/* * Copyright (C) 2009 BuS Elektronik GmbH & Co. KG * Jens Scharsig (esw@bus-elektronik.de) * * (C) Copyright 2003 * Author : Hamid Ikdoumi (Atmel) * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <asm/io.h> #ifndef CONFIG_AT91_LEGACY #include <asm/arch/hardware.h> #include <asm/arch/at91_emac.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_pio.h> #else /* remove next 5 lines, if all RM9200 boards convert to at91 arch */ #include <asm/arch-at91/at91rm9200.h> #include <asm/arch-at91/hardware.h> #include <asm/arch-at91/at91_emac.h> #include <asm/arch-at91/at91_pmc.h> #include <asm/arch-at91/at91_pio.h> #endif #include <net.h> #include <netdev.h> #include <malloc.h> #include <miiphy.h> #include <linux/mii.h> #undef MII_DEBUG #undef ET_DEBUG #if (CONFIG_SYS_RX_ETH_BUFFER > 1024) #error AT91 EMAC supports max 1024 RX buffers. \ Please decrease the CONFIG_SYS_RX_ETH_BUFFER value #endif #ifndef CONFIG_DRIVER_AT91EMAC_PHYADDR #define CONFIG_DRIVER_AT91EMAC_PHYADDR 0 #endif /* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */ #if (AT91C_MASTER_CLOCK > 80000000) #define HCLK_DIV AT91_EMAC_CFG_MCLK_64 #elif (AT91C_MASTER_CLOCK > 40000000) #define HCLK_DIV AT91_EMAC_CFG_MCLK_32 #elif (AT91C_MASTER_CLOCK > 20000000) #define HCLK_DIV AT91_EMAC_CFG_MCLK_16 #else #define HCLK_DIV AT91_EMAC_CFG_MCLK_8 #endif #ifdef ET_DEBUG #define DEBUG_AT91EMAC(...) printf(__VA_ARGS__); #else #define DEBUG_AT91EMAC(...) #endif #ifdef MII_DEBUG #define DEBUG_AT91PHY(...) printf(__VA_ARGS__); #else #define DEBUG_AT91PHY(...) #endif #ifndef CONFIG_DRIVER_AT91EMAC_QUIET #define VERBOSEP(...) printf(__VA_ARGS__); #else #define VERBOSEP(...) #endif #define RBF_ADDR 0xfffffffc #define RBF_OWNER (1<<0) #define RBF_WRAP (1<<1) #define RBF_BROADCAST (1<<31) #define RBF_MULTICAST (1<<30) #define RBF_UNICAST (1<<29) #define RBF_EXTERNAL (1<<28) #define RBF_UNKOWN (1<<27) #define RBF_SIZE 0x07ff #define RBF_LOCAL4 (1<<26) #define RBF_LOCAL3 (1<<25) #define RBF_LOCAL2 (1<<24) #define RBF_LOCAL1 (1<<23) #define RBF_FRAMEMAX CONFIG_SYS_RX_ETH_BUFFER #define RBF_FRAMELEN 0x600 typedef struct { unsigned long addr, size; } rbf_t; typedef struct { rbf_t rbfdt[RBF_FRAMEMAX]; unsigned long rbindex; } emac_device; void at91emac_EnableMDIO(at91_emac_t *at91mac) { /* Mac CTRL reg set for MDIO enable */ writel(readl(&at91mac->ctl) | AT91_EMAC_CTL_MPE, &at91mac->ctl); } void at91emac_DisableMDIO(at91_emac_t *at91mac) { /* Mac CTRL reg set for MDIO disable */ writel(readl(&at91mac->ctl) & ~AT91_EMAC_CTL_MPE, &at91mac->ctl); } int at91emac_read(at91_emac_t *at91mac, unsigned char addr, unsigned char reg, unsigned short *value) { at91emac_EnableMDIO(at91mac); writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R | AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 | AT91_EMAC_MAN_PHYA(addr), &at91mac->man); udelay(10000); *value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK; at91emac_DisableMDIO(at91mac); DEBUG_AT91PHY("AT91PHY read %x REG(%d)=%x\n", at91mac, reg, *value) return 0; } int at91emac_write(at91_emac_t *at91mac, unsigned char addr, unsigned char reg, unsigned short value) { DEBUG_AT91PHY("AT91PHY write %x REG(%d)=%x\n", at91mac, reg, &value) at91emac_EnableMDIO(at91mac); writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_W | AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 | AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK), &at91mac->man); udelay(10000); at91emac_DisableMDIO(at91mac); return 0; } #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) at91_emac_t *get_emacbase_by_name(char *devname) { struct eth_device *netdev; netdev = eth_get_dev_by_name(devname); return (at91_emac_t *) netdev->iobase; } int at91emac_mii_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) { at91_emac_t *emac; emac = get_emacbase_by_name(devname); at91emac_read(emac , addr, reg, value); return 0; } int at91emac_mii_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) { at91_emac_t *emac; emac = get_emacbase_by_name(devname); at91emac_write(emac, addr, reg, value); return 0; } #endif static int at91emac_phy_reset(struct eth_device *netdev) { int i; u16 status, adv; at91_emac_t *emac; emac = (at91_emac_t *) netdev->iobase; adv = ADVERTISE_CSMA | ADVERTISE_ALL; at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_ADVERTISE, adv); VERBOSEP("%s: Starting autonegotiation...