/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */ /* * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * */ #ifndef _AX88180_H_ #define _AX88180_H_ #include <asm/io.h> #include <asm/types.h> #include <config.h> typedef enum _ax88180_link_state { INS_LINK_DOWN, INS_LINK_UP, INS_LINK_UNKNOWN } ax88180_link_state; struct ax88180_private { unsigned char BusWidth; unsigned char PadSize; unsigned short PhyAddr; unsigned short PhyID0; unsigned short PhyID1; unsigned short FirstTxDesc; unsigned short NextTxDesc; ax88180_link_state LinkState; }; #define BUS_WIDTH_16 1 #define BUS_WIDTH_32 2 #define ENABLE_JUMBO 1 #define DISABLE_JUMBO 0 #define ENABLE_BURST 1 #define DISABLE_BURST 0 #define NORMAL_RX_MODE 0 #define RX_LOOPBACK_MODE 1 #define RX_INIFINIT_LOOP_MODE 2 #define TX_INIFINIT_LOOP_MODE 3 #define DEFAULT_ETH_MTU 1500 /* Jumbo packet size 4086 bytes included 4 bytes CRC*/ #define MAX_JUMBO_MTU 4072 /* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */ #define MAX_TX_JUMBO_SIZE 4086 /* Max Rx Jumbo size is 15K Bytes */ #define MAX_RX_SIZE 0x3C00 #define MARVELL_ALASKA_PHYSID0 0x141 #define MARVELL_88E1118_PHYSID1 0xE40 #define CICADA_CIS8201_PHYSID0 0x000F #define MEDIA_AUTO 0 #define MEDIA_1000FULL 1 #define MEDIA_1000HALF 2 #define MEDIA_100FULL 3 #define MEDIA_100HALF 4 #define MEDIA_10FULL 5 #define MEDIA_10HALF 6 #define MEDIA_UNKNOWN 7 #define AUTO_MEDIA 0 #define FORCE_MEDIA 1 #define TXDP_MASK 3 #define TXDP0 0 #define TXDP1 1 #define TXDP2 2 #define TXDP3 3 #define CMD_MAP_SIZE 0x100 #if defined (CONFIG_DRIVER_AX88180_16BIT) #define AX88180_MEMORY_SIZE 0x00004000 #define START_BASE 0x1000 #define RX_BUF_SIZE 0x1000 #define TX_BUF_SIZE 0x0F00 #define TX_BASE START_BASE #define CMD_BASE (TX_BASE + TX_BUF_SIZE) #define RX_BASE (CMD_BASE + CMD_MAP_SIZE) #else #define AX88180_MEMORY_SIZE 0x00010000 #define RX_BUF_SIZE 0x8000 #define TX_BUF_SIZE 0x7C00 #define RX_BASE 0x0000 #define TX_BASE (RX_BASE + RX_BUF_SIZE) #define CMD_BASE (TX_BASE + TX_BUF_SIZE) #endif /* AX88180 Memory Mapping Definition */ #define RXBUFFER_START RX_BASE #define RX_PACKET_LEN_OFFSET 0 #define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */ #define TXBUFFER_START TX_BASE /* AX88180 MAC Register Definition */ #define DECODE (0) #define DECODE_EN 0x00000001 #define BASE (6) #define CMD (CMD_BASE + 0x0000) #define WAKEMOD 0x00000001 #define TXEN 0x00000100 #define RXEN 0x00000200 #define DEFAULT_CMD WAKEMOD #define IMR (CMD_BASE + 0x0004) #define IMR_RXBUFFOVR 0x00000001 #define IMR_WATCHDOG 0x00000002 #define IMR_TX 0x00000008 #define IMR_RX 0x00000010 #define IMR_PHY 0x00000020 #define CLEAR_IMR 0x00000000 #define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\ IMR_RXBUFFOVR | IMR_WATCHDOG) #define ISR (CMD_BASE + 0x0008) #define ISR_RXBUFFOVR 0x00000001 #define ISR_WATCHDOG 0x00000002 #define ISR_TX 0x00000008 #define ISR_RX 0x00000010 #define ISR_PHY 0x00000020 #define TXCFG (CMD_BASE + 0x0010) #define AUTOPAD_CRC 0x00000050 #define DEFAULT_TXCFG AUTOPAD_CRC #define TXCMD (CMD_BASE + 0x0014) #define TXCMD_TXDP_MASK 0x00006000 #define TXCMD_TXDP0 0x00000000 #define TXCMD_TXDP1 0x00002000 #define TXCMD_TXDP2 0x00004000 #define TXCMD_TXDP3 0x00006000 #define TX_START_WRITE 0x00008000 #define TX_STOP_WRITE 0x00000000 #define DEFAULT_TXCMD 0x00000000 #define TXBS (CMD_BASE + 0x0018) #define TXDP0_USED 0x00000001 #define TXDP1_USED 0x00000002 #define TXDP2_USED 0x00000004 #define TXDP3_USED 0x00000008 #define DEFAULT_TXBS 0x00000000 #define TXDES0 (CMD_BASE + 0x0020) #define TXDPx_ENABLE 0x00008000 #define TXDPx_LEN_MASK 0x00001FFF #define DEFAULT_TXDES0 0x00000000 #define TXDES1 (CMD_BASE + 0x0024) #define TXDPx_ENABLE 0x00008000 #define TXDPx_LEN_MASK 0x00001FFF #define DEFAULT_TXDES1 0x00000000 #define TXDES2 (CMD_BASE + 0x0028) #define TXDPx_ENABLE 0x00008000 #define TXDPx_LEN_MASK 0x00001FFF #define DEFAULT_TXDES2 0x00000000 #define TXDES3 (CMD_BASE + 0x002C) #define TXDPx_ENABLE 0x00008000 #define TXDPx_LEN_MASK 0x00001FFF #define DEFAULT_TXDES3 0x00000000 #define RXCFG (CMD_BASE + 0x0030) #define RXBUFF_PROTECT 0x00000001 #define RXTCPCRC_CHECK 0x00000010 #define RXFLOW_ENABLE 0x00000100 #define DEFAULT_RXCFG RXBUFF_PROTECT #define RXCURT (CMD_BASE + 0x0034) #define DEFAULT_RXCURT 0x00000000 #define RXBOUND (CMD_BASE + 0x0038) #define DEFAULT_RXBOUND 0x7FF /* RX pages 0~7FFh */ #define MACCFG0 (CMD_BASE + 0x0040) #define MACCFG0_BIT3_0 0x00000007 #define IPGT_VAL 0x00000150 #define TXFLOW_ENABLE 0x00001000 #define SPEED100 0x00008000 #define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0) #define MACCFG1 (CMD_BASE + 0x0044) #define RGMII_EN 0x00000002 #define RXFLOW_EN 0x00000020 #define FULLDUPLEX 0x00000040 #define MAX_JUMBO_LEN 0x00000780 #define RXJUMBO_EN 0x00000800 #define GIGA_MODE_EN 0x00001000 #define RXCRC_CHECK 0x00002000 #define RXPAUSE_DA_CHECK 0x00004000 #define JUMBO_LEN_4K 0x00000200 #define JUMBO_LEN_15K 0x00000780 #define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \ RGMII_EN) #define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK) #define MACCFG2 (CMD_BASE + 0x0048) #define MACCFG2_BIT15_8 0x00000100 #define JAM_LIMIT_MASK 0x000000FC #define DEFAULT_JAM_LIMIT 0x00000064 #define DEFAULT_MACCFG2 MACCFG2_BIT15_8 #define MACCFG3 (CMD_BASE + 0x004C) #define IPGR2_VAL 0x0000000E #define IPGR1_VAL 0x00000600 #define NOABORT 0x00008000 #define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL) #define TXPAUT (CMD_BASE + 0x0054) #define DEFAULT_TXPAUT 0x001FE000 #define RXBTHD0 (CMD_BASE + 0x0058) #define DEFAULT_RXBTHD0 0x00000300 #define RXBTHD1 (CMD_BASE + 0x005C) #define DEFAULT_RXBTHD1 0x00000600 #define RXFULTHD (CMD_BASE + 