/* * sh_eth.c - Driver for Renesas SH7763's ethernet controler. * * Copyright (C) 2008 Renesas Solutions Corp. * Copyright (c) 2008 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <config.h> #include <common.h> #include <malloc.h> #include <net.h> #include <asm/errno.h> #include <asm/io.h> #include "sh_eth.h" #ifndef CONFIG_SH_ETHER_USE_PORT # error "Please define CONFIG_SH_ETHER_USE_PORT" #endif #ifndef CONFIG_SH_ETHER_PHY_ADDR # error "Please define CONFIG_SH_ETHER_PHY_ADDR" #endif extern int eth_init(bd_t *bd); extern void eth_halt(void); extern int eth_rx(void); extern int eth_send(volatile void *packet, int length); static struct dev_info_s *dev; /* * Bits are written to the PHY serially using the * PIR register, just like a bit banger. */ static void sh_eth_mii_write_phy_bits(int port, u32 val, int len) { int i; u32 pir; /* Bit positions is 1 less than the number of bits */ for (i = len - 1; i >= 0; i--) { /* Write direction, bit to write, clock is low */ pir = 2 | ((val & 1 << i) ? 1 << 2 : 0); outl(pir, PIR(port)); udelay(1); /* Write direction, bit to write, clock is high */ pir = 3 | ((val & 1 << i) ? 1 << 2 : 0); outl(pir, PIR(port)); udelay(1); /* Write direction, bit to write, clock is low */ pir = 2 | ((val & 1 << i) ? 1 << 2 : 0); outl(pir, PIR(port)); udelay(1); } } static void sh_eth_mii_bus_release(int port) { /* Read direction, clock is low */ outl(0, PIR(port)); udelay(1); /* Read direction, clock is high */ outl(1, PIR(port)); udelay(1); /* Read direction, clock is low */ outl(0, PIR(port)); udelay(1); } static void sh_eth_mii_ind_bus_release(int port) { /* Read direction, clock is low */ outl(0, PIR(port)); udelay(1); } static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len) { int i; u32 pir; *val = 0; for (i = len - 1; i >= 0; i--) { /* Read direction, clock is high */ outl(1, PIR(port)); udelay(1); /* Read bit */ pir = inl(PIR(port)); *val |= (pir & 8) ? 1 << i : 0; /* Read direction, clock is low */ outl(0, PIR(port)); udelay(1); } return 0; } #define PHY_INIT 0xFFFFFFFF #define PHY_READ 0x02 #define PHY_WRITE 0x01 /* * To read a phy register, mii managements frames are sent to the phy. * The frames look like this: * pre (32 bits): 0xffff ffff * st (2 bits): 01 * op (2bits): 10: read 01: write * phyad (5 bits): xxxxx * regad (5 bits): xxxxx * ta (Bus release): * data (16 bits): read data */ static u32 sh_eth_mii_read_phy_reg(int port, u8 phy_addr, int reg) { u32 val; /* Sent mii management frame */ /* pre */ sh_eth_mii_write_phy_bits(port, PHY_INIT, 32); /* st (start of frame) */ sh_eth_mii_write_phy_bits(port, 0x1, 2); /* op (code) */ sh_eth_mii_write_phy_bits(port, PHY_READ, 2); /* phy address */ sh_eth_mii_write_phy_bits(port, phy_addr, 5); /* Register to read */ sh_eth_mii_write_phy_bits(port, reg, 5); /* Bus release */ sh_eth_mii_bus_release(port); /* Read register */ sh_eth_mii_read_phy_bits(port, &val, 16); return val; } /* * To write a phy register, mii managements frames are sent to the phy. * The frames look like this: * pre (32 bits): 0xffff ffff * st (2 bits): 01 * op (2bits): 10: read 01: write * phyad (5 bits): xxxxx * regad (5 bits): xxxxx * ta (2 bits): 10 * data (16 bits): write data * idle (Independent bus release) */ static void sh_eth_mii_write_phy_reg(int port, u8 phy_addr, int reg, u16 val) { /* Sent mii management frame */ /* pre */ sh_eth_mii_write_phy_bits(port, PHY_INIT, 32); /* st (start of frame) */ sh_eth_mii_write_phy_bits(port, 0x1, 2); /* op (code) */ sh_eth_mii_write_phy_bits(port, PHY_WRITE, 2); /* phy address */ sh_eth_mii_write_phy_bits(port, phy_addr, 5); /* Register to read */ sh_eth_mii_write_phy_bits(port, reg, 5); /* ta */ sh_eth_mii_write_phy_bits(port, PHY_READ, 2); /* Write register data */ sh_eth_mii_write_phy_bits(port, val, 16); /* Independent bus release */ sh_eth_mii_ind_bus_release(port); } void eth_halt(void) { } int eth_send(volatile void *packet, int len) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; int timeout; int rc = 0; if (!packet || len > 0xffff) { printf("eth_send: Invalid argument\n"); return -EINVAL; } /* packet must be a 4 byte boundary */ if ((int)packet & (4 - 1)) { printf("eth_send: packet not 4 byte alligned\n"); return -EFAULT; } /* Update tx descriptor */ port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet); port_info->tx_desc_cur->td1 = len << 16; /* Must preserve the end of descriptor list indication */ if (port_info->tx_desc_cur->td0 & TD_TDLE) port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE; else port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP; /* Restart the transmitter if disabled */ if (!