/* * Copyright (C) 2005,2010-2011 Freescale Semiconductor, Inc. * * Author: Shlomi Gridish * * Description: UCC GETH Driver -- PHY handling * Driver for UEC on QE * Based on 8260_io/fcc_enet.c * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include "common.h" #include "net.h" #include "malloc.h" #include "asm/errno.h" #include "asm/immap_qe.h" #include "asm/io.h" #include "qe.h" #include "uccf.h" #include "uec.h" #include "uec_phy.h" #include "miiphy.h" #include <phy.h> #define ugphy_printk(format, arg...) \ printf(format "\n", ## arg) #define ugphy_dbg(format, arg...) \ ugphy_printk(format , ## arg) #define ugphy_err(format, arg...) \ ugphy_printk(format , ## arg) #define ugphy_info(format, arg...) \ ugphy_printk(format , ## arg) #define ugphy_warn(format, arg...) \ ugphy_printk(format , ## arg) #ifdef UEC_VERBOSE_DEBUG #define ugphy_vdbg ugphy_dbg #else #define ugphy_vdbg(ugeth, fmt, args...) do { } while (0) #endif /* UEC_VERBOSE_DEBUG */ /*--------------------------------------------------------------------+ * Fixed PHY (PHY-less) support for Ethernet Ports. * * Copied from arch/powerpc/cpu/ppc4xx/4xx_enet.c *--------------------------------------------------------------------*/ /* * Some boards do not have a PHY for each ethernet port. These ports are known * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address) * When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned * and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network * speed and duplex should be for the port. * * Example board header configuration file: * #define CONFIG_FIXED_PHY 0xFFFFFFFF * #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address) * * #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR * #define CONFIG_SYS_UEC2_PHY_ADDR 0x02 * #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR * #define CONFIG_SYS_UEC4_PHY_ADDR 0x04 * * #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \ * {name, speed, duplex}, * * #define CONFIG_SYS_FIXED_PHY_PORTS \ * CONFIG_SYS_FIXED_PHY_PORT("UEC0",SPEED_100,DUPLEX_FULL) \ * CONFIG_SYS_FIXED_PHY_PORT("UEC2",SPEED_100,DUPLEX_HALF) */ #ifndef CONFIG_FIXED_PHY #define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */ #endif #ifndef CONFIG_SYS_FIXED_PHY_PORTS #define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */ #endif struct fixed_phy_port { char name[16]; /* ethernet port name */ unsigned int speed; /* specified speed 10,100 or 1000 */ unsigned int duplex; /* specified duplex FULL or HALF */ }; static const struct fixed_phy_port fixed_phy_port[] = { CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */ }; /*--------------------------------------------------------------------+ * BitBang MII support for ethernet ports * * Based from MPC8560ADS implementation *--------------------------------------------------------------------*/ /* * Example board header file to define bitbang ethernet ports: * * #define CONFIG_SYS_BITBANG_PHY_PORT(name) name, * #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("UEC0") */ #ifndef CONFIG_SYS_BITBANG_PHY_PORTS #define CONFIG_SYS_BITBANG_PHY_PORTS /* default is an empty array */ #endif #if defined(CONFIG_BITBANGMII) static const char *bitbang_phy_port[] = { CONFIG_SYS_BITBANG_PHY_PORTS /* defined in board configuration file */ }; #endif /* CONFIG_BITBANGMII */ static void config_genmii_advert (struct uec_mii_info *mii_info); static void genmii_setup_forced (struct uec_mii_info *mii_info); static void genmii_restart_aneg (struct uec_mii_info *mii_info); static int gbit_config_aneg (struct uec_mii_info *mii_info); static int genmii_config_aneg (struct uec_mii_info *mii_info); static int genmii_update_link (struct uec_mii_info *mii_info); static int