0x0060) #define DEFAULT_RXFULTHD 0x00000100 #define MISC (CMD_BASE + 0x0068) /* Normal operation mode */ #define MISC_NORMAL 0x00000003 /* Clear bit 0 to reset MAC */ #define MISC_RESET_MAC 0x00000002 /* Clear bit 1 to reset PHY */ #define MISC_RESET_PHY 0x00000001 /* Clear bit 0 and 1 to reset MAC and PHY */ #define MISC_RESET_MAC_PHY 0x00000000 #define DEFAULT_MISC MISC_NORMAL #define MACID0 (CMD_BASE + 0x0070) #define MACID1 (CMD_BASE + 0x0074) #define MACID2 (CMD_BASE + 0x0078) #define TXLEN (CMD_BASE + 0x007C) #define DEFAULT_TXLEN 0x000005FC #define RXFILTER (CMD_BASE + 0x0080) #define RX_RXANY 0x00000001 #define RX_MULTICAST 0x00000002 #define RX_UNICAST 0x00000004 #define RX_BROADCAST 0x00000008 #define RX_MULTI_HASH 0x00000010 #define DISABLE_RXFILTER 0x00000000 #define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST) #define MDIOCTRL (CMD_BASE + 0x0084) #define PHY_ADDR_MASK 0x0000001F #define REG_ADDR_MASK 0x00001F00 #define READ_PHY 0x00004000 #define WRITE_PHY 0x00008000 #define MDIODP (CMD_BASE + 0x0088) #define GPIOCTRL (CMD_BASE + 0x008C) #define RXINDICATOR (CMD_BASE + 0x0090) #define RX_START_READ 0x00000001 #define RX_STOP_READ 0x00000000 #define DEFAULT_RXINDICATOR RX_STOP_READ #define TXST (CMD_BASE + 0x0094) #define MDCCLKPAT (CMD_BASE + 0x00A0) #define RXIPCRCCNT (CMD_BASE + 0x00A4) #define RXCRCCNT (CMD_BASE + 0x00A8) #define TXFAILCNT (CMD_BASE + 0x00AC) #define PROMDP (CMD_BASE + 0x00B0) #define PROMCTRL (CMD_BASE + 0x00B4) #define RELOAD_EEPROM 0x00000200 #define MAXRXLEN (CMD_BASE + 0x00B8) #define HASHTAB0 (CMD_BASE + 0x00C0) #define HASHTAB1 (CMD_BASE + 0x00C4) #define HASHTAB2 (CMD_BASE + 0x00C8) #define HASHTAB3 (CMD_BASE + 0x00CC) #define DOGTHD0 (CMD_BASE + 0x00E0) #define DEFAULT_DOGTHD0 0x0000FFFF #define DOGTHD1 (CMD_BASE + 0x00E4) #define START_WATCHDOG_TIMER 0x00008000 #define DEFAULT_DOGTHD1 0x00000FFF #define SOFTRST (CMD_BASE + 0x00EC) #define SOFTRST_NORMAL 0x00000003 #define SOFTRST_RESET_MAC 0x00000002 /* Marvell 88E1111 Gigabit PHY Register Definition */ #define M88_SSR 0x0011 #define SSR_SPEED_MASK 0xC000 #define SSR_SPEED_1000 0x8000 #define SSR_SPEED_100 0x4000 #define SSR_SPEED_10 0x0000 #define SSR_DUPLEX 0x2000 #define SSR_MEDIA_RESOLVED_OK 0x0800 #define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX) #define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX) #define SSR_1000HALF SSR_SPEED_1000 #define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX) #define SSR_100HALF SSR_SPEED_100 #define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX) #define SSR_10HALF SSR_SPEED_10 #define M88_IER 0x0012 #define LINK_CHANGE_INT 0x0400 #define M88_ISR 0x0013 #define LINK_CHANGE_STATUS 0x0400 #define M88E1111_EXT_SCR 0x0014 #define RGMII_RXCLK_DELAY 0x0080 #define RGMII_TXCLK_DELAY 0x0002 #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY) #define M88E1111_EXT_SSR 0x001B #define HWCFG_MODE_MASK 0x000F #define RGMII_COPPER_MODE 0x000B /* Marvell 88E1118 Gigabit PHY Register Definition */ #define M88E1118_CR 0x14 #define M88E1118_CR_RGMII_RXCLK_DELAY 0x0020 #define M88E1118_CR_RGMII_TXCLK_DELAY 0x0010 #define M88E1118_CR_DEFAULT (M88E1118_CR_RGMII_TXCLK_DELAY | \ M88E1118_CR_RGMII_RXCLK_DELAY) #define M88E1118_LEDCTL 0x10 /* Reg 16 on page 3 */ #define M88E1118_LEDCTL_LED2INT 0x200 #define M88E1118_LEDCTL_LED2BLNK 0x400 #define M88E1118_LEDCTL_LED0DUALMODE1 0xc #define M88E1118_LEDCTL_LED0DUALMODE2 0xd #define M88E1118_LEDCTL_LED0DUALMODE3 0xe #define M88E1118_LEDCTL_LED0DUALMODE4 0xf #define M88E1118_LEDCTL_DEFAULT (M88E1118_LEDCTL_LED2BLNK | \ M88E1118_LEDCTL_LED0DUALMODE4) #define M88E1118_LEDMIX 0x11 /* Reg 17 on page 3 */ #define M88E1118_LEDMIX_LED050 0x4 #define M88E1118_LEDMIX_LED150 0x8 #define M88E1118_PAGE_SEL 0x16 /* Reg page select */ /* CICADA CIS8201 Gigabit PHY Register Definition */ #define CIS_IMR 0x0019 #define CIS_INT_ENABLE 0x8000 #define CIS_LINK_CHANGE_INT 0x2000 #define CIS_ISR 0x001A #define CIS_INT_PENDING 0x8000 #define CIS_LINK_CHANGE_STATUS 0x2000 #define CIS_AUX_CTRL_STATUS 0x001C #define CIS_AUTONEG_COMPLETE 0x8000 #define CIS_SPEED_MASK 0x0018 #define CIS_SPEED_1000 0x0010 #define CIS_SPEED_100 0x0008 #define CIS_SPEED_10 0x0000 #define CIS_DUPLEX 0x0020 #define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX) #define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX) #define CIS_1000HALF CIS_SPEED_1000 #define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX) #define CIS_100HALF CIS_SPEED_100 #define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX) #define CIS_10HALF CIS_SPEED_10 #define CIS_SMI_PRIORITY 0x0004 static inline unsigned short INW (struct eth_device *dev, unsigned long addr) { return le16_to_cpu(readw(addr + (void *)dev->iobase)); } /* Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer */ #if defined (CONFIG_DRIVER_AX88180_16BIT) static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) { writew(cpu_to_le16(command), addr + (void *)dev->iobase); } static inline unsigned short READ_RXBUF (struct eth_device *dev) { return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase)); } static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data) { writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase); } #else static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) { writel(cpu_to_le32(command), addr + (void *)dev->iobase); } static inline unsigned long READ_RXBUF (struct eth_device *dev) { return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase)); } static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data) { writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase); } #endif #endif /* _AX88180_H_ */