(inl(EDTRR(port)) & EDTRR_TRNS)) outl(EDTRR_TRNS, EDTRR(port)); /* Wait until packet is transmitted */ timeout = 1000; while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--) udelay(100); if (timeout < 0) { printf("eth_send: transmit timeout\n"); rc = -1; goto err; } err: port_info->tx_desc_cur++; if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC) port_info->tx_desc_cur = port_info->tx_desc_base; return rc; } int eth_rx(void) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; int len = 0; volatile u8 *packet; /* Check if the rx descriptor is ready */ if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) { /* Check for errors */ if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) { len = port_info->rx_desc_cur->rd1 & 0xffff; packet = (volatile u8 *) ADDR_TO_P2(port_info->rx_desc_cur->rd2); NetReceive(packet, len); } /* Make current descriptor available again */ if (port_info->rx_desc_cur->rd0 & RD_RDLE) port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE; else port_info->rx_desc_cur->rd0 = RD_RACT; /* Point to the next descriptor */ port_info->rx_desc_cur++; if (port_info->rx_desc_cur >= port_info->rx_desc_base + NUM_RX_DESC) port_info->rx_desc_cur = port_info->rx_desc_base; } /* Restart the receiver if disabled */ if (!(inl(EDRRR(port)) & EDRRR_R)) outl(EDRRR_R, EDRRR(port)); return len; } #define EDMR_INIT_CNT 1000 static int sh_eth_reset(struct dev_info_s *dev) { int port = dev->port; int i; /* Start e-dmac transmitter and receiver */ outl(EDSR_ENALL, EDSR(port)); /* Perform a software reset and wait for it to complete */ outl(EDMR_SRST, EDMR(port)); for (i = 0; i < EDMR_INIT_CNT; i++) { if (!(inl(EDMR(port)) & EDMR_SRST)) break; udelay(1000); } if (i == EDMR_INIT_CNT) { printf("Error: Software reset timeout\n"); return -1; } return 0; } static int sh_eth_tx_desc_init(struct dev_info_s *dev) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; u32 tmp_addr; struct tx_desc_s *cur_tx_desc; int i; /* Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned */ if (!(port_info->tx_desc_malloc = malloc(NUM_TX_DESC * sizeof(struct tx_desc_s) + TX_DESC_SIZE - 1))) { printf("Error: malloc failed\n"); return -ENOMEM; } tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) & ~(TX_DESC_SIZE - 1)); /* Make sure we use a P2 address (non-cacheable) */ port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr); port_info->tx_desc_cur = port_info->tx_desc_base; /* Initialize all descriptors */ for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC; cur_tx_desc++, i++) { cur_tx_desc->td0 = 0x00; cur_tx_desc->td1 = 0x00; cur_tx_desc->td2 = 0x00; } /* Mark the end of the descriptors */ cur_tx_desc--; cur_tx_desc->td0 |= TD_TDLE; /* Point the controller to the tx descriptor list. Must use physical addresses */ outl(ADDR_TO_PHY(port_info->tx_desc_base), TDLAR(port)); outl(ADDR_TO_PHY(port_info->tx_desc_base), TDFAR(port)); outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port)); outl(0x01, TDFFR(port));/* Last discriptor bit */ return 0; } static int sh_eth_rx_desc_init(struct dev_info_s *dev) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; u32 tmp_addr; struct rx_desc_s *cur_rx_desc; u8 *rx_buf; int i; /* Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned */ if (!(port_info->rx_desc_malloc = malloc(NUM_RX_DESC * sizeof(struct rx_desc_s) + RX_DESC_SIZE - 1))) { printf("Error: malloc failed\n"); return -ENOMEM; } tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) & ~(RX_DESC_SIZE - 1)); /* Make sure we use a P2 address (non-cacheable) */ port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr); port_info->rx_desc_cur = port_info->rx_desc_base; /* Allocate rx data buffers. They must be 32 bytes aligned and in P2 area */ if (!(port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31))) { printf("Error: malloc failed\n"); free(port_info->rx_desc_malloc); port_info->rx_desc_malloc = NULL; return -ENOMEM; } tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) & ~(32 - 1)); port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); /* Initialize all descriptors */ for (cur_rx_desc = port_info->rx_desc_base, rx_buf = port_info->rx_buf_base, i = 0; i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) { cur_rx_desc->rd0 = RD_RACT; cur_rx_desc->rd1 = MAX_BUF_SIZE << 16; cur_rx_desc->rd2 = (u32) ADDR_TO_PHY(rx_buf); } /* Mark the end of the descriptors */ cur_rx_desc--; cur_rx_desc->rd0 |= RD_RDLE; /* Point the controller to the