/* * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. * * Author: Roy Zang <tie-fei.zang@freescale.com>, Sep, 2007 * * Description: * ULI 526x Ethernet port driver. * Based on the Linux driver: drivers/net/tulip/uli526x.c * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include <common.h> #include <malloc.h> #include <net.h> #include <netdev.h> #include <asm/io.h> #include <pci.h> #include <miiphy.h> /* some kernel function compatible define */ #undef DEBUG /* Board/System/Debug information/definition */ #define ULI_VENDOR_ID 0x10B9 #define ULI5261_DEVICE_ID 0x5261 #define ULI5263_DEVICE_ID 0x5263 /* ULi M5261 ID*/ #define PCI_ULI5261_ID (ULI5261_DEVICE_ID << 16 | ULI_VENDOR_ID) /* ULi M5263 ID*/ #define PCI_ULI5263_ID (ULI5263_DEVICE_ID << 16 | ULI_VENDOR_ID) #define ULI526X_IO_SIZE 0x100 #define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ #define RX_DESC_CNT PKTBUFSRX /* Allocated Rx descriptors */ #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) #define TX_BUF_ALLOC 0x300 #define RX_ALLOC_SIZE PKTSIZE #define ULI526X_RESET 1 #define CR0_DEFAULT 0 #define CR6_DEFAULT 0x22200000 #define CR7_DEFAULT 0x180c1 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ #define MAX_PACKET_SIZE 1514 #define ULI5261_MAX_MULTICAST 14 #define RX_COPY_SIZE 100 #define MAX_CHECK_PACKET 0x8000 #define ULI526X_10MHF 0 #define ULI526X_100MHF 1 #define ULI526X_10MFD 4 #define ULI526X_100MFD 5 #define ULI526X_AUTO 8 #define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ #define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ #define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ #define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ #define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ #define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ /* CR9 definition: SROM/MII */ #define CR9_SROM_READ 0x4800 #define CR9_SRCS 0x1 #define CR9_SRCLK 0x2 #define CR9_CRDOUT 0x8 #define SROM_DATA_0 0x0 #define SROM_DATA_1 0x4 #define PHY_DATA_1 0x20000 #define PHY_DATA_0 0x00000 #define MDCLKH 0x10000 #define PHY_POWER_DOWN 0x800 #define SROM_V41_CODE 0x14 #define SROM_CLK_WRITE(data, ioaddr) do { \ outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \ udelay(5); \ outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK, ioaddr); \ udelay(5); \ outl(data|CR9_SROM_READ|CR9_SRCS, ioaddr); \ udelay(5); \ } while (0) /* Structure/enum declaration */ struct tx_desc { u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ char *tx_buf_ptr; /* Data for us */ struct tx_desc *next_tx_desc; }; struct rx_desc { u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ char *rx_buf_ptr; /* Data for us */ struct rx_desc *next_rx_desc; }; struct uli526x_board_info { u32 chip_id; /* Chip vendor/Device ID */ pci_dev_t pdev; long ioaddr; /* I/O base address */ u32 cr0_data; u32 cr5_data; u32 cr6_data; u32 cr7_data; u32 cr15_data; /* pointer for memory physical address */ dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ dma_addr_t first_tx_desc_dma; dma_addr_t first_rx_desc_dma; /* descriptor pointer */ unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ unsigned char *buf_pool_start; /* Tx buffer pool align dword */ unsigned char *desc_pool_ptr; /* descriptor pool memory */ struct tx_desc *first_tx_desc; struct tx_desc *tx_insert_ptr; struct tx_desc *tx_remove_ptr; struct rx_desc *first_rx_desc; struct rx_desc *rx_ready_ptr; /* packet come pointer */ unsigned long tx_packet_cnt; /* transmitted packet count */ u16 PHY_reg4; /* Saved Phyxcer register 4 value */ u8 media_mode; /* user specify media mode */ u8 op_mode; /* real work dedia mode */ u8 phy_addr; /* NIC SROM data */ unsigned char srom[128]; }; enum uli526x_offsets { DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, DCR15 = 0x78 }; enum uli526x_CR6_bits { CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 }; /* Global variable declaration -- */ static unsigned char uli526x_media_mode = ULI526X_AUTO; static struct tx_desc desc_pool_array[DESC_ALL_CNT + 0x20] __attribute__ ((aligned(32))); static char buf_pool[TX_BUF_ALLOC * TX_DESC_CNT + 4]; /* For module input parameter */ static int mode = 8; /* function declaration -- */ static int uli526x_start_xmit(struct eth_device *dev, volatile void *packet, int length); static const struct ethtool_ops netdev_ethtool_ops; static u16 read_srom_word(long, int); static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); static u16 phy_read(unsigned long, u8, u8, u32); static u16 phy_readby_cr10(unsigned long, u8, u8); static void phy_write(unsigned long, u8, u8, u16, u32); static void phy_writeby_cr10(unsigned long, u8, u8, u16); static void phy_write_1bit(unsigned long, u32, u32); static u16 phy_read_1bit(unsigned long, u32); static int uli526x_rx_packet(struct eth_device *); static void uli526x_free_tx_pkt(struct eth_device *, struct uli526x_board_info *); static void uli526x_reuse_buf(struct rx_desc *); static void uli526x_init(struct eth_device *); static void uli526x_set_phyxcer(struct uli526x_board_info *); static int uli526x_init_one(struct eth_device *, bd_t *); static void uli526x_disable(struct eth_device *); static void set_mac_addr(struct eth_device *); static struct pci_device_id uli526x_pci_tbl[] = { { ULI_VENDOR_ID, ULI5261_DEVICE_ID}, /* 5261 device */ { ULI_VENDOR_ID, ULI5263_DEVICE_ID}, /* 5263 device */ {} }; /* ULI526X network board routine */ /* * Search ULI526X board, register it */ int uli526x_initialize(bd_t *bis) { pci_dev_t devno; int card_number = 0; struct eth_device *dev; struct uli526x_board_info *db; /* board information structure */ u32 iobase; int idx = 0; while (1) { /* Find PCI device */ devno = pci_find_devices(uli526x_pci_tbl, idx++); if (devno < 0) break; pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); iobase &= ~0xf; dev = (struct eth_device *)malloc(sizeof *dev); sprintf(dev->name, "uli526x#%d\n", card_number); db = (struct uli526x_board_info *) malloc(sizeof(struct uli526x_board_info)); dev->priv = db; db->pdev = devno; dev->iobase = iobase; dev->init = uli526x_init_one; dev->halt = uli526x_disable; dev->send = uli526x_start_xmit; dev->recv = uli526x_rx_packet; /* init db */ db->ioaddr = dev->iobase; /* get chip id */ pci_read_config_dword(devno, PCI_VENDOR_ID, &db->chip_id); #ifdef DEBUG printf("uli526x: uli526x @0x%x\n", iobase); printf("uli526x: chip_id%x\n", db->chip_id); #endif eth_register(dev); card_number++; pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20); udelay(10 * 1000); } return card_number; } static int uli526x_init_one(struct eth_device *dev, bd_t *bis) { struct uli526x_board_info *db = dev->priv; int i; switch (mode) { case ULI526X_10MHF: case ULI526X_100MHF: case ULI526X_10MFD: case ULI526X_100MFD: uli526x_media_mode = mode; break; default: uli526x_media_mode = ULI526X_AUTO; break; } /* Allocate Tx/Rx descriptor memory */ db->desc_pool_ptr = (uchar *)&desc_pool_array[0]; db->desc_pool_dma_ptr = (dma_addr_t)&desc_pool_array[0]; if (db->desc_pool_ptr == NULL) return -1; db->buf_pool_ptr = (uchar *)&buf_pool[0]; db->buf_pool_dma_ptr = (dma_addr_t)&buf_pool[0]; if (db->buf_pool_ptr == NULL) return -1; db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; db->first_tx_desc_dma = db->desc_pool_dma_ptr; db->buf_pool_start = db->buf_pool_ptr; db->buf_pool_dma_start = db->buf_pool_dma_ptr; #ifdef DEBUG printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr); printf("%s(): media_mode= 0x%x\n", __FUNCTION__, uli526x_media_mode); printf("%s(): db->desc_pool_ptr= 0x%x\n", __FUNCTION__, db->desc_pool_ptr); printf("%s(): db->desc_pool_dma_ptr= 0x%x\n", __FUNCTION__, db->desc_pool_dma_ptr); printf("%s(): db->buf_pool_ptr= 0x%x\n", __FUNCTION__, db->buf_pool_ptr); printf("%s(): db->buf_pool_dma_ptr= 0x%x\n", __FUNCTION__, db->buf_pool_dma_ptr); #endif /* read 64 word srom