/* * Teranetics PHY drivers * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * Copyright 2010-2011 Freescale Semiconductor, Inc. * author Andy Fleming * */ #include #include #ifndef CONFIG_PHYLIB_10G #error The Teranetics PHY needs 10G support #endif int tn2020_config(struct phy_device *phydev) { if (phydev->port == PORT_FIBRE) { unsigned short restart_an = (MDIO_AN_CTRL1_RESTART | MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_XNP); phy_write(phydev, 30, 93, 2); phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an); } return 0; } int tn2020_startup(struct phy_device *phydev) { if (phydev->port != PORT_FIBRE) return gen10g_startup(phydev); /* * The TN2020 only pretends to support fiber. * It works, but it doesn't look like it works, * so the link status reports no link. */ phydev->link = 1; /* For now just lie and say it's 10G all the time */ phydev->speed = SPEED_10000; phydev->duplex = DUPLEX_FULL; return 0; } struct phy_driver tn2020_driver = { .name = "Teranetics TN2020", .uid = 0x00a19410, .mask = 0xfffffff0, .features = PHY_10G_FEATURES, .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS | MDIO_DEVS_AN | MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2), .config = &tn2020_config, .startup = &tn2020_startup, .shutdown = &gen10g_shutdown, }; int phy_teranetics_init(void) { phy_register(&tn2020_driver); return 0; }