/*------------------------------------------------------------------------ * lan91c96.c * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based * on the SMC91111 driver from U-boot. * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Rolf Offermanns <rof@sysgo.de> * * Copyright (C) 2001 Standard Microsystems Corporation (SMSC) * Developed by Simple Network Magic Corporation (SNMC) * Copyright (C) 1996 by Erik Stahlman (ES) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Information contained in this file was obtained from the LAN91C96 * manual from SMC. To get a copy, if you really want one, you can find * information under www.smsc.com. * * * "Features" of the SMC chip: * 6144 byte packet memory. ( for the 91C96 ) * EEPROM for configuration * AUI/TP selection ( mine has 10Base2/10BaseT select ) * * Arguments: * io = for the base address * irq = for the IRQ * * author: * Erik Stahlman ( erik@vt.edu ) * Daris A Nevil ( dnevil@snmc.com ) * * * Hardware multicast code from Peter Cammaert ( pc@denkart.be ) * * Sources: * o SMSC LAN91C96 databook (www.smsc.com) * o smc91111.c (u-boot driver) * o smc9194.c (linux kernel driver) * o lan91c96.c (Intel Diagnostic Manager driver) * * History: * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version) * for lan91c96 *--------------------------------------------------------------------------- */ #include <common.h> #include <command.h> #include "lan91c96.h" #include <net.h> /*------------------------------------------------------------------------ * * Configuration options, for the experienced user to change. * -------------------------------------------------------------------------*/ /* Use power-down feature of the chip */ #define POWER_DOWN 0 /* * Wait time for memory to be free. This probably shouldn't be * tuned that much, as waiting for this means nothing else happens * in the system */ #define MEMORY_WAIT_TIME 16 #define SMC_DEBUG 0 #if (SMC_DEBUG > 2 ) #define PRINTK3(args...) printf(args) #else #define PRINTK3(args...) #endif #if SMC_DEBUG > 1 #define PRINTK2(args...) printf(args) #else #define PRINTK2(args...) #endif #ifdef SMC_DEBUG #define PRINTK(args...) printf(args) #else #define PRINTK(args...) #endif /*------------------------------------------------------------------------ * * The internal workings of the driver. If you are changing anything * here with the SMC stuff, you should have the datasheet and know * what you are doing. * *------------------------------------------------------------------------ */ #define CARDNAME "LAN91C96" #define SMC_BASE_ADDRESS CONFIG_LAN91C96_BASE #define SMC_DEV_NAME "LAN91C96" #define SMC_ALLOC_MAX_TRY 5 #define SMC_TX_TIMEOUT 30 #define ETH_ZLEN 60 #ifdef CONFIG_LAN91C96_USE_32_BIT #define USE_32_BIT 1 #else #undef USE_32_BIT #endif /*----------------------------------------------------------------- * * The driver can be entered at any of the following entry points. * *----------------------------------------------------------------- */ extern int eth_init (bd_t * bd); extern void eth_halt (void); extern int eth_rx (void); extern int eth_send (volatile void *packet, int length); #if 0 static int smc_hw_init (void); #endif /* * This is called by register_netdev(). It is responsible for * checking the portlist for the SMC9000 series chipset. If it finds * one, then it will initialize the device, find the hardware information, * and sets up the appropriate device parameters. * NOTE: Interrupts are *OFF* when this procedure is called. * * NB:This shouldn't be static since it is referred to externally. */ int smc_init (void); /* * This is called by unregister_netdev(). It is responsible for * cleaning up before the driver is finally unregistered and discarded. */ void smc_destructor (void); /* * The kernel calls this function when someone wants to use the device, * typically 'ifconfig ethX up'. */ static int smc_open (bd_t *bd); /* * This is called by the kernel in response to 'ifconfig ethX down'. It * is responsible for cleaning up everything that the open routine * does, and maybe putting the card into a powerdown state. */ static int smc_close (void); /* * This is a separate procedure to handle the receipt of a packet, to * leave the interrupt code looking slightly cleaner */ static int smc_rcv (void); /* See if a MAC address is defined in the current environment. If so use it. If not . print a warning and set the environment and other globals with the default. . If an EEPROM is present it really should be consulted. */ int smc_get_ethaddr(bd_t *bd); int