data */ for (i = 0; i < 64; i++) ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); /* Set Node address */ if (((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so write MAC address to ID Table */ set_mac_addr(dev); else { /*Exist SROM*/ for (i = 0; i < 6; i++) dev->enetaddr[i] = db->srom[20 + i]; } #ifdef DEBUG for (i = 0; i < 6; i++) printf("%c%02x", i ? ':' : ' ', dev->enetaddr[i]); #endif db->PHY_reg4 = 0x1e0; /* system variable init */ db->cr6_data = CR6_DEFAULT ; db->cr6_data |= ULI526X_TXTH_256; db->cr0_data = CR0_DEFAULT; uli526x_init(dev); return 0; } static void uli526x_disable(struct eth_device *dev) { #ifdef DEBUG printf("uli526x_disable\n"); #endif struct uli526x_board_info *db = dev->priv; if (!((inl(db->ioaddr + DCR12)) & 0x8)) { /* Reset & stop ULI526X board */ outl(ULI526X_RESET, db->ioaddr + DCR0); udelay(5); phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); /* reset the board */ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ update_cr6(db->cr6_data, dev->iobase); outl(0, dev->iobase + DCR7); /* Disable Interrupt */ outl(inl(dev->iobase + DCR5), dev->iobase + DCR5); } } /* Initialize ULI526X board * Reset ULI526X board * Initialize TX/Rx descriptor chain structure * Send the set-up frame * Enable Tx/Rx machine */ static void uli526x_init(struct eth_device *dev) { struct uli526x_board_info *db = dev->priv; u8 phy_tmp; u16 phy_value; u16 phy_reg_reset; /* Reset M526x MAC controller */ outl(ULI526X_RESET, db->ioaddr + DCR0); /* RESET MAC */ udelay(100); outl(db->cr0_data, db->ioaddr + DCR0); udelay(5); /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ db->phy_addr = 1; db->tx_packet_cnt = 0; for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) { /* peer add */ phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id); if (phy_value != 0xffff && phy_value != 0) { db->phy_addr = phy_tmp; break; } } #ifdef DEBUG printf("%s(): db->ioaddr= 0x%x\n", __FUNCTION__, db->ioaddr); printf("%s(): db->phy_addr= 0x%x\n", __FUNCTION__, db->phy_addr); #endif if (phy_tmp == 32) printf("Can not find the phy address!!!"); /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; if (!(inl(db->ioaddr + DCR12) & 0x8)) { /* Phyxcer capability setting */ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); udelay(500); /* Process Phyxcer Media Mode */ uli526x_set_phyxcer(db); } /* Media Mode Process */ if (!(db->media_mode & ULI526X_AUTO)) db->op_mode = db->media_mode; /* Force Mode */ /* Initialize Transmit/Receive decriptor and CR3/4 */ uli526x_descriptor_init(db, db->ioaddr); /* Init CR6 to program M526X operation */ update_cr6(db->cr6_data, db->ioaddr); /* Init CR7, interrupt active bit */ db->cr7_data = CR7_DEFAULT; outl(db->cr7_data, db->ioaddr + DCR7); /* Init CR15, Tx jabber and Rx watchdog timer */ outl(db->cr15_data, db->ioaddr + DCR15); /* Enable ULI526X Tx/Rx function */ db->cr6_data |= CR6_RXSC | CR6_TXSC; update_cr6(db->cr6_data, db->ioaddr); while (!(inl(db->ioaddr + DCR12) & 0x8)) udelay(10); } /* * Hardware start transmission. * Send a packet to media from the upper layer. */ static int uli526x_start_xmit(struct eth_device *dev, volatile void *packet, int length) { struct uli526x_board_info *db = dev->priv; struct tx_desc *txptr; unsigned int len = length; /* Too large packet check */ if (len > MAX_PACKET_SIZE) { printf(": big packet = %d\n", len); return 0; } /* No Tx resource check, it never happen nromally */ if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { printf("No Tx resource %ld\n", db->tx_packet_cnt); return 0; } /* Disable NIC interrupt */ outl(0, dev->iobase + DCR7); /* transmit this packet */ txptr = db->tx_insert_ptr; memcpy((char *)txptr->tx_buf_ptr, (char *)packet, (int)length); txptr->tdes1 = cpu_to_le32(0xe1000000 | length); /* Point to next transmit free descriptor */ db->tx_insert_ptr = txptr->next_tx_desc; /* Transmit Packet Process */ if ((db->tx_packet_cnt < TX_DESC_CNT)) { txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ db->tx_packet_cnt++; /* Ready to send */ outl(0x1, dev->iobase + DCR1); /* Issue Tx polling */ } /* Got ULI526X status */ db->cr5_data = inl(db->ioaddr + DCR5); outl(db->cr5_data, db->ioaddr + DCR5); #ifdef TX_DEBUG printf("%s(): length = 0x%x\n", __FUNCTION__, length); printf("%s(): cr5_data=%x\n", __FUNCTION__, db->cr5_data); #endif outl(db->cr7_data, dev->iobase + DCR7); uli526x_free_tx_pkt(dev, db); return length; } /* * Free TX resource after TX complete */ static void uli526x_free_tx_pkt(struct eth_device *dev, struct uli526x_board_info *db) { struct tx_desc *txptr; u32 tdes0; txptr = db->tx_remove_ptr; while (db->tx_packet_cnt) { tdes0 = le32_to_cpu(txptr->tdes0); /* printf(DRV_NAME ": tdes0=%x\n", tdes0); */ if (tdes0 & 0x80000000) break; /* A packet sent completed */ db->tx_packet_cnt--; if (tdes0 != 0x7fffffff) { #ifdef TX_DEBUG printf("%s()tdes0=%x\n", __FUNCTION__, tdes0); #endif if (tdes0 & TDES0_ERR_MASK) { if (tdes0 & 0x0002) { /* UnderRun */ if (!(db->cr6_data & CR6_SFT)) { db->cr6_data = db->cr6_data | CR6_SFT; update_cr6(db->cr6_data, db->ioaddr); } } } } txptr = txptr->next_tx_desc; }/* End of while */ /* Update TX remove pointer to next */ db->tx_remove_ptr = txptr; } /* * Receive the come packet and pass to upper layer */ static int uli526x_rx_packet(struct eth_device *dev) { struct uli526x_board_info *db = dev->priv; struct rx_desc *rxptr; int rxlen = 0; u32 rdes0; rxptr = db->rx_ready_ptr; rdes0 = le32_to_cpu(rxptr->rdes0); #ifdef RX_DEBUG printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0); #endif if (!(rdes0 & 0x80000000)) { /* packet owner check */ if ((rdes0 & 0x300) != 0x300) { /* A packet without First/Last flag */ /* reuse this buf */ printf("A packet without First/Last flag"); uli526x_reuse_buf(rxptr); } else { /* A packet with First/Last flag */ rxlen = ((rdes0 >> 16) & 0x3fff) - 4; #ifdef RX_DEBUG printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen); #endif /* error summary bit check */ if (rdes0 & 0x8000) { /* This is a error packet */ printf("Error: rdes0: %x\n", rdes0); } if (!(rdes0 & 0x8000) || ((db->cr6_data & CR6_PM) && (rxlen > 6))) { #ifdef RX_DEBUG printf("%s(): rx_skb_ptr =%x\n", __FUNCTION__, rxptr->rx_buf_ptr); printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen); printf("%s(): buf addr =%x\n", __FUNCTION__, rxptr->rx_buf_ptr); printf("%s(): rxlen =%x\n", __FUNCTION__, rxlen); int i; for (i = 0; i < 0x20; i++) printf("%s(): data[%x] =%x\n", __FUNCTION__, i, rxptr->rx_buf_ptr[i]); #endif NetReceive((uchar *)rxptr->rx_buf_ptr, rxlen); uli526x_reuse_buf(rxptr); } else { /* Reuse SKB buffer when the packet is error */ printf("Reuse buffer, rdes0"); uli526x_reuse_buf(rxptr); } } rxptr = rxptr->next_rx_desc; } db->rx_ready_ptr = rxptr; return rxlen; } /* * Reuse the RX buffer */ static void uli526x_reuse_buf(struct rx_desc *rxptr) { if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) rxptr->rdes0 = cpu_to_le32(0x80000000); else printf("Buffer reuse method error"); } /* * Initialize transmit/Receive descriptor * Using Chain structure, and allocate Tx/Rx buffer */ static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) { struct tx_desc *tmp_tx; struct rx_desc *tmp_rx; unsigned char *tmp_buf; dma_addr_t tmp_tx_dma, tmp_rx_dma; dma_addr_t tmp_buf_dma; int i; /* tx descriptor start pointer */ db->tx_insert_ptr = db->first_tx_desc; db->tx_remove_ptr = db->first_tx_desc; outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ /* rx descriptor start pointer */ db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; db->rx_ready_ptr = db->first_rx_desc; outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ #ifdef DEBUG printf("%s(): db->first_tx_desc= 0x%x\n", __FUNCTION__, db->first_tx_desc); printf("%s(): db->first_rx_desc_dma= 0x%x\n", __FUNCTION__, db->first_rx_desc_dma); #endif /* Init