#include <common.h> #include <mpc8xx.h> #include <pcmcia.h> #undef CONFIG_PCMCIA #if defined(CONFIG_CMD_PCMCIA) #define CONFIG_PCMCIA #endif #if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CONFIG_PCMCIA #endif #if defined(CONFIG_PCMCIA) #if defined(CONFIG_IDE_8xx_PCCARD) extern int check_ide_device (int slot); #endif extern int pcmcia_hardware_enable (int slot); extern int pcmcia_voltage_set(int slot, int vcc, int vpp); #if defined(CONFIG_CMD_PCMCIA) extern int pcmcia_hardware_disable(int slot); #endif static u_int m8xx_get_graycode(u_int size); #if 0 /* Disabled */ static u_int m8xx_get_speed(u_int ns, u_int is_io); #endif /* look up table for pgcrx registers */ u_int *pcmcia_pgcrx[2] = { &((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcra, &((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb, }; /* * Search this table to see if the windowsize is * supported... */ #define M8XX_SIZES_NO 32 static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] = { 0x00000001, 0x00000002, 0x00000008, 0x00000004, 0x00000080, 0x00000040, 0x00000010, 0x00000020, 0x00008000, 0x00004000, 0x00001000, 0x00002000, 0x00000100, 0x00000200, 0x00000800, 0x00000400, 0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x01000000, 0x02000000, 0xffffffff, 0x04000000, 0x00010000, 0x00020000, 0x00080000, 0x00040000, 0x00800000, 0x00400000, 0x00100000, 0x00200000 }; /* -------------------------------------------------------------------- */ #ifdef CONFIG_HMI10 #define HMI10_FRAM_TIMING ( PCMCIA_SHT(2) \ | PCMCIA_SST(2) \ | PCMCIA_SL(4)) #endif #if defined(CONFIG_LWMON) || defined(CONFIG_NSCU) #define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(9) \ | PCMCIA_SST(3) \ | PCMCIA_SL(12)) #else #define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(2) \ | PCMCIA_SST(4) \ | PCMCIA_SL(9)) #endif /* -------------------------------------------------------------------- */ int pcmcia_on (void) { u_long reg, base; pcmcia_win_t *win; u_int slotbit; u_int rc, slot; int i; debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n"); /* intialize the fixed memory windows */ win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0); base = CONFIG_SYS_PCMCIA_MEM_ADDR; if((reg = m8xx_get_graycode(CONFIG_SYS_PCMCIA_MEM_SIZE)) == -1) { printf ("Cannot set window size to 0x%08x\n", CONFIG_SYS_PCMCIA_MEM_SIZE); return (1); } slotbit = PCMCIA_SLOT_x; for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) { win->br = base; #if (PCMCIA_SOCKETS_NO == 2) if (i == 4) /* Another slot starting from win 4 */ slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B); #endif switch (i) { #ifdef CONFIG_IDE_8xx_PCCARD case 4: #ifdef CONFIG_HMI10 { /* map FRAM area */ win->or = ( PCMCIA_BSIZE_256K | PCMCIA_PPS_8 | PCMCIA_PRS_ATTR | slotbit | PCMCIA_PV | HMI10_FRAM_TIMING ); break; } #endif case 0: { /* map attribute memory */ win->or = ( PCMCIA_BSIZE_64M | PCMCIA_PPS_8 | PCMCIA_PRS_ATTR | slotbit | PCMCIA_PV | CONFIG_SYS_PCMCIA_TIMING ); break; } case 5: case 1: { /* map I/O window for data reg */ win->or = ( PCMCIA_BSIZE_1K | PCMCIA_PPS_16 | PCMCIA_PRS_IO | slotbit | PCMCIA_PV | CONFIG_SYS_PCMCIA_TIMING ); break; } case 6: case 2: { /* map I/O window for cmd/ctrl reg block */ win->or = ( PCMCIA_BSIZE_1K | PCMCIA_PPS_8 | PCMCIA_PRS_IO | slotbit | PCMCIA_PV | CONFIG_SYS_PCMCIA_TIMING ); break; } #endif /* CONFIG_IDE_8xx_PCCARD */ #ifdef CONFIG_HMI10 case 3: { /* map I/O window for 4xUART data/ctrl */ win->br += 0x40000; win->or = ( PCMCIA_BSIZE_256K | PCMCIA_PPS_8 | PCMCIA_PRS_IO | slotbit | PCMCIA_PV | CONFIG_SYS_PCMCIA_TIMING ); break; } #endif /* CONFIG_HMI10 */ default: /* set to not valid */ win->or = 0; break; } debug ("MemWin %d: PBR 0x%08lX POR %08lX\n", i, win->br, win->or); base += CONFIG_SYS_PCMCIA_MEM_SIZE; ++win; } for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) { /* turn off voltage */ if ((rc = pcmcia_voltage_set(slot, 0, 0))) continue; /* Enable external hardware */ if ((rc = pcmcia_hardware_enable(slot))) continue; #ifdef CONFIG_IDE_8xx_PCCARD if ((rc = check_ide_device(i))) continue; #endif } return rc; } #if defined(CONFIG_CMD_PCMCIA) int pcmcia_off (void) { int i; pcmcia_win_t *win; printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n"); /* clear interrupt state, and disable interrupts */ ((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pscr = PCMCIA_MASK(_slot_); ((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_); /* turn off interrupt and disable CxOE */ PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE; /* turn off memory windows */ win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0); for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) { /* disable memory window */ win->or = 0; ++win; } /* turn off voltage */ pcmcia_voltage_set(_slot_, 0, 0); /* disable external hardware */ printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n"); pcmcia_hardware_disable(_slot_); return 0; } #endif static u_int m8xx_get_graycode(u_int size) { u_int k; for (k = 0; k < M8XX_SIZES_NO; k++) { if(m8xx_size_to_gray[k] == size) break; } if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1)) k = -1; return k; } #if 0 #if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) /* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks. * SYPCR is write once only, therefore must the slowest memory be faster * than the bus monitor or we will get a machine check due to the bus timeout. */ #undef PCMCIA_BMT_LIMIT #define PCMCIA_BMT_LIMIT (6*8) #endif static u_int m8xx_get_speed(u_int ns, u_int is_io) { u_int reg, clocks, psst, psl, psht; if(!ns) { /* * We get called with IO maps setup to 0ns * if not specified by the user. * They should be 255ns. */ if(is_io) ns = 255; else ns = 100; /* fast memory if 0 */ } /* * In PSST, PSL, PSHT fields we tell the controller * timing parameters in CLKOUT clock cycles. * CLKOUT is the same as GCLK2_50. */ /* how we want to adjust the timing - in percent */ #define ADJ 180 /* 80 % longer accesstime - to be sure */ clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000; clocks = (clocks * ADJ) / (100*1000); if(clocks >= PCMCIA_BMT_LIMIT) { DEBUG(0, "Max access time limit reached\n"); clocks = PCMCIA_BMT_LIMIT-1; } psst = clocks / 7; /* setup time */ psht = clocks / 7; /* hold time */ psl = (clocks * 5) / 7; /* strobe length */ psst += clocks - (psst + psht + psl); reg = psst << 12; reg |= psl << 7; reg |= psht << 16; return reg; } #endif /* 0 */ #endif /* CONFIG_PCMCIA */