/* * (C) Copyright 2003-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Derived from the MPC8xx FEC driver. * Adapted for MPC512x by Grzegorz Bernacki <gjb@semihalf.com> */ #include <common.h> #include <malloc.h> #include <net.h> #include <netdev.h> #include <miiphy.h> #include <asm/io.h> #include "mpc512x_fec.h" DECLARE_GLOBAL_DATA_PTR; #define DEBUG 0 #if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ defined(CONFIG_MPC512x_FEC) #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) #error "CONFIG_MII has to be defined!" #endif int fec512x_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal); int fec512x_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data); int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); static uchar rx_buff[FEC_BUFFER_SIZE]; static int rx_buff_idx = 0; /********************************************************************/ #if (DEBUG & 0x2) static void mpc512x_fec_phydump (char *devname) { u16 phyStatus, i; u8 phyAddr = CONFIG_PHY_ADDR; u8 reg_mask[] = { /* regs to print: 0...8, 21,27,31 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, }; for (i = 0; i < 32; i++) { if (reg_mask[i]) { miiphy_read (devname, phyAddr, i, &phyStatus); printf ("Mii reg %d: 0x%04x\n", i, phyStatus); } } } #endif /********************************************************************/ static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) { int ix; /* * Receive BDs init */ for (ix = 0; ix < FEC_RBD_NUM; ix++) { fec->bdBase->rbd[ix].dataPointer = (u32)&fec->bdBase->recv_frames[ix]; fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; fec->bdBase->rbd[ix].dataLength = 0; } /* * have the last RBD to close the ring */ fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP; fec->rbdIndex = 0; /* * Trasmit BDs init */ for (ix = 0; ix < FEC_TBD_NUM; ix++) { fec->bdBase->tbd[ix].status = 0; } /* * Have the last TBD to close the ring */ fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP; /* * Initialize some indices */ fec->tbdIndex = 0; fec->usedTbdIndex = 0; fec->cleanTbdNum = FEC_TBD_NUM; return 0; } /********************************************************************/ static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd) { /* * Reset buffer descriptor as empty */ if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); else pRbd->status = FEC_RBD_EMPTY; pRbd->dataLength = 0; /* * Increment BD count */ fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; /* * Now, we have an empty RxBD, notify FEC * Set Descriptor polling active */ out_be32(&fec->eth->r_des_active, 0x01000000); } /********************************************************************/ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) { volatile FEC_TBD *pUsedTbd; #if (DEBUG & 0x1) printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", fec->cleanTbdNum, fec->usedTbdIndex); #endif /* * process all the consumed TBDs */ while (fec->cleanTbdNum < FEC_TBD_NUM) { pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex]; if (pUsedTbd->status & FEC_TBD_READY) { #if (DEBUG & 0x20) printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex); #endif return; } /* * clean this buffer descriptor */ if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) pUsedTbd->status = FEC_TBD_WRAP; else pUsedTbd->status = 0; /* * update some indeces for a correct handling of the TBD ring */ fec->cleanTbdNum++; fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; } } /********************************************************************/ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, unsigned char *mac) { u8 currByte; /* byte for which to compute the CRC */ int byte; /* loop - counter */ int bit; /* loop - counter */ u32 crc = 0xffffffff; /* initial value */ /* * The algorithm used is the following: * we loop on each of the six bytes of the provided address, * and we compute the CRC by left-shifting the previous * value by one position, so that each bit in the current * byte of the address may contribute the calculation. If * the latter and the MSB in the CRC are different, then * the CRC value so computed is also ex-ored with the * "polynomium generator". The current byte of the address * is also shifted right by one bit at each iteration. * This is because the CRC generatore in hardware is implemented * as a shift-register with as many ex-ores as the radixes * in the polynomium. This suggests that we represent the * polynomiumm itself as a 32-bit constant. */ for (byte = 0; byte < 6; byte++) { currByte = mac[byte]; for (bit = 0; bit < 8; bit++) { if ((currByte & 0x01) ^ (crc & 0x01)) { crc >>= 1; crc = crc ^ 0xedb88320; } else { crc >>= 1; } currByte >>= 1; } } crc = crc >> 26; /* * Set individual hash table register */ if (crc >= 32) { out_be32(&fec->eth->iaddr1, (1 << (crc - 32))); out_be32(&fec->eth->iaddr2, 0); } else { out_be32(&fec->eth->iaddr1, 0); out_be32(&fec->eth->iaddr2, (1 << crc)); } /* * Set physical address */ out_be32(&fec->eth->paddr1, (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]); out_be32(&fec->eth->paddr2, (mac[4] << 24) + (mac[5] << 16) + 0x8808); } /********************************************************************/ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) { mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; #if (DEBUG & 0x1) printf ("mpc512x_fec_init... Begin\n"); #endif mpc512x_fec_set_hwaddr (fec, dev->enetaddr); out_be32(&fec->eth->gaddr1, 0x00000000); out_be32(&fec->eth->gaddr2, 0x00000000); mpc512x_fec_init_phy (dev, bis); /* Set interrupt mask register */ out_be32(&fec->eth->imask, 0x00000000); /* Clear FEC-Lite interrupt event register(IEVENT) */ out_be32(&fec->eth->ievent, 0xffffffff); /* Set transmit fifo watermark register(X_WMRK), default = 64 */ out_be32(&fec->eth->x_wmrk, 0x0); /* Set Opcode/Pause Duration Register */ out_be32(&fec->eth->op_pause, 0x00010020); /* Frame length=1522; MII mode */ out_be32(&fec->eth->r_cntrl, (FEC_MAX_FRAME_LEN << 16) | 0x24); /* Half-duplex, heartbeat disabled */ out_be32(&fec->eth->x_cntrl, 0x00000000); /* Enable MIB counters */ out_be32(&fec->eth->mib_control, 0x0); /* Setup recv fifo start and buff size */ out_be32(&fec->eth->r_fstart, 0x500); out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE); /* Setup BD base addresses */ out_be32(&fec->eth->r_des_start, (u32)fec->bdBase->rbd); out_be32(&fec->eth->x_des_start, (u32)fec->bdBase->tbd); /* DMA Control */ out_be32(&fec->eth->dma_control, 0xc0000000); /* Enable FEC */ setbits_be32(&fec->eth->ecntrl, 0x00000006); /* Initilize addresses and status words of BDs */ mpc512x_fec_bd_init (fec); /* Descriptor polling active */ out_be32(&fec->eth->r_des_active, 0x01000000); #if (DEBUG & 0x1) printf("mpc512x_fec_init... Done \n"); #endif return 1; } /********************************************************************/ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) { mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ int timeout = 1; u16 phyStatus; #if (DEBUG & 0x1) printf ("mpc512x_fec_init_phy... Begin\n"); #endif /* * Clear FEC-Lite interrupt event register(IEVENT) */ out_be32(&fec->eth->ievent, 0xffffffff); /* * Set interrupt mask register */ out_be32(&fec->eth->imask, 0x00000000); if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ out_be32(&fec->eth->mii_speed, (((gd->ips_clk / 1000000) / 5) + 1) << 1); /* * Reset PHY, then delay 300ns */ miiphy_write (dev->name, phyAddr, 0x0, 0x8000); udelay (1000); if (fec->xcv_type == MII10) { /* * Force 10Base-T, FDX operation */ #if (DEBUG & 0x2) printf ("Forcing 10 Mbps ethernet link... "); #endif miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); miiphy_write (dev->name, phyAddr, 0x0, 0x0180); timeout = 20; do { /* wait for link status to go down */ udelay (10000); if ((timeout--) == 0) { #if (DEBUG & 0x2) printf ("hmmm, should not have waited..."); #endif break; } miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); #if (DEBUG & 0x2) printf ("="); #endif } while ((phyStatus & 0x0004)); /* !link up */ timeout = 1000; do { /* wait for link status to come back up */ udelay (10000); if ((timeout--) == 0) { printf ("failed. Link is down.