/* * Ethernet driver for TI TMS320DM644x (DaVinci) chips. * * Copyright (C) 2007 Sergey Kubushyn * * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright * follows: * * ---------------------------------------------------------------------------- * * dm644x_emac.c * * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM * * Copyright (C) 2005 Texas Instruments. * * ---------------------------------------------------------------------------- * * SPDX-License-Identifier: GPL-2.0+ * * Modifications: * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot. * ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors */ #include #include #include #include #include #include #include #include #include #include "davinci_emac.h" unsigned int emac_dbg = 0; #define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args) #ifdef EMAC_HW_RAM_ADDR static inline unsigned long BD_TO_HW(unsigned long x) { if (x == 0) return 0; return x - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR; } static inline unsigned long HW_TO_BD(unsigned long x) { if (x == 0) return 0; return x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR; } #else #define BD_TO_HW(x) (x) #define HW_TO_BD(x) (x) #endif #ifdef DAVINCI_EMAC_GIG_ENABLE #define emac_gigabit_enable(phy_addr) davinci_eth_gigabit_enable(phy_addr) #else #define emac_gigabit_enable(phy_addr) /* no gigabit to enable */ #endif #if !defined(CONFIG_SYS_EMAC_TI_CLKDIV) #define CONFIG_SYS_EMAC_TI_CLKDIV ((EMAC_MDIO_BUS_FREQ / \ EMAC_MDIO_CLOCK_FREQ) - 1) #endif static void davinci_eth_mdio_enable(void); static int gen_init_phy(int phy_addr); static int gen_is_phy_connected(int phy_addr); static int gen_get_link_speed(int phy_addr); static int gen_auto_negotiate(int phy_addr); void eth_mdio_enable(void) { davinci_eth_mdio_enable(); } /* EMAC Addresses */ static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR; static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR; /* EMAC descriptors */ static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); static volatile emac_desc *emac_rx_active_head = 0; static volatile emac_desc *emac_rx_active_tail = 0; static int emac_rx_queue_active = 0; /* Receive packet buffers */ static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * EMAC_RXBUF_SIZE] __aligned(ARCH_DMA_MINALIGN); #ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT #define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3 #endif /* PHY address for a discovered PHY (0xff - not found) */ static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; /* number of PHY found active */ static u_int8_t num_phy; phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; static int davinci_eth_set_mac_addr(struct eth_device *dev) { unsigned long mac_hi; unsigned long mac_lo; /* * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast * receive) * Using channel 0 only - other channels are disabled * */ writel(0, &adap_emac->MACINDEX); mac_hi = (dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) | (dev->enetaddr[1] << 8) | (dev->enetaddr[0]); mac_lo = (dev->enetaddr[5] << 8) | (dev->enetaddr[4]); writel(mac_hi, &adap_emac->MACADDRHI); #if defined(DAVINCI_EMAC_VERSION2) writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH, &adap_emac->MACADDRLO); #else writel(mac_lo, &adap_emac->MACADDRLO); #endif writel(0, &adap_emac->MACHASH1); writel(0, &adap_emac->MACHASH2); /* Set source MAC address - REQUIRED */ writel(mac_hi, &adap_emac->MACSRCADDRHI); writel(mac_lo, &adap_emac->MACSRCADDRLO); return 0; } static void davinci_eth_mdio_enable(void) { u_int32_t clkdiv; clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV; writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT | MDIO_CONTROL_FAULT_ENABLE, &adap_mdio->CONTROL); while (readl(&adap_mdio->CONTROL) & MDIO_CONTROL_IDLE) ; } /* * Tries to find an active connected PHY. Returns 1 if address if found. * If no active PHY (or more than one PHY) found returns 0. * Sets active_phy_addr variable. */ static int davinci_eth_phy_detect(void) { u_int32_t phy_act_state; int i; int j; unsigned int count = 0; for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++) active_phy_addr[i] = 0xff; udelay(1000); phy_act_state = readl(&adap_mdio->ALIVE); if (phy_act_state == 0) return 0; /* No active PHYs */ debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state); for (i = 0, j = 0; i < 32; i++) if (phy_act_state & (1 << i)) { count++; if (count <= CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) { active_phy_addr[j++] = i; } else { printf("%s: to many PHYs detected.