/* * Ethernet driver for TI TMS320DM644x (DaVinci) chips. * * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright * follows: * * ---------------------------------------------------------------------------- * * dm644x_emac.c * * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM * * Copyright (C) 2005 Texas Instruments. * * ---------------------------------------------------------------------------- * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ---------------------------------------------------------------------------- * Modifications: * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot. * ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors * */ #include <common.h> #include <command.h> #include <net.h> #include <miiphy.h> #include <malloc.h> #include <asm/arch/emac_defs.h> #include <asm/io.h> unsigned int emac_dbg = 0; #define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args) #ifdef DAVINCI_EMAC_GIG_ENABLE #define emac_gigabit_enable() davinci_eth_gigabit_enable() #else #define emac_gigabit_enable() /* no gigabit to enable */ #endif static void davinci_eth_mdio_enable(void); static int gen_init_phy(int phy_addr); static int gen_is_phy_connected(int phy_addr); static int gen_get_link_speed(int phy_addr); static int gen_auto_negotiate(int phy_addr); void eth_mdio_enable(void) { davinci_eth_mdio_enable(); } /* EMAC Addresses */ static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR; static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR; /* EMAC descriptors */ static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); static volatile emac_desc *emac_rx_active_head = 0; static volatile emac_desc *emac_rx_active_tail = 0; static int emac_rx_queue_active = 0; /* Receive packet buffers */ static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; /* PHY address for a discovered PHY (0xff - not found) */ static volatile u_int8_t active_phy_addr = 0xff; phy_t phy; static int davinci_eth_set_mac_addr(struct eth_device *dev) { unsigned long mac_hi; unsigned long mac_lo; /* * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast * receive) * Using channel 0 only - other channels are disabled * */ writel(0, &adap_emac->MACINDEX); mac_hi = (dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) | (dev->enetaddr[1] << 8) | (dev->enetaddr[0]); mac_lo = (dev->enetaddr[5] << 8) | (dev->enetaddr[4]); writel(mac_hi, &adap_emac->MACADDRHI); #if defined(DAVINCI_EMAC_VERSION2) writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH, &adap_emac->MACADDRLO); #else writel(mac_lo, &adap_emac->MACADDRLO); #endif writel(0, &adap_emac->MACHASH1); writel(0, &adap_emac->MACHASH2); /* Set source MAC address - REQUIRED */ writel(mac_hi, &adap_emac->MACSRCADDRHI); writel(mac_lo, &adap_emac->MACSRCADDRLO); return 0; } static void davinci_eth_mdio_enable(void) { u_int32_t clkdiv; clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT | MDIO_CONTROL_FAULT_ENABLE, &adap_mdio->CONTROL); while (readl(&adap_mdio->CONTROL) & MDIO_CONTROL_IDLE) ; } /* * Tries to find an active connected PHY. Returns 1 if address if found. * If no active PHY (or more than one PHY) found returns 0. * Sets active_phy_addr variable. */ static int davinci_eth_phy_detect(void) { u_int32_t phy_act_state; int i; active_phy_addr = 0xff; phy_act_state = readl(&adap_mdio->ALIVE) & EMAC_MDIO_PHY_MASK; if (phy_act_state == 0) return(0); /* No active PHYs */ debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state); for (i = 0; i < 32; i++) { if (phy_act_state & (1 << i)) { if (phy_act_state & ~(1 << i)) return(0); /* More than one PHY */ else { active_phy_addr = i; return(1); } } } return(0); /* Just to make GCC happy */ } /* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) { int tmp; while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) ; writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_READ | ((reg_num & 0x1f) << 21) | ((phy_addr & 0x1f) << 