get_rom_mac(unsigned char *v_rom_mac); /* ------------------------------------------------------------ * Internal routines * ------------------------------------------------------------ */ static unsigned char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c }; /* * This function must be called before smc_open() if you want to override * the default mac address. */ void smc_set_mac_addr (const unsigned char *addr) { int i; for (i = 0; i < sizeof (smc_mac_addr); i++) { smc_mac_addr[i] = addr[i]; } } /* * smc_get_macaddr is no longer used. If you want to override the default * mac address, call smc_get_mac_addr as a part of the board initialisation. */ #if 0 void smc_get_macaddr (byte * addr) { /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010); int i; for (i = 0; i < 6; i++) { addr[0] = *(dnp1110_mac + 0); addr[1] = *(dnp1110_mac + 1); addr[2] = *(dnp1110_mac + 2); addr[3] = *(dnp1110_mac + 3); addr[4] = *(dnp1110_mac + 4); addr[5] = *(dnp1110_mac + 5); } } #endif /* 0 */ /*********************************************** * Show available memory * ***********************************************/ void dump_memory_info (void) { word mem_info; word old_bank; old_bank = SMC_inw (LAN91C96_BANK_SELECT) & 0xF; SMC_SELECT_BANK (0); mem_info = SMC_inw (LAN91C96_MIR); PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048); SMC_SELECT_BANK (old_bank); } /* * A rather simple routine to print out a packet for debugging purposes. */ #if SMC_DEBUG > 2 static void print_packet (byte *, int); #endif /* #define tx_done(dev) 1 */ /* this does a soft reset on the device */ static void smc_reset (void); /* Enable Interrupts, Receive, and Transmit */ static void smc_enable (void); /* this puts the device in an inactive state */ static void smc_shutdown (void); static int poll4int (byte mask, int timeout) { int tmo = get_timer (0) + timeout * CFG_HZ; int is_timeout = 0; word old_bank = SMC_inw (LAN91C96_BANK_SELECT); PRINTK2 ("Polling...\n"); SMC_SELECT_BANK (2); while ((SMC_inw (LAN91C96_INT_STATS) & mask) == 0) { if (get_timer (0) >= tmo) { is_timeout = 1; break; } } /* restore old bank selection */ SMC_SELECT_BANK (old_bank); if (is_timeout) return 1; else return 0; } /* * Function: smc_reset( void ) * Purpose: * This sets the SMC91111 chip to its normal state, hopefully from whatever * mess that any other DOS driver has put it in. * * Maybe I should reset more registers to defaults in here? SOFTRST should * do that for me. * * Method: * 1. send a SOFT RESET * 2. wait for it to finish * 3. enable autorelease mode * 4. reset the memory management unit * 5. clear all interrupts * */ static void smc_reset (void) { PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME); /* This resets the registers mostly to defaults, but doesn't affect EEPROM. That seems unnecessary */ SMC_SELECT_BANK (0); SMC_outw (LAN91C96_RCR_SOFT_RST, LAN91C96_RCR); udelay (10); /* Disable transmit and receive functionality */ SMC_outw (0, LAN91C96_RCR); SMC_outw (0, LAN91C96_TCR); /* set the control register */ SMC_SELECT_BANK (1); SMC_outw (SMC_inw (LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8, LAN91C96_CONTROL); /* Disable all interrupts */ SMC_outb (0, LAN91C96_INT_MASK); } /* * Function: smc_enable * Purpose: let the chip talk to the outside work * Method: * 1. Initialize the Memory Configuration Register * 2. Enable the transmitter * 3. Enable the receiver */ static void smc_enable () { PRINTK2 ("%s:smc_enable\n", SMC_DEV_NAME); SMC_SELECT_BANK (0); /* Initialize the Memory Configuration Register. See page 49 of the LAN91C96 data sheet for details. */ SMC_outw (LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR); /* Initialize the Transmit Control Register */ SMC_outw (LAN91C96_TCR_TXENA, LAN91C96_TCR); /* Initialize the Receive Control Register * FIXME: * The promiscuous bit set because I could not receive ARP reply * packets from the server when I send a ARP request. It only works * when I set the promiscuous bit */ SMC_outw (LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR); } /* * Function: smc_shutdown * Purpose: closes down the SMC91xxx chip. * Method: * 1. zero the interrupt mask * 2. clear the enable receive flag * 3. clear the enable xmit flags * * TODO: * (1) maybe utilize power down mode. * Why not yet? Because while the chip will go into power down mode, * the manual says that it will wake up in response to any I/O requests * in the register space. Empirical results do not show this working. */ static void smc_shutdown () { PRINTK2 (CARDNAME ":smc_shutdown\n"); /* no