\n", __func__); count = 0; break; } } num_phy = count; return count; } /* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) { int tmp; while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) ; writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_READ | ((reg_num & 0x1f) << 21) | ((phy_addr & 0x1f) << 16), &adap_mdio->USERACCESS0); /* Wait for command to complete */ while ((tmp = readl(&adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO) ; if (tmp & MDIO_USERACCESS0_ACK) { *data = tmp & 0xffff; return 0; } return -EIO; } /* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */ int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) { while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) ; writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_WRITE | ((reg_num & 0x1f) << 21) | ((phy_addr & 0x1f) << 16) | (data & 0xffff), &adap_mdio->USERACCESS0); /* Wait for command to complete */ while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) ; return 0; } /* PHY functions for a generic PHY */ static int gen_init_phy(int phy_addr) { int ret = 1; if (gen_get_link_speed(phy_addr)) { /* Try another time */ ret = gen_get_link_speed(phy_addr); } return(ret); } static int gen_is_phy_connected(int phy_addr) { u_int16_t dummy; return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy); } static int get_active_phy(void) { int i; for (i = 0; i < num_phy; i++) if (phy[i].get_link_speed(active_phy_addr[i])) return i; return -1; /* Return error if no link */ } static int gen_get_link_speed(int phy_addr) { u_int16_t tmp; if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04)) { #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) davinci_eth_phy_read(phy_addr, MII_LPA, &tmp); /* Speed doesn't matter, there is no setting for it in EMAC. */ if (tmp & (LPA_100FULL | LPA_10FULL)) { /* set EMAC for Full Duplex */ writel(EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE, &adap_emac->MACCONTROL); } else { /*set EMAC for Half Duplex */ writel(EMAC_MACCONTROL_MIIEN_ENABLE, &adap_emac->MACCONTROL); } if (tmp & (LPA_100FULL | LPA_100HALF)) writel(readl(&adap_emac->MACCONTROL) | EMAC_MACCONTROL_RMIISPEED_100, &adap_emac->MACCONTROL); else writel(readl(&adap_emac->MACCONTROL) & ~EMAC_MACCONTROL_RMIISPEED_100, &adap_emac->MACCONTROL); #endif return(1); } return(0); } static int gen_auto_negotiate(int phy_addr) { u_int16_t tmp; u_int16_t val; unsigned long cntr = 0; if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp)) return 0; val = tmp | BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100; davinci_eth_phy_write(phy_addr, MII_BMCR, val); if (!davinci_eth_phy_read(phy_addr, MII_ADVERTISE, &val)) return 0; val |= (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF); davinci_eth_phy_write(phy_addr, MII_ADVERTISE, val); if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp)) return(0); /* Restart Auto_negotiation */ tmp |= BMCR_ANRESTART; davinci_eth_phy_write(phy_addr, MII_BMCR, tmp); /*check AutoNegotiate complete */ do { udelay(40000); if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp)) return 0; if (tmp & BMSR_ANEGCOMPLETE) break; cntr++; } while (cntr < 200); if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp)) return(0); if (!