\n"); break; } miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); #if (DEBUG & 0x2) printf ("+"); #endif } while (!(phyStatus & 0x0004)); /* !link up */ #if (DEBUG & 0x2) printf ("done.\n"); #endif } else { /* MII100 */ /* * Set the auto-negotiation advertisement register bits */ miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); /* * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation */ miiphy_write (dev->name, phyAddr, 0x0, 0x1200); /* * Wait for AN completion */ timeout = 2500; do { udelay (1000); if ((timeout--) == 0) { #if (DEBUG & 0x2) printf ("PHY auto neg 0 failed...\n"); #endif return -1; } if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { #if (DEBUG & 0x2) printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); #endif return -1; } } while (!(phyStatus & 0x0004)); #if (DEBUG & 0x2) printf ("PHY auto neg complete! \n"); #endif } } #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) mpc512x_fec_phydump (dev->name); #endif #if (DEBUG & 0x1) printf ("mpc512x_fec_init_phy... Done \n"); #endif return 1; } /********************************************************************/ static void mpc512x_fec_halt (struct eth_device *dev) { mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; int counter = 0xffff; #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) mpc512x_fec_phydump (dev->name); #endif /* * mask FEC chip interrupts */ out_be32(&fec->eth->imask, 0); /* * issue graceful stop command to the FEC transmitter if necessary */ setbits_be32(&fec->eth->x_cntrl, 0x00000001); /* * wait for graceful stop to register */ while ((counter--) && (!(in_be32(&fec->eth->ievent) & 0x10000000))) ; /* * Disable the Ethernet Controller */ clrbits_be32(&fec->eth->ecntrl, 0x00000002); /* * Issue a reset command to the FEC chip */ setbits_be32(&fec->eth->ecntrl, 0x1); /* * wait at least 16 clock cycles */ udelay (10); #if (DEBUG & 0x3) printf ("Ethernet task stopped\n"); #endif } /********************************************************************/ static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, int data_length) { /* * This routine transmits one frame. This routine only accepts * 6-byte Ethernet addresses. */ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; volatile FEC_TBD *pTbd; #if (DEBUG & 0x20) printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status); #endif /* * Clear Tx BD ring at first */ mpc512x_fec_tbd_scrub (fec); /* * Check for valid length of data. */ if ((data_length > 1500) || (data_length <= 0)) { return -1; } /* * Check the number of vacant TxBDs. */ if (fec->cleanTbdNum < 1) { #if (DEBUG & 0x20) printf ("No available TxBDs ...\n"); #endif return -1; } /* * Get the first TxBD to send the mac header */ pTbd = &fec->bdBase->tbd[fec->tbdIndex]; pTbd->dataLength = data_length; pTbd->dataPointer = (u32)eth_data; pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; /* Activate transmit Buffer Descriptor polling */ out_be32(&fec->eth->x_des_active, 0x01000000); #if (DEBUG & 0x8) printf ( "+" ); #endif fec->cleanTbdNum -= 1; /* * wait until frame is sent . */ while (pTbd->status & FEC_TBD_READY) { udelay (10); #if (DEBUG & 0x8) printf ("TDB status = %04x\n", pTbd->status); #endif } return 0; } /********************************************************************/ static int mpc512x_fec_recv (struct eth_device *dev) { /* * This command pulls one frame from the card */ mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; unsigned long ievent; int frame_length = 0; #if (DEBUG & 0x1) printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); #endif #if (DEBUG & 0x8) printf( "-" ); #endif /* * Check if any critical events have happened */ ievent = in_be32(&fec->eth->ievent); out_be32(&fec->eth->ievent, ievent); if (ievent & 0x20060000) { /* BABT, Rx/Tx FIFO errors */ mpc512x_fec_halt (dev); mpc512x_fec_init (dev, NULL); return 0; } if (ievent & 0x80000000) { /* Heartbeat error */ setbits_be32(&fec->eth->x_cntrl, 0x00000001); } if (ievent & 0x10000000) { /* Graceful stop complete */ if (in_be32(&fec->eth->x_cntrl) & 0x00000001) { mpc512x_fec_halt (dev); clrbits_be32(&fec->eth->x_cntrl, 0x00000001);; mpc512x_fec_init (dev, NULL); } } if (!