Transmit chain */ tmp_buf = db->buf_pool_start; tmp_buf_dma = db->buf_pool_dma_start; tmp_tx_dma = db->first_tx_desc_dma; for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { tmp_tx->tx_buf_ptr = (char *)tmp_buf; tmp_tx->tdes0 = cpu_to_le32(0); tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); tmp_tx_dma += sizeof(struct tx_desc); tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); tmp_tx->next_tx_desc = tmp_tx + 1; tmp_buf = tmp_buf + TX_BUF_ALLOC; tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; } (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); tmp_tx->next_tx_desc = db->first_tx_desc; /* Init Receive descriptor chain */ tmp_rx_dma = db->first_rx_desc_dma; for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { tmp_rx->rdes0 = cpu_to_le32(0); tmp_rx->rdes1 = cpu_to_le32(0x01000600); tmp_rx_dma += sizeof(struct rx_desc); tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); tmp_rx->next_rx_desc = tmp_rx + 1; } (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); tmp_rx->next_rx_desc = db->first_rx_desc; /* pre-allocate Rx buffer */ allocate_rx_buffer(db); } /* * Update CR6 value * Firstly stop ULI526X, then written value and start */ static void update_cr6(u32 cr6_data, unsigned long ioaddr) { outl(cr6_data, ioaddr + DCR6); udelay(5); } /* * Allocate rx buffer, */ static void allocate_rx_buffer(struct uli526x_board_info *db) { int index; struct rx_desc *rxptr; rxptr = db->first_rx_desc; u32 addr; for (index = 0; index < RX_DESC_CNT; index++) { addr = (u32)NetRxPackets[index]; addr += (16 - (addr & 15)); rxptr->rx_buf_ptr = (char *) addr; rxptr->rdes2 = cpu_to_le32(addr); rxptr->rdes0 = cpu_to_le32(0x80000000); #ifdef DEBUG printf("%s(): Number 0x%x:\n", __FUNCTION__, index); printf("%s(): addr 0x%x:\n", __FUNCTION__, addr); printf("%s(): rxptr address = 0x%x\n", __FUNCTION__, rxptr); printf("%s(): rxptr buf address = 0x%x\n", \ __FUNCTION__, rxptr->rx_buf_ptr); printf("%s(): rdes2 = 0x%x\n", __FUNCTION__, rxptr->rdes2); #endif rxptr = rxptr->next_rx_desc; } } /* * Read one word data from the serial ROM */ static u16 read_srom_word(long ioaddr, int offset) { int i; u16 srom_data = 0; long cr9_ioaddr = ioaddr + DCR9; outl(CR9_SROM_READ, cr9_ioaddr); outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); /* Send the Read Command 110b */ SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); /* Send the offset */ for (i = 5; i >= 0; i--) { srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; SROM_CLK_WRITE(srom_data, cr9_ioaddr); } outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); for (i = 16; i > 0; i--) { outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); udelay(5); srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); udelay(5); } outl(CR9_SROM_READ, cr9_ioaddr); return srom_data; } /* * Set 10/100 phyxcer capability * AUTO mode : phyxcer register4 is NIC capability * Force mode: phyxcer register4 is the force media */ static void uli526x_set_phyxcer(struct uli526x_board_info *db) { u16 phy_reg; /* Phyxcer capability setting */ phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; if (db->media_mode & ULI526X_AUTO) { /* AUTO Mode */ phy_reg |= db->PHY_reg4; } else { /* Force Mode */ switch (db->media_mode) { case ULI526X_10MHF: phy_reg |= 0x20; break; case ULI526X_10MFD: phy_reg |= 0x40; break; case ULI526X_100MHF: phy_reg |= 0x80; break; case ULI526X_100MFD: phy_reg |= 0x100; break; } } /* Write new capability to Phyxcer Reg4 */ if (!