(tmp & BMSR_ANEGCOMPLETE)) return(0); return(gen_get_link_speed(phy_addr)); } /* End of generic PHY functions */ #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) static int davinci_mii_phy_read(struct mii_dev *bus, int addr, int devad, int reg) { unsigned short value = 0; int retval = davinci_eth_phy_read(addr, reg, &value); if (retval < 0) return retval; return value; } static int davinci_mii_phy_write(struct mii_dev *bus, int addr, int devad, int reg, u16 value) { return davinci_eth_phy_write(addr, reg, value); } #endif static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr) { u_int16_t data; if (davinci_eth_phy_read(phy_addr, 0, &data)) { if (data & (1 << 6)) { /* speed selection MSB */ /* * Check if link detected is giga-bit * If Gigabit mode detected, enable gigbit in MAC */ writel(readl(&adap_emac->MACCONTROL) | EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE, &adap_emac->MACCONTROL); } } } /* Eth device open */ static int davinci_eth_open(struct eth_device *dev, bd_t *bis) { dv_reg_p addr; u_int32_t clkdiv, cnt; volatile emac_desc *rx_desc; int index; debug_emac("+ emac_open\n"); /* Reset EMAC module and disable interrupts in wrapper */ writel(1, &adap_emac->SOFTRESET); while (readl(&adap_emac->SOFTRESET) != 0) ; #if defined(DAVINCI_EMAC_VERSION2) writel(1, &adap_ewrap->softrst); while (readl(&adap_ewrap->softrst) != 0) ; #else writel(0, &adap_ewrap->EWCTL); for (cnt = 0; cnt < 5; cnt++) { clkdiv = readl(&adap_ewrap->EWCTL); } #endif #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0; adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0; adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0; #endif rx_desc = emac_rx_desc; writel(1, &adap_emac->TXCONTROL); writel(1, &adap_emac->RXCONTROL); davinci_eth_set_mac_addr(dev); /* Set DMA 8 TX / 8 RX Head pointers to 0 */ addr = &adap_emac->TX0HDP; for (cnt = 0; cnt < 8; cnt++) writel(0, addr++); addr = &adap_emac->RX0HDP; for (cnt = 0; cnt < 8; cnt++) writel(0, addr++); /* Clear Statistics (do this before setting MacControl register) */ addr = &adap_emac->RXGOODFRAMES; for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++) writel(0, addr++); /* No multicast addressing */ writel(0, &adap_emac->MACHASH1); writel(0, &adap_emac->MACHASH2); /* Create RX queue and set receive process in place */ emac_rx_active_head = emac_rx_desc; for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) { rx_desc->next = BD_TO_HW((u_int32_t)(rx_desc + 1)); rx_desc->buffer = &emac_rx_buffers[cnt * EMAC_RXBUF_SIZE]; rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; rx_desc++; } /* Finalize the rx desc list */ rx_desc--; rx_desc->next = 0; emac_rx_active_tail = rx_desc; emac_rx_queue_active = 1; /* Enable TX/RX */ writel(EMAC_MAX_ETHERNET_PKT_SIZE, &adap_emac->RXMAXLEN); writel(0, &adap_emac->RXBUFFEROFFSET); /* * No fancy configs - Use this for promiscous debug * - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */ writel(EMAC_RXMBPENABLE_RXBROADEN, &adap_emac->RXMBPENABLE); /* Enable ch 0 only */ writel(1, &adap_emac->RXUNICASTSET); /* Enable MII interface and Full duplex mode */ #if defined(CONFIG_SOC_DA8XX) || \ (defined(CONFIG_OMAP34XX) && defined(CONFIG_DRIVER_TI_EMAC_USE_RMII)) writel((EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE | EMAC_MACCONTROL_RMIISPEED_100), &adap_emac->MACCONTROL); #else writel((EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE), &adap_emac->MACCONTROL); #endif /* Init MDIO & get link state */ clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV; writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT, &adap_mdio->CONTROL); /* We need to wait for MDIO to start */ udelay(1000); index = get_active_phy(); if (index == -1) return(0); emac_gigabit_enable(active_phy_addr[index]); /* Start receive process */ writel(BD_TO_HW((u_int32_t)emac_rx_desc), &adap_emac->RX0HDP); debug_emac("- emac_open\n"); return(1); } /* EMAC Channel Teardown */ static void davinci_eth_ch_teardown(int ch) { dv_reg dly = 0xff; dv_reg cnt; debug_emac("+ emac_ch_teardown\n"); if (ch == EMAC_CH_TX) { /* Init TX channel teardown */ writel(0, &adap_emac->TXTEARDOWN); do { /* * Wait here for Tx teardown completion interrupt to * occur. Note: A task delay can be called here to pend * rather than occupying CPU cycles - anyway it has * been found that teardown takes very few cpu cycles * and does not affect functionality */ dly--; udelay(1); if (dly == 