(pRbd->status & FEC_RBD_EMPTY)) { if (!(pRbd->status & FEC_RBD_ERR) && ((pRbd->dataLength - 4) > 14)) { /* * Get buffer size */ if (pRbd->status & FEC_RBD_LAST) frame_length = pRbd->dataLength - 4; else frame_length = pRbd->dataLength; #if (DEBUG & 0x20) { int i; printf ("recv data length 0x%08x data hdr: ", pRbd->dataLength); for (i = 0; i < 14; i++) printf ("%x ", *((u8*)pRbd->dataPointer + i)); printf("\n"); } #endif /* * Fill the buffer and pass it to upper layers */ memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer, frame_length - rx_buff_idx); rx_buff_idx = frame_length; if (pRbd->status & FEC_RBD_LAST) { NetReceive ((uchar*)rx_buff, frame_length); rx_buff_idx = 0; } } /* * Reset buffer descriptor as empty */ mpc512x_fec_rbd_clean (fec, pRbd); } /* Try to fill Buffer Descriptors */ out_be32(&fec->eth->r_des_active, 0x01000000); return frame_length; } /********************************************************************/ int mpc512x_fec_initialize (bd_t * bis) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; mpc512x_fec_priv *fec; struct eth_device *dev; void * bd; fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); dev = (struct eth_device *) malloc (sizeof(*dev)); memset (dev, 0, sizeof *dev); fec->eth = &im->fec; # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else fec->xcv_type = MII10; # endif dev->priv = (void *)fec; dev->iobase = (int)&im->fec; dev->init = mpc512x_fec_init; dev->halt = mpc512x_fec_halt; dev->send = mpc512x_fec_send; dev->recv = mpc512x_fec_recv; sprintf (dev->name, "FEC ETHERNET"); eth_register (dev); #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register (dev->name, fec512x_miiphy_read, fec512x_miiphy_write); #endif /* Clean up space FEC's MIB and FIFO RAM ...*/ memset ((void *)&im->fec.mib, 0x00, sizeof(im->fec.mib)); memset ((void *)&im->fec.fifo, 0x00, sizeof(im->fec.fifo)); /* * Malloc space for BDs (must be quad word-aligned) * this pointer is lost, so cannot be freed */ bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); fec->bdBase = (mpc512x_buff_descs*)((u32)bd & 0xfffffff0); memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); /* * Set interrupt mask register */ out_be32(&fec->eth->imask, 0x00000000); /* * Clear FEC-Lite interrupt event register(IEVENT) */ out_be32(&fec->eth->ievent, 0xffffffff); return 1; } /* MII-interface related functions */ /********************************************************************/ int fec512x_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile fec512x_t *eth = &im->fec; u32 reg; /* convenient holder for the PHY register */ u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; /* * reading from any PHY's register is done by properly * programming the FEC's MII data register. */ reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; out_be32(ð->mii_data, FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); /* * wait for the related interrupt */ while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) ; if (timeout == 0) { #if (DEBUG & 0x2) printf ("Read MDIO failed...\n"); #endif return -1; } /* * clear mii interrupt bit */ out_be32(ð->ievent, 0x00800000); /* * it's now safe to read the PHY's register */ *retVal = (u16) in_be32(ð->mii_data); return 0; } /********************************************************************/ int fec512x_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile fec512x_t *eth = &im->fec; u32 reg; /* convenient holder for the PHY register */ u32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; out_be32(ð->mii_data, FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | FEC_MII_DATA_TA | phy | reg | data); /* * wait for the MII interrupt */ while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) ; if (timeout == 0) { #if (DEBUG & 0x2) printf ("Write MDIO failed...\n"); #endif return -1; } /* * clear MII interrupt bit */ out_be32(ð->ievent, 0x00800000); return 0; } #endif /* CONFIG_MPC512x_FEC */