genmii_read_status (struct uec_mii_info *mii_info); u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum); void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value) { uec_private_t *ugeth = (uec_private_t *) dev->priv; uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; #if defined(CONFIG_BITBANGMII) u32 i = 0; for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) { if (strncmp(dev->name, bitbang_phy_port[i], sizeof(dev->name)) == 0) { (void)bb_miiphy_write(NULL, mii_id, regnum, value); return; } } #endif /* CONFIG_BITBANGMII */ ug_regs = ugeth->uec_mii_regs; /* Stop the MII management read cycle */ out_be32 (&ug_regs->miimcom, 0); /* Setting up the MII Mangement Address Register */ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; out_be32 (&ug_regs->miimadd, tmp_reg); /* Setting up the MII Mangement Control Register with the value */ out_be32 (&ug_regs->miimcon, (u32) value); sync(); /* Wait till MII management write is complete */ while ((in_be32 (&ug_regs->miimind)) & MIIMIND_BUSY); } /* Reads from register regnum in the PHY for device dev, */ /* returning the value. Clears miimcom first. All PHY */ /* configuration has to be done through the TSEC1 MIIM regs */ int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum) { uec_private_t *ugeth = (uec_private_t *) dev->priv; uec_mii_t *ug_regs; enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum; u32 tmp_reg; u16 value; #if defined(CONFIG_BITBANGMII) u32 i = 0; for (i = 0; i < ARRAY_SIZE(bitbang_phy_port); i++) { if (strncmp(dev->name, bitbang_phy_port[i], sizeof(dev->name)) == 0) { (void)bb_miiphy_read(NULL, mii_id, regnum, &value); return (value); } } #endif /* CONFIG_BITBANGMII */ ug_regs = ugeth->uec_mii_regs; /* Setting up the MII Mangement Address Register */ tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; out_be32 (&ug_regs->miimadd, tmp_reg); /* clear MII management command cycle */ out_be32 (&ug_regs->miimcom, 0); sync(); /* Perform an MII management read cycle */ out_be32 (&ug_regs->miimcom, MIIMCOM_READ_CYCLE); /* Wait till MII management write is complete */ while ((in_be32 (&ug_regs->miimind)) & (MIIMIND_NOT_VALID | MIIMIND_BUSY)); /* Read MII management status */ value = (u16) in_be32 (&ug_regs->miimstat); if (value == 0xffff) ugphy_vdbg ("read wrong value : mii_id %d,mii_reg %d, base %08x", mii_id, mii_reg, (u32) & (ug_regs->miimcfg)); return (value); } void mii_clear_phy_interrupt (struct uec_mii_info *mii_info) { if (mii_info->phyinfo->ack_interrupt) mii_info->phyinfo->ack_interrupt (mii_info); } void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, u32 interrupts) { mii_info->interrupts = interrupts; if (mii_info->phyinfo->config_intr) mii_info->phyinfo->config_intr (mii_info); } /* Writes MII_ADVERTISE with the appropriate values, after * sanitizing advertise to make sure only supported features * are advertised */ static void config_genmii_advert (struct uec_mii_info *mii_info) { u32 advertise; u16 adv; /* Only allow advertising what this PHY supports */ mii_info->advertising &= mii_info->phyinfo->features; advertise = mii_info->advertising; /* Setup standard advertisement */ adv = uec_phy_read(mii_info, MII_ADVERTISE); adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; if (advertise & ADVERTISED_10baseT_Full) adv |= ADVERTISE_10FULL; if (advertise & ADVERTISED_100baseT_Half) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; uec_phy_write(mii_info, MII_ADVERTISE, adv); } static void genmii_setup_forced (struct uec_mii_info *mii_info) { u16 ctrl; u32 features = mii_info->phyinfo->features; ctrl = uec_phy_read(mii_info, MII_BMCR); ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); ctrl |= BMCR_RESET; switch (mii_info->speed) { case