0) break; cnt = readl(&adap_emac->TX0CP); } while (cnt != 0xfffffffc); writel(cnt, &adap_emac->TX0CP); writel(0, &adap_emac->TX0HDP); } else { /* Init RX channel teardown */ writel(0, &adap_emac->RXTEARDOWN); do { /* * Wait here for Rx teardown completion interrupt to * occur. Note: A task delay can be called here to pend * rather than occupying CPU cycles - anyway it has * been found that teardown takes very few cpu cycles * and does not affect functionality */ dly--; udelay(1); if (dly == 0) break; cnt = readl(&adap_emac->RX0CP); } while (cnt != 0xfffffffc); writel(cnt, &adap_emac->RX0CP); writel(0, &adap_emac->RX0HDP); } debug_emac("- emac_ch_teardown\n"); } /* Eth device close */ static void davinci_eth_close(struct eth_device *dev) { debug_emac("+ emac_close\n"); davinci_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */ if (readl(&adap_emac->RXCONTROL) & 1) davinci_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */ /* Reset EMAC module and disable interrupts in wrapper */ writel(1, &adap_emac->SOFTRESET); #if defined(DAVINCI_EMAC_VERSION2) writel(1, &adap_ewrap->softrst); #else writel(0, &adap_ewrap->EWCTL); #endif #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0; adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0; adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0; #endif debug_emac("- emac_close\n"); } static int tx_send_loop = 0; /* * This function sends a single packet on the network and returns * positive number (number of bytes transmitted) or negative for error */ static int davinci_eth_send_packet (struct eth_device *dev, void *packet, int length) { int ret_status = -1; int index; tx_send_loop = 0; index = get_active_phy(); if (index == -1) { printf(" WARN: emac_send_packet: No link\n"); return (ret_status); } emac_gigabit_enable(active_phy_addr[index]); /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */ if (length < EMAC_MIN_ETHERNET_PKT_SIZE) { length = EMAC_MIN_ETHERNET_PKT_SIZE; } /* Populate the TX descriptor */ emac_tx_desc->next = 0; emac_tx_desc->buffer = (u_int8_t *) packet; emac_tx_desc->buff_off_len = (length & 0xffff); emac_tx_desc->pkt_flag_len = ((length & 0xffff) | EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT | EMAC_CPPI_EOP_BIT); flush_dcache_range((unsigned long)packet, (unsigned long)packet + ALIGN(length, PKTALIGN)); /* Send the packet */ writel(BD_TO_HW((unsigned long)emac_tx_desc), &adap_emac->TX0HDP); /* Wait for packet to complete or link down */ while (1) { if (!phy[index].get_link_speed(active_phy_addr[index])) { davinci_eth_ch_teardown (EMAC_CH_TX); return (ret_status); } emac_gigabit_enable(active_phy_addr[index]); if (readl(&adap_emac->TXINTSTATRAW) & 0x01) { ret_status = length; break; } tx_send_loop++; } return (ret_status); } /* * This function handles receipt of a packet from the network */ static int davinci_eth_rcv_packet (struct eth_device *dev) { volatile emac_desc *rx_curr_desc; volatile emac_desc *curr_desc; volatile emac_desc *tail_desc; int status, ret = -1; rx_curr_desc = emac_rx_active_head; if (!rx_curr_desc) return 0; status = rx_curr_desc->pkt_flag_len; if ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0) { if (status & EMAC_CPPI_RX_ERROR_FRAME) { /* Error in packet - discard it and requeue desc */ printf ("WARN: emac_rcv_pkt: Error in packet\n"); } else { unsigned long tmp = (unsigned long)rx_curr_desc->buffer; invalidate_dcache_range(tmp, tmp + EMAC_RXBUF_SIZE); net_process_received_packet( rx_curr_desc->buffer, rx_curr_desc->buff_off_len & 0xffff); ret = rx_curr_desc->buff_off_len & 0xffff; } /* Ack received packet descriptor */ writel(BD_TO_HW((ulong)rx_curr_desc), &adap_emac->RX0CP); curr_desc = rx_curr_desc; emac_rx_active_head = (volatile emac_desc *) (HW_TO_BD(rx_curr_desc->next)); if (status & EMAC_CPPI_EOQ_BIT) { if (emac_rx_active_head) { writel(BD_TO_HW((ulong)emac_rx_active_head), &adap_emac->RX0HDP); } else { emac_rx_queue_active = 0; printf ("INFO:emac_rcv_packet: RX Queue not active\n"); } } /* Recycle RX descriptor */ rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; rx_curr_desc->next = 0; if (emac_rx_active_head == 0) { printf ("INFO: emac_rcv_pkt: active queue head = 0\n"); emac_rx_active_head = curr_desc; emac_rx_active_tail = curr_desc; if (emac_rx_queue_active != 0) { writel(BD_TO_HW((ulong)emac_rx_active_head), &adap_emac->RX0HDP); printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n"); emac_rx_queue_active = 1; } } else { tail_desc = emac_rx_active_tail; emac_rx_active_tail = curr_desc; tail_desc->next = BD_TO_HW((ulong) curr_desc); status = tail_desc->pkt_flag_len; if (status & EMAC_CPPI_EOQ_BIT) { writel(BD_TO_HW((ulong)curr_desc), &adap_emac->RX0HDP); status &= ~EMAC_CPPI_EOQ_BIT; tail_desc->pkt_flag_len = status; } } return (ret); } return (0); } /* * This function initializes the emac hardware. It does NOT initialize * EMAC modules power or pin multiplexors, that is done by board_init() * much earlier in bootup process. Returns 1 on success, 0 otherwise. */ int davinci_emac_initialize(void) { u_int32_t phy_id; u_int16_t tmp; int i; int ret; struct eth_device *dev; dev = malloc(sizeof *dev); if (dev == NULL) return -1; memset(dev, 0, sizeof *dev); strcpy(dev->name, "DaVinci-EMAC"); dev->iobase = 0; dev->init = davinci_eth_open; dev->halt = davinci_eth_close; dev->send = davinci_eth_send_packet; dev->recv = davinci_eth_rcv_packet; dev->write_hwaddr = davinci_eth_set_mac_addr; eth_register(dev); davinci_eth_mdio_enable(); /* let the EMAC detect the PHYs */ udelay(5000); for (i = 0; i < 256; i++) { if (readl(&adap_mdio->ALIVE)) break; udelay(1000); } if (i >= 256) { printf("No ETH PHY detected!!!\n"); return(0); } /* Find if PHY(s) is/are connected */ ret = davinci_eth_phy_detect(); if (!ret) return(0); else debug_emac(" %d ETH PHY detected\n", ret); /* Get PHY ID and initialize phy_ops for a detected PHY */ for (i = 0; i < num_phy; i++) { if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID1, &tmp)) { active_phy_addr[i] = 0xff; continue; } phy_id = (tmp << 16) & 0xffff0000; if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID2, &tmp)) { active_phy_addr[i] = 0xff; continue; } phy_id |= tmp & 0x0000ffff; switch (phy_id) { #ifdef PHY_KSZ8873 case PHY_KSZ8873: sprintf(phy[i].name, "KSZ8873 @ 0x%02x", active_phy_addr[i]); phy[i].init = ksz8873_init_phy; phy[i].is_phy_connected = ksz8873_is_phy_connected; phy[i].get_link_speed = ksz8873_get_link_speed; phy[i].auto_negotiate = ksz8873_auto_negotiate; break; #endif #ifdef PHY_LXT972 case PHY_LXT972: sprintf(phy[i].name, "LXT972 @ 0x%02x", active_phy_addr[i]); phy[i].init = lxt972_init_phy; phy[i].is_phy_connected = lxt972_is_phy_connected; phy[i].get_link_speed = lxt972_get_link_speed; phy[i].auto_negotiate = lxt972_auto_negotiate; break; #endif #ifdef PHY_DP83848 case PHY_DP83848: sprintf(phy[i].name, "DP83848 @ 0x%02x", active_phy_addr[i]); phy[i].init = dp83848_init_phy; phy[i].is_phy_connected = dp83848_is_phy_connected; phy[i].get_link_speed = dp83848_get_link_speed; phy[i].auto_negotiate = dp83848_auto_negotiate; break; #endif #ifdef PHY_ET1011C case PHY_ET1011C: sprintf(phy[i].name, "ET1011C @ 0x%02x", active_phy_addr[i]); phy[i].init = gen_init_phy; phy[i].is_phy_connected = gen_is_phy_connected; phy[i].get_link_speed = et1011c_get_link_speed; phy[i].auto_negotiate = gen_auto_negotiate; break; #endif default: sprintf(phy[i].name, "GENERIC @ 0x%02x", active_phy_addr[i]); phy[i].init = gen_init_phy; phy[i].is_phy_connected = gen_is_phy_connected; phy[i].get_link_speed = gen_get_link_speed; phy[i].auto_negotiate = gen_auto_negotiate; } debug("Ethernet PHY: %s\n", phy[i].name); int retval; struct mii_dev *mdiodev = mdio_alloc(); if (!mdiodev) return -ENOMEM; strncpy(mdiodev->name, phy[i].name, MDIO_NAME_LEN); mdiodev->read = davinci_mii_phy_read; mdiodev->write = davinci_mii_phy_write; retval = mdio_register(mdiodev); if (retval < 0) return retval; } #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) && \ !defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE) for (i = 0; i < num_phy; i++) { if (phy[i].is_phy_connected(i)) phy[i].auto_negotiate(i); } #endif return(1); }