/* * (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de. * * This driver for AMD PCnet network controllers is derived from the * Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <malloc.h> #include <net.h> #include <netdev.h> #include <asm/io.h> #include <pci.h> #if 0 #define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */ #endif #if PCNET_DEBUG_LEVEL > 0 #define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args) #if PCNET_DEBUG_LEVEL > 1 #define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args) #else #define PCNET_DEBUG2(fmt,args...) #endif #else #define PCNET_DEBUG1(fmt,args...) #define PCNET_DEBUG2(fmt,args...) #endif #if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975) #error "Macro for PCnet chip version is not defined!" #endif /* * Set the number of Tx and Rx buffers, using Log_2(# buffers). * Reasonable default values are 4 Tx buffers, and 16 Rx buffers. * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). */ #define PCNET_LOG_TX_BUFFERS 0 #define PCNET_LOG_RX_BUFFERS 2 #define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS)) #define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12) #define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS)) #define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4) #define PKT_BUF_SZ 1544 /* The PCNET Rx and Tx ring descriptors. */ struct pcnet_rx_head { u32 base; s16 buf_length; s16 status; u32 msg_length; u32 reserved; }; struct pcnet_tx_head { u32 base; s16 length; s16 status; u32 misc; u32 reserved; }; /* The PCNET 32-Bit initialization block, described in databook. */ struct pcnet_init_block { u16 mode; u16 tlen_rlen; u8 phys_addr[6]; u16 reserved; u32 filter[2]; /* Receive and transmit ring base, along with extra bits. */ u32 rx_ring; u32 tx_ring; u32 reserved2; }; typedef struct pcnet_priv { struct pcnet_rx_head rx_ring[RX_RING_SIZE]; struct pcnet_tx_head tx_ring[TX_RING_SIZE]; struct pcnet_init_block init_block; /* Receive Buffer space */ unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4]; int cur_rx; int cur_tx; } pcnet_priv_t; static pcnet_priv_t *lp; /* Offsets from base I/O address for WIO mode */ #define PCNET_RDP 0x10 #define PCNET_RAP 0x12 #define PCNET_RESET 0x14 #define PCNET_BDP 0x16 static u16 pcnet_read_csr (struct eth_device *dev, int index) { outw (index, dev->iobase + PCNET_RAP); return inw (dev->iobase + PCNET_RDP); } static void pcnet_write_csr (struct eth_device *dev, int index, u16 val) { outw (index, dev->iobase + PCNET_RAP); outw (val, dev->iobase + PCNET_RDP); } static u16 pcnet_read_bcr (struct eth_device *dev, int index) { outw (index, dev->iobase + PCNET_RAP); return inw (dev->iobase + PCNET_BDP); } static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val) { outw (index, dev->iobase + PCNET_RAP); outw (val, dev->iobase + PCNET_BDP); } static void pcnet_reset (struct eth_device *dev) { inw (dev->iobase + PCNET_RESET); } static int pcnet_check (struct eth_device *dev) { outw (88, dev->iobase + PCNET_RAP); return (inw (dev->iobase + PCNET_RAP) == 88); } static int pcnet_init (struct eth_device *dev, bd_t * bis); static int pcnet_send (struct eth_device *dev, volatile void *packet, int length); static int pcnet_recv (struct eth_device *dev); static void pcnet_halt (struct eth_device *dev); static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_num); #define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a)) #define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a))) static struct pci_device_id supported[] = { {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE}, {} }; int pcnet_initialize (bd_t * bis) { pci_dev_t devbusfn; struct eth_device *dev; u16 command, status; int dev_nr = 0; PCNET_DEBUG1 ("\npcnet_initialize...