more interrupts for me */ SMC_SELECT_BANK (2); SMC_outb (0, LAN91C96_INT_MASK); /* and tell the card to stay away from that nasty outside world */ SMC_SELECT_BANK (0); SMC_outb (0, LAN91C96_RCR); SMC_outb (0, LAN91C96_TCR); } /* * Function: smc_hardware_send_packet(struct net_device * ) * Purpose: * This sends the actual packet to the SMC9xxx chip. * * Algorithm: * First, see if a saved_skb is available. * ( this should NOT be called if there is no 'saved_skb' * Now, find the packet number that the chip allocated * Point the data pointers at it in memory * Set the length word in the chip's memory * Dump the packet to chip memory * Check if a last byte is needed ( odd length packet ) * if so, set the control flag right * Tell the card to send it * Enable the transmit interrupt, so I know if it failed * Free the kernel data if I actually sent it. */ static int smc_send_packet (volatile void *packet, int packet_length) { byte packet_no; unsigned long ioaddr; byte *buf; int length; int numPages; int try = 0; int time_out; byte status; PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME); length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN; /* allocate memory ** The MMU wants the number of pages to be the number of 256 bytes ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) ) ** ** The 91C111 ignores the size bits, but the code is left intact ** for backwards and future compatibility. ** ** Pkt size for allocating is data length +6 (for additional status ** words, length and ctl!) ** ** If odd size then last byte is included in this header. */ numPages = ((length & 0xfffe) + 6); numPages >>= 8; /* Divide by 256 */ if (numPages > 7) { printf ("%s: Far too big packet error. \n", SMC_DEV_NAME); return 0; } /* now, try to allocate the memory */ SMC_SELECT_BANK (2); SMC_outw (LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU); again: try++; time_out = MEMORY_WAIT_TIME; do { status = SMC_inb (LAN91C96_INT_STATS); if (status & LAN91C96_IST_ALLOC_INT) { SMC_outb (LAN91C96_IST_ALLOC_INT, LAN91C96_INT_STATS); break; } } while (--time_out); if (!time_out) { PRINTK2 ("%s: memory allocation, try %d failed ...\n", SMC_DEV_NAME, try); if (try < SMC_ALLOC_MAX_TRY) goto again; else return 0; } PRINTK2 ("%s: memory allocation, try %d succeeded ...\n", SMC_DEV_NAME, try); /* I can send the packet now.. */ ioaddr = SMC_BASE_ADDRESS; buf = (byte *) packet; /* If I get here, I _know_ there is a packet slot waiting for me */ packet_no = SMC_inb (LAN91C96_ARR); if (packet_no & LAN91C96_ARR_FAILED) { /* or isn't there? BAD CHIP! */ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME); return 0; } /* we have a packet address, so tell the card to use it */ SMC_outb (packet_no, LAN91C96_PNR); /* point to the beginning of the packet */ SMC_outw (LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER); PRINTK3 ("%s: Trying to xmit packet of length %x\n", SMC_DEV_NAME, length); #if SMC_DEBUG > 2 printf ("Transmitting Packet\n"); print_packet (buf, length); #endif /* send the packet length ( +6 for status, length and ctl byte ) and the status word ( set to zeros ) */ #ifdef USE_32_BIT SMC_outl ((length + 6) << 16, LAN91C96_DATA_HIGH); #else SMC_outw (0, LAN91C96_DATA_HIGH); /* send the packet length ( +6 for status words, length, and ctl */ SMC_outw ((length + 6), LAN91C96_DATA_HIGH); #endif /* USE_32_BIT */ /* send the actual data * I _think_ it's faster to send the longs first, and then * mop up by sending the last word. It depends heavily * on alignment, at least on the 486. Maybe it would be * a good idea to check which is optimal? But that could take * almost as much time as is saved? */ #ifdef USE_32_BIT SMC_outsl (LAN91C96_DATA_HIGH, buf, length >> 2); if (length & 0x2) SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))), LAN91C96_DATA_HIGH); #else SMC_outsw (LAN91C96_DATA_HIGH, buf, (length) >> 1); #endif /* USE_32_BIT */ /* Send the last byte, if there is one. */ if ((length & 1) == 0) { SMC_outw (0, LAN91C96_DATA_HIGH); } else { SMC_outw (buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH); } /* and let the chipset deal with it */ SMC_outw (LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU); /* poll for TX INT */ if (poll4int (LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) { /* sending failed */ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME); /* release packet */ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); /* wait for MMU getting ready (low) */ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) { udelay (10); } PRINTK2 ("MMU ready\n"); return 0; } else { /* ack. int */ SMC_outw (LAN91C96_IST_TX_INT, LAN91C96_INT_STATS); PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length); /* release packet */ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); /* wait for MMU getting ready (low) */ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) { udelay (10); } PRINTK2 ("MMU ready\n"); } return length; } /*------------------------------------------------------------------------- * smc_destructor( struct net_device * dev ) * Input parameters: * dev, pointer to the device structure * * Output: * None. *-------------------------------------------------------------------------- */ void smc_destructor () { PRINTK2 (CARDNAME ":smc_destructor\n"); } /* * Open and Initialize the board * * Set up everything, reset the card, etc .. * */ static int smc_open (bd_t *bd) { int i, err; /* used to set hw ethernet address */ PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME); /* reset the hardware */ smc_reset (); smc_enable (); SMC_SELECT_BANK (1); err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */ if (err < 0) { memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */ return (-1); /* upper code ignores this, but NOT bi_enetaddr */ } #ifdef USE_32_BIT for (i = 0; i < 6; i += 2) { word address; address = smc_mac_addr[i + 1] << 8; address |= smc_mac_addr[i]; SMC_outw (address, LAN91C96_IA0 + i); } #else for (i = 0; i < 6; i++) SMC_outb (smc_mac_addr[i], LAN91C96_IA0 + i); #endif return 0; } /*------------------------------------------------------------- * * smc_rcv - receive a packet from the card * * There is ( at least ) a packet waiting to be read from * chip-memory. * * o Read the status * o If an error, record it * o otherwise, read in the packet *------------------------------------------------------------- */ static int smc_rcv () { int packet_number; word status; word packet_length; int is_error = 0; #ifdef USE_32_BIT dword stat_len; #endif SMC_SELECT_BANK (2); packet_number = SMC_inw (LAN91C96_FIFO); if (packet_number & LAN91C96_FIFO_RXEMPTY) { return 0; } PRINTK3 ("%s:smc_rcv\n", SMC_DEV_NAME); /* start reading from the start of the packet */ SMC_outw (LAN91C96_PTR_READ | LAN91C96_PTR_RCV | LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER); /* First two words are status and packet_length */ #ifdef USE_32_BIT stat_len = SMC_inl (LAN91C96_DATA_HIGH); status = stat_len & 0xffff; packet_length = stat_len >> 16; #else status = SMC_inw (LAN91C96_DATA_HIGH); packet_length = SMC_inw (LAN91C96_DATA_HIGH); #endif packet_length &= 0x07ff; /* mask off top bits */ PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length); if (!(status & FRAME_FILTER)) { /* Adjust for having already read the first two words */ packet_length -= 4; /*4; */ /* set odd length for bug in LAN91C111, */ /* which never sets RS_ODDFRAME */ /* TODO ? */ #ifdef USE_32_BIT PRINTK3 (" Reading %d dwords (and %d bytes) \n", packet_length >> 2, packet_length & 3); /* QUESTION: Like in the TX routine, do I want to send the DWORDs or the bytes first, or some mixture. A mixture might improve already slow PIO performance */ SMC_insl (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 2); /* read the left over bytes */ if (packet_length & 3) { int i; byte *tail = (byte *) (NetRxPackets[0] + (packet_length & ~3)); dword leftover = SMC_inl (LAN91C96_DATA_HIGH); for (i = 0; i < (packet_length & 3); i++) *tail++ = (byte) (leftover >> (8 * i)) & 0xff; } #else PRINTK3 (" Reading %d words and %d byte(s) \n", (packet_length >> 1), packet_length & 1); SMC_insw (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 1); #endif /* USE_32_BIT */ #if SMC_DEBUG > 2 printf ("Receiving Packet\n"); print_packet (NetRxPackets[0], packet_length); #endif } else { /* error ... */ /* TODO ? */ is_error = 1; } while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) udelay (1); /* Wait until not busy */ /* error or good, tell the card to get rid of this packet */ SMC_outw (LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU); while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) udelay (1); /* Wait until not busy */ if (!is_error) { /* Pass the packet up to the protocol layers. */ NetReceive (NetRxPackets[0], packet_length); return packet_length; } else { return 0; } } /*---------------------------------------------------- * smc_close * * this makes the board clean up everything that it can * and not talk to the outside world. Caused by * an 'ifconfig ethX