(phy_reg & 0x01e0)) { phy_reg |= db->PHY_reg4; db->media_mode |= ULI526X_AUTO; } phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); /* Restart Auto-Negotiation */ phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); udelay(50); } /* * Write a word to Phy register */ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) { u16 i; unsigned long ioaddr; if (chip_id == PCI_ULI5263_ID) { phy_writeby_cr10(iobase, phy_addr, offset, phy_data); return; } /* M5261/M5263 Chip */ ioaddr = iobase + DCR9; /* Send 33 synchronization clock to Phy controller */ for (i = 0; i < 35; i++) phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); /* Send start command(01) to Phy */ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); /* Send write command(01) to Phy */ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); /* Send Phy address */ for (i = 0x10; i > 0; i = i >> 1) phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); /* Send register address */ for (i = 0x10; i > 0; i = i >> 1) phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); /* written trasnition */ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); /* Write a word data to PHY controller */ for (i = 0x8000; i > 0; i >>= 1) phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); } /* * Read a word data from phy register */ static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) { int i; u16 phy_data; unsigned long ioaddr; if (chip_id == PCI_ULI5263_ID) return phy_readby_cr10(iobase, phy_addr, offset); /* M5261/M5263 Chip */ ioaddr = iobase + DCR9; /* Send 33 synchronization clock to Phy controller */ for (i = 0; i < 35; i++) phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); /* Send start command(01) to Phy */ phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); /* Send read command(10) to Phy */ phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); /* Send Phy address */ for (i = 0x10; i > 0; i = i >> 1) phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); /* Send register address */ for (i = 0x10; i > 0; i = i >> 1) phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); /* Skip transition state */ phy_read_1bit(ioaddr, chip_id); /* read 16bit data */ for (phy_data = 0, i = 0; i < 16; i++) { phy_data <<= 1; phy_data |= phy_read_1bit(ioaddr, chip_id); } return phy_data; } static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) { unsigned long ioaddr, cr10_value; ioaddr = iobase + DCR10; cr10_value = phy_addr; cr10_value = (cr10_value<<5) + offset; cr10_value = (cr10_value<<16) + 0x08000000; outl(cr10_value, ioaddr); udelay(1); while (1) { cr10_value = inl(ioaddr); if (cr10_value & 0x10000000) break; } return (cr10_value&0x0ffff); } static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) { unsigned long ioaddr, cr10_value; ioaddr = iobase + DCR10; cr10_value = phy_addr; cr10_value = (cr10_value<<5) + offset; cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; outl(cr10_value, ioaddr); udelay(1); } /* * Write one bit data to Phy Controller */ static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) { outl(phy_data , ioaddr); /* MII Clock Low */ udelay(1); outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ udelay(1); outl(phy_data , ioaddr); /* MII Clock Low */ udelay(1); } /* * Read one bit phy data from PHY controller */ static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) { u16 phy_data; outl(0x50000 , ioaddr); udelay(1); phy_data = (inl(ioaddr) >> 19) & 0x1; outl(0x40000 , ioaddr); udelay(1); return phy_data; } /* * Set MAC address to ID Table */ static void set_mac_addr(struct eth_device *dev) { int i; u16 addr; struct uli526x_board_info *db = dev->priv; outl(0x10000, db->ioaddr + DCR0); /* Diagnosis mode */ /* Reset dianostic pointer port */ outl(0x1c0, db->ioaddr + DCR13); outl(0, db->ioaddr + DCR14); /* Clear reset port */ outl(0x10, db->ioaddr + DCR14); /* Reset ID Table pointer */ outl(0, db->ioaddr + DCR14); /* Clear reset port */ outl(0, db->ioaddr + DCR13); /* Clear CR13 */ /* Select ID Table access port */ outl(0x1b0, db->ioaddr + DCR13); /* Read MAC address from CR14 */ for (i = 0; i < 3; i++) { addr = dev->enetaddr[2 * i] | (dev->enetaddr[2 * i + 1] << 8); outl(addr, db->ioaddr + DCR14); } /* write end */ outl(0, db->ioaddr + DCR13); /* Clear CR13 */ outl(0, db->ioaddr + DCR0); /* Clear CR0 */ udelay(10); return; }