnDefer 0x0200 /* Enable Deferral */ #define ETH_EnNCarr 0x0400 /* Enable No Carrier */ #define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */ /* in the same packet */ #define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */ /* 512 bit times(64 bytes times) */ #define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */ /* has a parity error */ #define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */ /* discards one packet */ /* Transmit Status Register(MACTXSTAT) */ #define ETH_ExColl 0x0010 /* Excessive collision */ #define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */ #define ETH_Paused 0x0040 /* packet waited because of pause during */ /* transmission */ #define ETH_IntTx 0x0080 /* set if transmission of packet causes an */ /* interrupt condiftion */ #define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */ /* transmission */ #define ETH_Defer 0x0200 /* MAC defers for MAC deferral */ #define ETH_NCarr 0x0400 /* No carrier sense detected during the */ /* transmission of a packet */ #define ETH_SQE 0x0800 /* Signal Quality Error */ #define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */ #define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */ #define ETH_Comp 0x4000 /* MAC transmit or discards one packet */ #define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */ /* TxEn or Halt immedite */ /* Receive Control Register (MACRXCON) */ #define ETH_RxEn 0x0001 #define ETH_RxHalt 0x0002 #define ETH_LongEn 0x0004 #define ETH_ShortEn 0x0008 #define ETH_StripCRC 0x0010 #define ETH_PassCtl 0x0020 #define ETH_IgnoreCRC 0x0040 #define ETH_EnAlign 0x0100 #define ETH_EnCRCErr 0x0200 #define ETH_EnOver 0x0400 #define ETH_EnLongErr 0x0800 #define ETH_EnRxPar 0x2000 #define ETH_EnGood 0x4000 /* Receive Status Register(MACRXSTAT) */ #define ETH_MCtlRecd 0x0020 #define ETH_MIntRx 0x0040 #define ETH_MRx10Stat 0x0080 #define ETH_MAllignErr 0x0100 #define ETH_MCRCErr 0x0200 #define ETH_MOverflow 0x0400 #define ETH_MLongErr 0x0800 #define ETH_MRxPar 0x2000 #define ETH_MRxGood 0x4000 #define ETH_MRxHalted 0x8000 /* type of ethernet packets */ #define ETH_TYPE_ARP (0x0806) #define ETH_TYPE_IP (0x0800) #define ETH_HDR_SIZE (14) /* bit field for frame data pointer word */ typedef struct __BF_FrameDataPtr { u32 dataPtr:31; u32 owner: 1; } BF_FrameDataPtr; typedef union _FrameDataPtr { u32 ui; BF_FrameDataPtr bf; } FrameDataPtr; typedef struct __BF_TX_Options { u32 no_padding: 1; u32 no_crc: 1; u32 macTxIrqEnbl: 1; u32 littleEndian: 1; u32 frameDataDir: 1; u32 widgetAlign: 2; u32 reserved:25; } BF_TX_Options; typedef union _TX_Options { u32 ui; BF_TX_Options bf; } TX_Options; typedef struct __BF_RX_Status { u32 len:16; /* frame length */ u32 reserved1: 3; u32 overMax: 1; u32 reserved2: 1; u32 ctrlRcv: 1; u32 intRx: 1; u32 rx10stat: 1; u32 alignErr: 1; u32 crcErr: 1; u32 overFlow: 1; u32 longErr: 1; u32 reserved3: 1; u32 parityErr: 1; u32 good: 1; u32 halted: 1; } BF_RX_Status; typedef union _RX_Status { u32 ui; BF_RX_Status bf; } RX_Status; typedef struct __BF_TX_Status { u32 len:16; /* frame length */ u32 txCollCnt: 4; u32 exColl: 1; u32 txDefer: 1; u32 paused: 1; u32 intTx: 1; u32 underRun: 1; u32 defer: 1; u32 noCarrier: 1; u32 SQErr: 1; u32 lateColl: 1; u32 parityErr: 1; u32 complete: 1; u32 halted: 1; } BF_TX_Status; typedef union _TX_Status { u32 ui; BF_TX_Status bf; } TX_Status; /* TX descriptor structure */ typedef struct __TX_FrameDescriptor { volatile FrameDataPtr m_frameDataPtr; TX_Options m_opt; volatile TX_Status m_status; struct __TX_FrameDescriptor *m_nextFD; } TX_FrameDescriptor; /* RX descriptor structure */ typedef struct __RX_FrameDescriptor { volatile FrameDataPtr m_frameDataPtr; u32 m_reserved; volatile RX_Status m_status; struct __RX_FrameDescriptor *m_nextFD; } RX_FrameDescriptor; /* MAC Frame Structure */ typedef struct __MACFrame { u8 m_dstAddr[6] __packed; u8 m_srcAddr[6] __packed; u16 m_lengthOrType __packed; u8 m_payload[1506] __packed; } MACFrame; /* Ethernet Control block */ typedef struct __ETH { TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */ TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */ RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */ RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */ u8 *m_mac; /* pointer to our MAC address */ } ETH; #endif