down' * -----------------------------------------------------*/ static int smc_close () { PRINTK2 ("%s:smc_close\n", SMC_DEV_NAME); /* clear everything */ smc_shutdown (); return 0; } #if SMC_DEBUG > 2 static void print_packet (byte * buf, int length) { #if 0 int i; int remainder; int lines; printf ("Packet of length %d \n", length); lines = length / 16; remainder = length % 16; for (i = 0; i < lines; i++) { int cur; for (cur = 0; cur < 8; cur++) { byte a, b; a = *(buf++); b = *(buf++); printf ("%02x%02x ", a, b); } printf ("\n"); } for (i = 0; i < remainder / 2; i++) { byte a, b; a = *(buf++); b = *(buf++); printf ("%02x%02x ", a, b); } printf ("\n"); #endif /* 0 */ } #endif /* SMC_DEBUG > 2 */ int eth_init (bd_t * bd) { return (smc_open(bd)); } void eth_halt () { smc_close (); } int eth_rx () { return smc_rcv (); } int eth_send (volatile void *packet, int length) { return smc_send_packet (packet, length); } #if 0 /*------------------------------------------------------------------------- * smc_hw_init() * * Function: * Reset and enable the device, check if the I/O space location * is correct * * Input parameters: * None * * Output: * 0 --> success * 1 --> error *-------------------------------------------------------------------------- */ static int smc_hw_init () { unsigned short status_test; /* The attribute register of the LAN91C96 is located at address 0x0e000000 on the lubbock platform */ volatile unsigned *attaddr = (unsigned *) (0x0e000000); /* first reset, then enable the device. Sequence is critical */ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_SRESET; udelay (100); attaddr[LAN91C96_ECOR] &= ~LAN91C96_ECOR_SRESET; attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_ENABLE; /* force 16-bit mode */ attaddr[LAN91C96_ECSR] &= ~LAN91C96_ECSR_IOIS8; udelay (100); /* check if the I/O address is correct, the upper byte of the bank select register should read 0x33 */ status_test = SMC_inw (LAN91C96_BANK_SELECT); if ((status_test & 0xFF00) != 0x3300) { printf ("Failed to initialize ethernetchip\n"); return 1; } return 0; } #endif /* 0 */ /* smc_get_ethaddr (bd_t * bd) * * This checks both the environment and the ROM for an ethernet address. If * found, the environment takes precedence. */ int smc_get_ethaddr (bd_t * bd) { int env_size = 0; int rom_valid = 0; int env_present = 0; int reg = 0; char *s = NULL; char *e = NULL; char *v_mac, es[] = "11:22:33:44:55:66"; char s_env_mac[64]; uchar v_env_mac[6]; uchar v_rom_mac[6]; env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac)); if (env_size != sizeof(es)) { /* Ignore if env is bad or not set */ printf ("\n*** Warning: ethaddr is not set properly, ignoring!!\n"); } else { env_present = 1; s = s_env_mac; for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */ v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0; if (s) s = (*e) ? e + 1 : e; } } rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */ if (!env_present) { /* if NO env */ if (rom_valid) { /* but ROM is valid */ v_mac = (char *)v_rom_mac; sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X", v_mac[0], v_mac[1], v_mac[2], v_mac[3], v_mac[4], v_mac[5]); setenv ("ethaddr", s_env_mac); } else { /* no env, bad ROM */ printf ("\n*** ERROR: ethaddr is NOT set !!\n"); return (-1); } } else { /* good env, don't care ROM */ v_mac = (char *)v_env_mac; /* always use a good env over a ROM */ } if (env_present && rom_valid) { /* if both env and ROM are good */ if (memcmp (v_env_mac, v_rom_mac, 6) != 0) { printf ("\nWarning: MAC addresses don't match:\n"); printf ("\tHW MAC address: " "%02X:%02X:%02X:%02X:%02X:%02X\n", v_rom_mac[0], v_rom_mac[1], v_rom_mac[2], v_rom_mac[3], v_rom_mac[4], v_rom_mac[5] ); printf ("\t\"ethaddr\" value: " "%02X:%02X:%02X:%02X:%02X:%02X\n", v_env_mac[0], v_env_mac[1], v_env_mac[2], v_env_mac[3], v_env_mac[4], v_env_mac[5]) ; debug ("### Set MAC addr from environment\n"); } } memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */ smc_set_mac_addr ((unsigned char *)v_mac); /* use old function to update smc default */ PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1], v_mac[2], v_mac[3], v_mac[4], v_mac[5]); return (0); } /* * get_rom_mac() * Note, this has omly been tested for the OMAP730 P2. */ int get_rom_mac (unsigned char *v_rom_mac) { #ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */ char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 }; memcpy (v_rom_mac, hw_mac_addr, 6); return (1); #else int i; SMC_SELECT_BANK (1); for (i=0; i<6; i++) { v_rom_mac[i] = SMC_inb (LAN91C96_IA0 + i); } return (1); #endif }