SPEED_1000: if (features & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { ctrl |= BMCR_SPEED1000; break; } mii_info->speed = SPEED_100; case SPEED_100: if (features & (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full)) { ctrl |= BMCR_SPEED100; break; } mii_info->speed = SPEED_10; case SPEED_10: if (features & (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full)) break; default: /* Unsupported speed! */ ugphy_err ("%s: Bad speed!", mii_info->dev->name); break; } uec_phy_write(mii_info, MII_BMCR, ctrl); } /* Enable and Restart Autonegotiation */ static void genmii_restart_aneg (struct uec_mii_info *mii_info) { u16 ctl; ctl = uec_phy_read(mii_info, MII_BMCR); ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); uec_phy_write(mii_info, MII_BMCR, ctl); } static int gbit_config_aneg (struct uec_mii_info *mii_info) { u16 adv; u32 advertise; if (mii_info->autoneg) { /* Configure the ADVERTISE register */ config_genmii_advert (mii_info); advertise = mii_info->advertising; adv = uec_phy_read(mii_info, MII_CTRL1000); adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); if (advertise & SUPPORTED_1000baseT_Half) adv |= ADVERTISE_1000HALF; if (advertise & SUPPORTED_1000baseT_Full) adv |= ADVERTISE_1000FULL; uec_phy_write(mii_info, MII_CTRL1000, adv); /* Start/Restart aneg */ genmii_restart_aneg (mii_info); } else genmii_setup_forced (mii_info); return 0; } static int marvell_config_aneg (struct uec_mii_info *mii_info) { /* The Marvell PHY has an errata which requires * that certain registers get written in order * to restart autonegotiation */ uec_phy_write(mii_info, MII_BMCR, BMCR_RESET); uec_phy_write(mii_info, 0x1d, 0x1f); uec_phy_write(mii_info, 0x1e, 0x200c); uec_phy_write(mii_info, 0x1d, 0x5); uec_phy_write(mii_info, 0x1e, 0); uec_phy_write(mii_info, 0x1e, 0x100); gbit_config_aneg (mii_info); return 0; } static int genmii_config_aneg (struct uec_mii_info *mii_info) { if (mii_info->autoneg) { /* Speed up the common case, if link is already up, speed and duplex match, skip auto neg as it already matches */ if (!genmii_read_status(mii_info) && mii_info->link) if (mii_info->duplex == DUPLEX_FULL && mii_info->speed == SPEED_100) if (mii_info->advertising & ADVERTISED_100baseT_Full) return 0; config_genmii_advert (mii_info); genmii_restart_aneg (mii_info); } else genmii_setup_forced (mii_info); return 0; } static int genmii_update_link (struct uec_mii_info *mii_info) { u16 status; /* Status is read once to clear old link state */ uec_phy_read(mii_info, MII_BMSR); /* * Wait if the link is up, and autonegotiation is in progress * (ie - we're capable and it's not done) */ status = uec_phy_read(mii_info, MII_BMSR); if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE) && !(status & BMSR_ANEGCOMPLETE)) { int i = 0; while (!(status & BMSR_ANEGCOMPLETE)) { /* * Timeout reached ? */ if (i > UGETH_AN_TIMEOUT) { mii_info->link = 0; return 0; } i++; udelay(1000); /* 1 ms */ status = uec_phy_read(mii_info, MII_BMSR); } mii_info->link = 1; } else { if (status & BMSR_LSTATUS) mii_info->link = 1; else mii_info->link = 0; } return 0; } static int genmii_read_status (struct uec_mii_info *mii_info) { u16 status; int err; /* Update the link, but return if there * was an error */ err = genmii_update_link (mii_info); if (err) return err; if (mii_info->autoneg) { status = uec_phy_read(mii_info, MII_STAT1000); if (status & (LPA_1000FULL | LPA_1000HALF)) { mii_info->speed = SPEED_1000; if (status & LPA_1000FULL) mii_info->duplex = DUPLEX_FULL; else mii_info->duplex = DUPLEX_HALF; } else { status = uec_phy_read(mii_info, MII_LPA); if (status & (LPA_10FULL | LPA_100FULL)) mii_info->duplex = DUPLEX_FULL; else mii_info->duplex = DUPLEX_HALF; if (status & (LPA_100FULL | LPA_100HALF)) mii_info->speed = SPEED_100; else mii_info->speed = SPEED_10; } mii_info->pause = 0; } /* On non-aneg, we assume what we put in BMCR is the speed, * though magic-aneg shouldn't prevent this case from occurring */ return 0; } static int bcm_init(struct uec_mii_info *mii_info) { struct eth_device *edev = mii_info->dev; uec_private_t *uec = edev->priv; gbit_config_aneg(mii_info); if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_RGMII_RXID) && (uec->uec_info->speed == SPEED_1000)) { u16 val; int cnt = 50; /* Wait for aneg to complete. */ do val = uec_phy_read(mii_info, MII_BMSR); while (--cnt && !(val & BMSR_ANEGCOMPLETE)); /* Set RDX clk delay. */ uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12)); val = uec_phy_read(mii_info, 0x18); /* Set RDX-RXC skew. */ val |= (1 << 8); val |= (7 | (7 << 12)); /* Write bits 14:0. */ val |= (1 << 15); uec_phy_write(mii_info, 0x18, val); } return 0; } static int uec_marvell_init(struct uec_mii_info *mii_info) { struct eth_device *edev = mii_info->dev; uec_private_t *uec = edev->priv; phy_interface_t iface = uec->uec_info->enet_interface_type; int speed = uec->uec_info->speed; if ((speed == SPEED_1000) && (iface == PHY_INTERFACE_MODE_RGMII_ID || iface == PHY_INTERFACE_MODE_RGMII_RXID || iface == PHY_INTERFACE_MODE_RGMII_TXID)) { int temp; temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR); if (iface == PHY_INTERFACE_MODE_RGMII_ID) { temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY; } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) { temp &= ~MII_M1111_TX_DELAY; temp |= MII_M1111_RX_DELAY; } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) { temp &= ~MII_M1111_RX_DELAY; temp |= MII_M1111_TX_DELAY; } uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR); temp &= ~MII_M1111_HWCFG_MODE_MASK; temp |= MII_M1111_HWCFG_MODE_RGMII; uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); uec_phy_write(mii_info, MII_BMCR, BMCR_RESET); } return 0; } static int marvell_read_status (struct uec_mii_info *mii_info) { u16 status; int err; /* Update the link, but return if there * was an error */ err = genmii_update_link (mii_info); if (err) return err; /* If the link is up, read the speed and duplex */ /* If we aren't autonegotiating, assume speeds * are as set */ if (mii_info->autoneg && mii_info->link) { int speed; status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); /* Get the duplexity */ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) mii_info->duplex = DUPLEX_FULL; else mii_info->duplex = DUPLEX_HALF; /* Get the speed */ speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; switch (speed) { case MII_M1011_PHY_SPEC_STATUS_1000: mii_info->speed = SPEED_1000; break; case MII_M1011_PHY_SPEC_STATUS_100: mii_info->speed = SPEED_100; break; default: mii_info->speed = SPEED_10; break; } mii_info->pause = 0; } return 0; } static int marvell_ack_interrupt (struct uec_mii_info *mii_info) { /* Clear the interrupts by reading the reg */ uec_phy_read(mii_info, MII_M1011_IEVENT); return 0; } static int marvell_config_intr (struct uec_mii_info *mii_info) { if (mii_info->interrupts == MII_INTERRUPT_ENABLED) uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); else uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); return 0; } static int dm9161_init (struct uec_mii_info *mii_info) { /* Reset the PHY */ uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) | BMCR_RESET); /* PHY and MAC connect */ uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE); uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); config_genmii_advert (mii_info); /* Start/restart aneg */ genmii_config_aneg (mii_info); return 0; } static int dm9161_config_aneg (struct uec_mii_info *mii_info) { return 0; } static int dm9161_read_status (struct uec_mii_info *mii_info) { u16 status; int err; /* Update the link, but return if there was an error */ err = genmii_update_link (mii_info); if (err) return err; /* If the link is up, read the speed and duplex If we aren't autonegotiating assume speeds are as set */ if (mii_info->autoneg && mii_info->link) { status = uec_phy_read(mii_info, MII_DM9161_SCSR); if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) mii_info->speed = SPEED_100; else mii_info->speed = SPEED_10; if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) mii_info->duplex = DUPLEX_FULL; else mii_info->duplex = DUPLEX_HALF; } return 0; } static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) { /* Clear the interrupt by reading the reg */ uec_phy_read(mii_info, MII_DM9161_INTR); return 0; } static int dm9161_config_intr (struct uec_mii_info *mii_info) { if (mii_info->interrupts == MII_INTERRUPT_ENABLED) uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); else uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); return 0; } static void dm9161_close (struct uec_mii_info *mii_info) { } static int fixed_phy_aneg (struct uec_mii_info *mii_info) { mii_info->autoneg = 0; /* Turn off auto negotiation for fixed phy */ return 0; } static int fixed_phy_read_status (struct uec_mii_info *mii_info) { int i = 0; for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) { if (strncmp(mii_info->dev->name, fixed_phy_port[i].name, strlen(mii_info->dev->name)) == 0) { mii_info->speed = fixed_phy_port[i].speed; mii_info->duplex = fixed_phy_port[i].duplex; mii_info->link = 1; /* Link is always UP */ mii_info->pause = 0; break; } } return 0; } static int smsc_config_aneg (struct uec_mii_info *mii_info) { return 0; } static int smsc_read_status (struct uec_mii_info *mii_info) { u16 status; int err; /* Update the link, but return if there * was an error */ err = genmii_update_link (mii_info); if (err) return err; /* If the link is up, read the speed and duplex */ /* If we aren't autonegotiating, assume speeds * are as set */ if (mii_info->autoneg && mii_info->link) { int val; status = uec_phy_read(mii_info, 0x1f); val = (status & 0x1c) >> 2; switch (val) { case 1: mii_info->duplex = DUPLEX_HALF; mii_info->speed = SPEED_10; break; case 5: mii_info->duplex = DUPLEX_FULL; mii_info->speed = SPEED_10; break; case 2: mii_info->duplex = DUPLEX_HALF; mii_info->speed = SPEED_100; break; case 6: mii_info->duplex = DUPLEX_FULL; mii_info->speed = SPEED_100; break; } mii_info->pause = 0; } return 0; } static struct phy_info phy_info_dm9161 = { .phy_id = 0x0181b880, .phy_id_mask = 0x0ffffff0, .name = "Davicom DM9161E", .init = dm9161_init, .config_aneg = dm9161_config_aneg, .read_status = dm9161_read_status, .close = dm9161_close, }; static struct phy_info phy_info_dm9161a = { .phy_id = 0x0181b8a0, .phy_id_mask = 0x0ffffff0, .name = "Davicom DM9161A", .features = MII_BASIC_FEATURES, .init = dm9161_init, .config_aneg = dm9161_config_aneg, .read_status = dm9161_read_status, .ack_interrupt = dm9161_ack_interrupt, .config_intr = dm9161_config_intr, .close = dm9161_close, }; static struct phy_info phy_info_marvell = { .phy_id = 0x01410c00, .phy_id_mask = 0xffffff00, .name = "Marvell 88E11x1", .features = MII_GBIT_FEATURES, .init = &uec_marvell_init, .config_aneg = &marvell_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, }; static struct phy_info phy_info_bcm5481 = { .phy_id = 0x0143bca0, .phy_id_mask = 0xffffff0, .name = "Broadcom 5481", .features = MII_GBIT_FEATURES, .read_status = genmii_read_status, .init = bcm_init, }; static struct phy_info phy_info_fixedphy = { .phy_id = CONFIG_FIXED_PHY, .phy_id_mask = CONFIG_FIXED_PHY, .name = "Fixed PHY", .config_aneg = fixed_phy_aneg, .read_status = fixed_phy_read_status, }; static struct phy_info phy_info_smsclan8700 = { .phy_id = 0x0007c0c0, .phy_id_mask = 0xfffffff0, .name = "SMSC LAN8700", .features = MII_BASIC_FEATURES, .config_aneg = smsc_config_aneg, .read_status = smsc_read_status, }; static struct phy_info phy_info_genmii = { .phy_id = 0x00000000, .phy_id_mask = 0x00000000, .name = "Generic MII", .features = MII_BASIC_FEATURES, .config_aneg = genmii_config_aneg, .read_status = genmii_read_status, }; static struct phy_info *phy_info[] = { &phy_info_dm9161, &phy_info_dm9161a, &phy_info_marvell, &phy_info_bcm5481, &phy_info_smsclan8700, &phy_info_fixedphy, &phy_info_genmii, NULL }; u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum) { return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum); } void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val) { mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val); } /* Use the PHY ID registers to determine what type of PHY is attached * to device dev. return a struct phy_info structure describing that PHY */ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) { u16 phy_reg; u32 phy_ID; int i; struct phy_info *theInfo = NULL; /* Grab the bits from PHYIR1, and put them in the upper half */ phy_reg = uec_phy_read(mii_info, MII_PHYSID1); phy_ID = (phy_reg & 0xffff) << 16; /* Grab the bits from PHYIR2, and put them in the lower half */ phy_reg = uec_phy_read(mii_info, MII_PHYSID2); phy_ID |= (phy_reg & 0xffff); /* loop through all the known PHY types, and find one that */ /* matches the ID we read from the PHY. */ for (i = 0; phy_info[i]; i++) if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)) { theInfo = phy_info[i]; break; } /* This shouldn't happen, as we have generic PHY support */ if (theInfo == NULL) { ugphy_info ("UEC: PHY id %x is not supported!", phy_ID); return NULL; } else { ugphy_info ("UEC: PHY is %s (%x)", theInfo->name, phy_ID); } return theInfo; } void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type, int speed) { uec_private_t *uec = (uec_private_t *) dev->priv; struct uec_mii_info *mii_info; u16 status; if (!uec->mii_info) { printf ("%s: the PHY not initialized\n", __FUNCTION__); return; } mii_info = uec->mii_info; if (type == PHY_INTERFACE_MODE_RGMII) { if (speed == SPEED_100) { uec_phy_write(mii_info, 0x00, 0x9140); uec_phy_write(mii_info, 0x1d, 0x001f); uec_phy_write(mii_info, 0x1e, 0x200c); uec_phy_write(mii_info, 0x1d, 0x0005); uec_phy_write(mii_info, 0x1e, 0x0000); uec_phy_write(mii_info, 0x1e, 0x0100); uec_phy_write(mii_info, 0x09, 0x0e00); uec_phy_write(mii_info, 0x04, 0x01e1); uec_phy_write(mii_info, 0x00, 0x9140); uec_phy_write(mii_info, 0x00, 0x1000); udelay (100000); uec_phy_write(mii_info, 0x00, 0x2900); uec_phy_write(mii_info, 0x14, 0x0cd2); uec_phy_write(mii_info, 0x00, 0xa100); uec_phy_write(mii_info, 0x09, 0x0000); uec_phy_write(mii_info, 0x1b, 0x800b); uec_phy_write(mii_info, 0x04, 0x05e1); uec_phy_write(mii_info, 0x00, 0xa100); uec_phy_write(mii_info, 0x00, 0x2100); udelay (1000000); } else if (speed == SPEED_10) { uec_phy_write(mii_info, 0x14, 0x8e40); uec_phy_write(mii_info, 0x1b, 0x800b); uec_phy_write(mii_info, 0x14, 0x0c82); uec_phy_write(mii_info, 0x00, 0x8100); udelay (1000000); } } /* handle 88e1111 rev.B2 erratum 5.6 */ if (mii_info->autoneg) { status = uec_phy_read(mii_info, MII_BMCR); uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE); } /* now the B2 will correctly report autoneg completion status */ } void change_phy_interface_mode (struct eth_device *dev, phy_interface_t type, int speed) { #ifdef CONFIG_PHY_MODE_NEED_CHANGE marvell_phy_interface_mode (dev, type, speed); #endif }