\n"); for (dev_nr = 0;; dev_nr++) { /* * Find the PCnet PCI device(s). */ if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) { break; } /* * Allocate and pre-fill the device structure. */ dev = (struct eth_device *) malloc (sizeof *dev); dev->priv = (void *) devbusfn; sprintf (dev->name, "pcnet#%d", dev_nr); /* * Setup the PCI device. */ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, (unsigned int *) &dev->iobase); dev->iobase=pci_io_to_phys (devbusfn, dev->iobase); dev->iobase &= ~0xf; PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ", dev->name, devbusfn, dev->iobase); command = PCI_COMMAND_IO | PCI_COMMAND_MASTER; pci_write_config_word (devbusfn, PCI_COMMAND, command); pci_read_config_word (devbusfn, PCI_COMMAND, &status); if ((status & command) != command) { printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name); free (dev); continue; } pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40); /* * Probe the PCnet chip. */ if (pcnet_probe (dev, bis, dev_nr) < 0) { free (dev); continue; } /* * Setup device structure and register the driver. */ dev->init = pcnet_init; dev->halt = pcnet_halt; dev->send = pcnet_send; dev->recv = pcnet_recv; eth_register (dev); } udelay (10 * 1000); return dev_nr; } static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr) { int chip_version; char *chipname; #ifdef PCNET_HAS_PROM int i; #endif /* Reset the PCnet controller */ pcnet_reset (dev); /* Check if register access is working */ if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) { printf ("%s: CSR register access check failed\n", dev->name); return -1; } /* Identify the chip */ chip_version = pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16); if ((chip_version & 0xfff) != 0x003) return -1; chip_version = (chip_version >> 12) & 0xffff; switch (chip_version) { case 0x2621: chipname = "PCnet/PCI II 79C970A"; /* PCI */ break; #ifdef CONFIG_PCNET_79C973 case 0x2625: chipname = "PCnet/FAST III 79C973"; /* PCI */ break; #endif #ifdef CONFIG_PCNET_79C975 case 0x2627: chipname = "PCnet/FAST III 79C975"; /* PCI */ break; #endif default: printf ("%s: PCnet version %#x not supported\n", dev->name, chip_version); return -1; } PCNET_DEBUG1 ("AMD %s\n", chipname); #ifdef PCNET_HAS_PROM /* * In most chips, after a chip reset, the ethernet address is read from * the station address PROM at the base address and programmed into the * "Physical Address Registers" CSR12-14. */ for (i = 0; i < 3; i++) { unsigned int val; val = pcnet_read_csr (dev, i + 12) & 0x0ffff; /* There may be endianness issues here. */ dev->enetaddr[2 * i] = val & 0x0ff; dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff; } #endif /* PCNET_HAS_PROM */ return 0; } static int pcnet_init (struct eth_device *dev, bd_t * bis) { int i, val; u32 addr; PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name); /* Switch pcnet to 32bit mode */ pcnet_write_bcr (dev, 20, 2); #ifdef CONFIG_PN62 /* Setup LED registers */ val = pcnet_read_bcr (dev, 2) | 0x1000; pcnet_write_bcr (dev, 2, val); /* enable LEDPE */ pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */ pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */ pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */ pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */ #endif /* Set/reset autoselect bit */ val = pcnet_read_bcr (dev, 2) & ~2; val |= 2; pcnet_write_bcr (dev, 2, val); /* Enable auto negotiate, setup, disable fd */ val = pcnet_read_bcr (dev, 32) & ~0x98; val |= 0x20; pcnet_write_bcr (dev, 32, val); /* * We only maintain one structure because the drivers will never * be used concurrently. In 32bit mode the RX and TX ring entries * must be aligned on 16-byte boundaries. */ if (lp == NULL) { addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10); addr = (addr + 0xf) & ~0xf; lp = (pcnet_priv_t *) addr; } lp->init_block.mode = cpu_to_le16 (0x0000); lp->init_block.filter[0] = 0x00000000; lp->init_block.filter[1] = 0x00000000; /* * Initialize the Rx ring. */ lp->cur_rx = 0; for (i = 0; i < RX_RING_SIZE; i++) { lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]); lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ); lp->rx_ring[i].status = cpu_to_le16 (0x8000); PCNET_DEBUG1 ("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length, lp->rx_ring[i].status); } /* * Initialize the Tx ring. The Tx buffer address is filled in as * needed, but we do need to clear the upper ownership bit. */ lp->cur_tx = 0; for (i = 0; i < TX_RING_SIZE; i++) { lp->tx_ring[i].base = 0; lp->tx_ring[i].status = 0; } /* * Setup Init Block. */ PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block); for (i = 0; i < 6; i++) { lp->init_block.phys_addr[i] = dev->enetaddr[i]; PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]); } lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS | RX_RING_LEN_BITS); lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring); lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring); PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", lp->init_block.tlen_rlen, lp->init_block.rx_ring, lp->init_block.tx_ring); /* * Tell the controller where the Init Block is located. */ addr = PCI_TO_MEM (dev, &lp->init_block); pcnet_write_csr (dev, 1, addr & 0xffff); pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff); pcnet_write_csr (dev, 4, 0x0915); pcnet_write_csr (dev, 0, 0x0001); /* start */ /* Wait for Init Done bit */ for (i = 10000; i > 0; i--) { if (pcnet_read_csr (dev, 0) & 0x0100) break; udelay (10); } if (i <= 0) { printf ("%s: TIMEOUT: controller init failed\n", dev->name); pcnet_reset (dev); return -1; } /* * Finally start network controller operation. */ pcnet_write_csr (dev, 0, 0x0002); return 0; } static int pcnet_send (struct eth_device *dev, volatile void *packet, int pkt_len) { int i, status; struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx]; PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet); /* Wait for completion by testing the OWN bit */ for (i = 1000; i > 0; i--) { status = le16_to_cpu (entry->status); if ((status & 0x8000) == 0) break; udelay (100); PCNET_DEBUG2 ("."); } if (i <= 0) { printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n", dev->name, lp->cur_tx, status); pkt_len = 0; goto failure; } /* * Setup Tx ring. Caution: the write order is important here, * set the status with the "ownership" bits last. */ status = 0x8300; entry->length = le16_to_cpu (-pkt_len); entry->misc = 0x00000000; entry->base = PCI_TO_MEM_LE (dev, packet); entry->status = le16_to_cpu (status); /* Trigger an immediate send poll. */ pcnet_write_csr (dev, 0, 0x0008); failure: if (++lp->cur_tx >= TX_RING_SIZE) lp->cur_tx = 0; PCNET_DEBUG2 ("done\n"); return pkt_len; } static int pcnet_recv (struct eth_device *dev) { struct pcnet_rx_head *entry; int pkt_len = 0; u16 status; while (1) { entry = &lp->rx_ring[lp->cur_rx]; /* * If we own the next entry, it's a new packet. Send it up. */ if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) { break; } status >>= 8; if (status != 0x03) { /* There was an error. */ printf ("%s: Rx%d", dev->name, lp->cur_rx); PCNET_DEBUG1 (" (status=0x%x)", status); if (status & 0x20) printf (" Frame"); if (status & 0x10) printf (" Overflow"); if (status & 0x08) printf (" CRC"); if (status & 0x04) printf (" Fifo"); printf (" Error\n"); entry->status &= le16_to_cpu (0x03ff); } else { pkt_len = (le32_to_cpu (entry->msg_length) & 0xfff) - 4; if (pkt_len < 60) { printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len); } else { NetReceive (lp->rx_buf[lp->cur_rx], pkt_len); PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n", lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]); } } entry->status |= cpu_to_le16 (0x8000); if (++lp->cur_rx >= RX_RING_SIZE) lp->cur_rx = 0; } return pkt_len; } static void pcnet_halt (struct eth_device *dev) { int i; PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name); /* Reset the PCnet controller */ pcnet_reset (dev); /* Wait for Stop bit */ for (i = 1000; i > 0; i--) { if (pcnet_read_csr (dev, 0) & 0x4) break; udelay (10); } if (i <= 0) { printf ("%s: TIMEOUT: controller reset failed\n", dev->name); } }