16), &adap_mdio->USERACCESS0); /* Wait for command to complete */ while ((tmp = readl(&adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO) ; if (tmp & MDIO_USERACCESS0_ACK) { *data = tmp & 0xffff; return(1); } *data = -1; return(0); } /* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */ int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) { while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) ; writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_WRITE | ((reg_num & 0x1f) << 21) | ((phy_addr & 0x1f) << 16) | (data & 0xffff), &adap_mdio->USERACCESS0); /* Wait for command to complete */ while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) ; return(1); } /* PHY functions for a generic PHY */ static int gen_init_phy(int phy_addr) { int ret = 1; if (gen_get_link_speed(phy_addr)) { /* Try another time */ ret = gen_get_link_speed(phy_addr); } return(ret); } static int gen_is_phy_connected(int phy_addr) { u_int16_t dummy; return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy)); } static int gen_get_link_speed(int phy_addr) { u_int16_t tmp; if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04)) return(1); return(0); } static int gen_auto_negotiate(int phy_addr) { u_int16_t tmp; if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) return(0); /* Restart Auto_negotiation */ tmp |= PHY_BMCR_AUTON; davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp); /*check AutoNegotiate complete */ udelay (10000); if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) return(0); if (!(tmp & PHY_BMSR_AUTN_COMP)) return(0); return(gen_get_link_speed(phy_addr)); } /* End of generic PHY functions */ #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) static int davinci_mii_phy_read(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value) { return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1); } static int davinci_mii_phy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value) { return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1); } #endif static void __attribute__((unused)) davinci_eth_gigabit_enable(void) { u_int16_t data; if (davinci_eth_phy_read(EMAC_MDIO_PHY_NUM, 0, &data)) { if (data & (1 << 6)) { /* speed selection MSB */ /* * Check if link detected is giga-bit * If Gigabit mode detected, enable gigbit in MAC */ writel(EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE, &adap_emac->MACCONTROL); } } } /* Eth device open */ static int davinci_eth_open(struct eth_device *dev, bd_t *bis) { dv_reg_p addr; u_int32_t clkdiv, cnt; volatile emac_desc *rx_desc; debug_emac("+ emac_open\n"); /* Reset EMAC module and disable interrupts in wrapper */ writel(1, &adap_emac->SOFTRESET); while (readl(&adap_emac->SOFTRESET) != 0) ; #if defined(DAVINCI_EMAC_VERSION2) writel(1, &adap_ewrap->softrst); while (readl(&adap_ewrap->softrst) != 0) ; #else writel(0, &adap_ewrap->EWCTL); for (cnt = 0; cnt < 5; cnt++) { clkdiv = readl(&adap_ewrap->EWCTL); } #endif rx_desc = emac_rx_desc; writel(1, &adap_emac->TXCONTROL); writel(1, &adap_emac->RXCONTROL); davinci_eth_set_mac_addr(dev); /* Set DMA 8 TX / 8 RX Head pointers to 0 */ addr = &adap_emac->TX0HDP; for(cnt = 0; cnt < 16; cnt++) writel(0, addr++); addr = &adap_emac->RX0HDP; for(cnt = 0; cnt < 16; cnt++) writel(0, addr++); /* Clear Statistics (do this before setting MacControl register) */ addr = &adap_emac->RXGOODFRAMES; for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++) writel(0, addr++); /* No multicast addressing */ writel(0, &adap_emac->MACHASH1); writel(0, &adap_emac->MACHASH2); /* Create RX queue and set receive process in place */ emac_rx_active_head = emac_rx_desc; for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) { rx_desc->next = (u_int32_t)(rx_desc + 1); rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; rx_desc++; } /* Finalize the rx desc list */ rx_desc--; rx_desc->next = 0; emac_rx_active_tail = rx_desc; emac_rx_queue_active = 1; /* Enable TX/RX */ writel(EMAC_MAX_ETHERNET_PKT_SIZE, &adap_emac->RXMAXLEN); writel(0, &adap_emac->RXBUFFEROFFSET); /* * No fancy configs - Use this for promiscous debug * - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */ writel(EMAC_RXMBPENABLE_RXBROADEN, &adap_emac->RXMBPENABLE); /* Enable ch 0 only */ writel(1, &adap_emac->RXUNICASTSET); /* Enable MII interface and Full duplex mode */ #ifdef CONFIG_SOC_DA8XX writel((EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE | EMAC_MACCONTROL_RMIISPEED_100), &adap_emac->MACCONTROL); #else writel((EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE), &adap_emac->MACCONTROL); #endif /* Init MDIO & get link state */ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT, &adap_mdio->CONTROL); /* We need to wait for MDIO to start */ udelay(1000); if (!phy.get_link_speed(active_phy_addr)) return(0); emac_gigabit_enable(); /* Start receive process */ writel((u_int32_t)emac_rx_desc, &adap_emac->RX0HDP); debug_emac("- emac_open\n"); return(1); } /* EMAC Channel Teardown */ static void davinci_eth_ch_teardown(int ch) { dv_reg dly = 0xff; dv_reg cnt; debug_emac("+ emac_ch_teardown\n"); if (ch == EMAC_CH_TX) { /* Init TX channel teardown */ writel(1, &adap_emac->TXTEARDOWN); do { /* * Wait here for Tx teardown completion interrupt to * occur. Note: A task delay can be called here to pend * rather than occupying CPU cycles - anyway it has * been found that teardown takes very few cpu cycles * and does not affect functionality */ dly--; udelay(1); if (dly == 0) break; cnt = readl(&adap_emac->TX0CP); } while (cnt != 0xfffffffc); writel(cnt, &adap_emac->TX0CP); writel(0, &adap_emac->TX0HDP); } else { /* Init RX channel teardown */ writel(1, &adap_emac->RXTEARDOWN); do { /* * Wait here for Rx teardown completion interrupt to * occur. Note: A task delay can be called here to pend * rather than occupying CPU cycles - anyway it has * been found that teardown takes very few cpu cycles * and does not affect functionality */ dly--; udelay(1); if (dly == 0) break; cnt = readl(&adap_emac->RX0CP); } while (cnt != 0xfffffffc); writel(cnt, &adap_emac->RX0CP); writel(0, &adap_emac->RX0HDP); } debug_emac("- emac_ch_teardown\n"); } /* Eth device close */ static void davinci_eth_close(struct eth_device *dev) { debug_emac("+ emac_close\n"); davinci_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */ davinci_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */ /* Reset EMAC module and disable interrupts in wrapper */ writel(1, &adap_emac->SOFTRESET); #if defined(DAVINCI_EMAC_VERSION2) writel(1, &adap_ewrap->softrst); #else writel(0, &adap_ewrap->EWCTL); #endif debug_emac("- emac_close\n"); } static int tx_send_loop = 0; /* * This function sends a single packet on the network and returns * positive number (number of bytes transmitted) or negative for error */ static int davinci_eth_send_packet (struct eth_device *dev, volatile void *packet, int length) { int ret_status = -1; tx_send_loop = 0; /* Return error if no link */ if (!phy.get_link_speed (active_phy_addr)) { printf ("WARN: emac_send_packet: No link\n"); return (ret_status); } emac_gigabit_enable(); /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */ if (length < EMAC_MIN_ETHERNET_PKT_SIZE) { length = EMAC_MIN_ETHERNET_PKT_SIZE; } /* Populate the TX descriptor */ emac_tx_desc->next = 0; emac_tx_desc->buffer = (u_int8_t *) packet; emac_tx_desc->buff_off_len = (length & 0xffff); emac_tx_desc->pkt_flag_len = ((length & 0xffff) | EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT | EMAC_CPPI_EOP_BIT); /* Send the packet */ writel((unsigned long)emac_tx_desc, &adap_emac->TX0HDP); /* Wait for packet to complete or link down */ while (1) { if (!phy.get_link_speed (active_phy_addr)) { davinci_eth_ch_teardown (EMAC_CH_TX); return (ret_status); } emac_gigabit_enable(); if (readl(&adap_emac->TXINTSTATRAW) & 0x01) { ret_status = length; break; } tx_send_loop++; } return (ret_status); } /* * This function handles receipt of a packet from the network */ static int davinci_eth_rcv_packet (struct eth_device *dev) { volatile emac_desc *rx_curr_desc; volatile emac_desc *curr_desc; volatile emac_desc *tail_desc; int status, ret = -1; rx_curr_desc = emac_rx_active_head; status = rx_curr_desc->pkt_flag_len; if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) { if (status & EMAC_CPPI_RX_ERROR_FRAME) { /* Error in packet - discard it and requeue desc */ printf ("WARN: emac_rcv_pkt: Error in packet\n"); } else { NetReceive (rx_curr_desc->buffer, (rx_curr_desc->buff_off_len & 0xffff)); ret = rx_curr_desc->buff_off_len & 0xffff; } /* Ack received packet descriptor */ writel((unsigned long)rx_curr_desc, &adap_emac->RX0CP); curr_desc = rx_curr_desc; emac_rx_active_head = (volatile emac_desc *) rx_curr_desc->next; if (status & EMAC_CPPI_EOQ_BIT) { if (emac_rx_active_head) { writel((unsigned long)emac_rx_active_head, &adap_emac->RX0HDP); } else { emac_rx_queue_active = 0; printf ("INFO:emac_rcv_packet: RX Queue not active\n"); } } /* Recycle RX descriptor */ rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; rx_curr_desc->next = 0; if (emac_rx_active_head == 0) { printf ("INFO: emac_rcv_pkt: active queue head = 0\n"); emac_rx_active_head = curr_desc; emac_rx_active_tail = curr_desc; if (emac_rx_queue_active != 0) { writel((unsigned long)emac_rx_active_head, &adap_emac->RX0HDP); printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n"); emac_rx_queue_active = 1; } } else { tail_desc = emac_rx_active_tail; emac_rx_active_tail = curr_desc; tail_desc->next = (unsigned int) curr_desc; status = tail_desc->pkt_flag_len; if (status & EMAC_CPPI_EOQ_BIT) { writel((unsigned long)curr_desc, &adap_emac->RX0HDP); status &= ~EMAC_CPPI_EOQ_BIT; tail_desc->pkt_flag_len = status; } } return (ret); } return (0); } /* * This function initializes the emac hardware. It does NOT initialize * EMAC modules power or pin multiplexors, that is done by board_init() * much earlier in bootup process. Returns 1 on success, 0 otherwise. */ int davinci_emac_initialize(void) { u_int32_t phy_id; u_int16_t tmp; int i; struct eth_device *dev; dev = malloc(sizeof *dev); if (dev == NULL) return -1; memset(dev, 0, sizeof *dev); dev->iobase = 0; dev->init = davinci_eth_open; dev->halt = davinci_eth_close; dev->send = davinci_eth_send_packet; dev->recv = davinci_eth_rcv_packet; dev->write_hwaddr = davinci_eth_set_mac_addr; eth_register(dev); davinci_eth_mdio_enable(); for (i = 0; i < 256; i++) { if (readl(&adap_mdio->ALIVE)) break; udelay(10); } if (i >= 256) { printf("No ETH PHY detected!!!\n"); return(0); } /* Find if a PHY is connected and get it's address */ if (!davinci_eth_phy_detect()) return(0); /* Get PHY ID and initialize phy_ops for a detected PHY */ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) { active_phy_addr = 0xff; return(0); } phy_id = (tmp << 16) & 0xffff0000; if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) { active_phy_addr = 0xff; return(0); } phy_id |= tmp & 0x0000ffff; switch (phy_id) { case PHY_LXT972: sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr); phy.init = lxt972_init_phy; phy.is_phy_connected = lxt972_is_phy_connected; phy.get_link_speed = lxt972_get_link_speed; phy.auto_negotiate = lxt972_auto_negotiate; break; case PHY_DP83848: sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr); phy.init = dp83848_init_phy; phy.is_phy_connected = dp83848_is_phy_connected; phy.get_link_speed = dp83848_get_link_speed; phy.auto_negotiate = dp83848_auto_negotiate; break; default: sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr); phy.init = gen_init_phy; phy.is_phy_connected = gen_is_phy_connected; phy.get_link_speed = gen_get_link_speed; phy.auto_negotiate = gen_auto_negotiate; } printf("Ethernet PHY: %s\n", phy.name); miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write); return(1); }