rx descriptor list */ outl(ADDR_TO_PHY(port_info->rx_desc_base), RDLAR(port)); outl(ADDR_TO_PHY(port_info->rx_desc_base), RDFAR(port)); outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port)); outl(RDFFR_RDLF, RDFFR(port)); return 0; } static void sh_eth_desc_free(struct dev_info_s *dev) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; if (port_info->tx_desc_malloc) { free(port_info->tx_desc_malloc); port_info->tx_desc_malloc = NULL; } if (port_info->rx_desc_malloc) { free(port_info->rx_desc_malloc); port_info->rx_desc_malloc = NULL; } if (port_info->rx_buf_malloc) { free(port_info->rx_buf_malloc); port_info->rx_buf_malloc = NULL; } } static int sh_eth_desc_init(struct dev_info_s *dev) { int rc; if ((rc = sh_eth_tx_desc_init(dev)) || (rc = sh_eth_rx_desc_init(dev))) { sh_eth_desc_free(dev); return rc; } return 0; } static int sh_eth_phy_config(struct dev_info_s *dev) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; int timeout; u32 val; /* Reset phy */ sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET); timeout = 10; while (timeout--) { val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, PHY_CTRL); if (!(val & PHY_C_RESET)) break; udelay(50000); } if (timeout < 0) { printf("%s phy reset timeout\n", __func__); return -1; } /* Advertise 100/10 baseT full/half duplex */ sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_ANA, (PHY_A_FDX|PHY_A_HDX|PHY_A_10FDX|PHY_A_10HDX|PHY_A_EXT)); /* Autonegotiation, normal operation, full duplex, enable tx */ sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL, (PHY_C_ANEGEN|PHY_C_RANEG)); /* Wait for autonegotiation to complete */ timeout = 100; while (timeout--) { val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1); if (val & PHY_S_ANEGC) break; udelay(50000); } if (timeout < 0) { printf("sh_eth_phy_config() phy auto-negotiation failed\n"); return -1; } return 0; } static int sh_eth_config(struct dev_info_s *dev, bd_t * bd) { int port = dev->port; struct port_info_s *port_info = &dev->port_info[port]; u32 val; u32 phy_status; int rc; /* Configure e-dmac registers */ outl((inl(EDMR(port)) & ~EMDR_DESC_R) | EDMR_EL, EDMR(port)); outl(0, EESIPR(port)); outl(0, TRSCER(port)); outl(0, TFTR(port)); outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port)); outl(RMCR_RST, RMCR(port)); outl(0, RPADIR(port)); outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port)); /* Configure e-mac registers */ outl(0, ECSIPR(port)); /* Set Mac address */ val = bd->bi_enetaddr[0] << 24 | bd->bi_enetaddr[1] << 16 | bd->bi_enetaddr[2] << 8 | bd->bi_enetaddr[3]; outl(val, MAHR(port)); val = bd->bi_enetaddr[4] << 8 | bd->bi_enetaddr[5]; outl(val, MALR(port)); outl(RFLR_RFL_MIN, RFLR(port)); outl(0, PIPR(port)); outl(APR_AP, APR(port)); outl(MPR_MP, MPR(port)); outl(TPAUSER_TPAUSE, TPAUSER(port)); /* Configure phy */ if ((rc = sh_eth_phy_config(dev))) return rc; /* Read phy status to finish configuring the e-mac */ phy_status = sh_eth_mii_read_phy_reg(dev->port, dev->port_info[dev->port].phy_addr, 1); /* Set the transfer speed */ if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) { printf("100Base/"); outl(GECMR_100B, GECMR(port)); } else { printf("10Base/"); outl(GECMR_10B, GECMR(port)); } /* Check if full duplex mode is supported by the phy */ if (phy_status & (PHY_S_100X_F|PHY_S_10T_F)) { printf("Full\n"); outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port)); } else { printf("Half\n"); outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port)); } return 0; } static int sh_eth_start(struct dev_info_s *dev) { /* * Enable the e-dmac receiver only. The transmitter will be enabled when * we have something to transmit */ outl(EDRRR_R, EDRRR(dev->port)); return 0; } static int sh_eth_get_mac(bd_t *bd) { char *s, *e; int i; s = getenv("ethaddr"); if (s != NULL) { for (i = 0; i < 6; ++i) { bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } } else { puts("Please set MAC address\n"); } return 0; } int eth_init(bd_t *bd) { int rc; /* Allocate main device information structure */ if (!(dev = malloc(sizeof(*dev)))) { printf("eth_init: malloc failed\n"); return -ENOMEM; } memset(dev, 0, sizeof(*dev)); dev->port = CONFIG_SH_ETHER_USE_PORT; dev->port_info[dev->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR; sh_eth_get_mac(bd); if ((rc = sh_eth_reset(dev)) || (rc = sh_eth_desc_init(dev))) goto err; if ((rc = sh_eth_config(dev, bd)) || (rc = sh_eth_start(dev))) goto err_desc; return 0; err_desc: sh_eth_desc_free(dev); err: free(dev); printf("eth_init: Failed\n"); return rc; }