\n", netdev->name); at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); for (i = 0; i < 100000 / 100; i++) { at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &status); if (status & BMSR_ANEGCOMPLETE) break; udelay(100); } if (status & BMSR_ANEGCOMPLETE) { VERBOSEP("%s: Autonegotiation complete\n", netdev->name); } else { printf("%s: Autonegotiation timed out (status=0x%04x)\n", netdev->name, status); return 1; } return 0; } static int at91emac_phy_init(struct eth_device *netdev) { u16 phy_id, status, adv, lpa; int media, speed, duplex; int i; at91_emac_t *emac; emac = (at91_emac_t *) netdev->iobase; /* Check if the PHY is up to snuff... */ at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_PHYSID1, &phy_id); if (phy_id == 0xffff) { printf("%s: No PHY present\n", netdev->name); return 1; } at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &status); if (!(status & BMSR_LSTATUS)) { /* Try to re-negotiate if we don't have link already. */ if (at91emac_phy_reset(netdev)) return 2; for (i = 0; i < 100000 / 100; i++) { at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &status); if (status & BMSR_LSTATUS) break; udelay(100); } } if (!(status & BMSR_LSTATUS)) { VERBOSEP("%s: link down\n", netdev->name); return 3; } else { at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_ADVERTISE, &adv); at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_LPA, &lpa); media = mii_nway_result(lpa & adv); speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); duplex = (media & ADVERTISE_FULL) ? 1 : 0; VERBOSEP("%s: link up, %sMbps %s-duplex\n", netdev->name, speed ? "100" : "10", duplex ? "full" : "half"); } return 0; } int at91emac_UpdateLinkSpeed(at91_emac_t *emac) { unsigned short stat1; at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1); if (!(stat1 & BMSR_LSTATUS)) /* link status up? */ return 1; if (stat1 & BMSR_100FULL) { /*set Emac for 100BaseTX and Full Duplex */ writel(readl(&emac->cfg) | AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD, &emac->cfg); return 0; } if (stat1 & BMSR_10FULL) { /*set MII for 10BaseT and Full Duplex */ writel((readl(&emac->cfg) & ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD) ) | AT91_EMAC_CFG_FD, &emac->cfg); return 0; } if (stat1 & BMSR_100HALF) { /*set MII for 100BaseTX and Half Duplex */ writel((readl(&emac->cfg) & ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD) ) | AT91_EMAC_CFG_SPD, &emac->cfg); return 0; } if (stat1 & BMSR_10HALF) { /*set MII for 10BaseT and Half Duplex */ writel((readl(&emac->cfg) & ~(AT91_EMAC_CFG_SPD | AT91_EMAC_CFG_FD)), &emac->cfg); return 0; } return 1; } static int at91emac_init(struct eth_device *netdev, bd_t *bd) { int i; u32 value; emac_device *dev; at91_emac_t *emac; at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; emac = (at91_emac_t *) netdev->iobase; dev = (emac_device *) netdev->priv; /* PIO Disable Register */ value = AT91_PMX_AA_EMDIO | AT91_PMX_AA_EMDC | AT91_PMX_AA_ERXER | AT91_PMX_AA_ERX1 | AT91_PMX_AA_ERX0 | AT91_PMX_AA_ECRS | AT91_PMX_AA_ETX1 | AT91_PMX_AA_ETX0 | AT91_PMX_AA_ETXEN | AT91_PMX_AA_EREFCK; writel(value, &pio->pioa.pdr); writel(value, &pio->pioa.asr); #ifdef CONFIG_RMII value = AT91_PMX_BA_ERXCK; #else value = AT91_PMX_BA_ERXCK | AT91_PMX_BA_ECOL | AT91_PMX_BA_ERXDV | AT91_PMX_BA_ERX3 | AT91_PMX_BA_ERX2 | AT91_PMX_BA_ETXER | AT91_PMX_BA_ETX3 | AT91_PMX_BA_ETX2; #endif writel(value, &pio->piob.pdr); writel(value, &pio->piob.bsr); writel(1 << AT91_ID_EMAC, &pmc->pcer); writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); /* Init Ethernet buffers */ for (i = 0; i < RBF_FRAMEMAX; i++) { dev->rbfdt[i].addr = (unsigned long) NetRxPackets[i]; dev->rbfdt[i].size = 0; } dev->rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP; dev->rbindex = 0; writel((u32) &(dev->rbfdt[0]), &emac->rbqp); writel(readl(&emac->rsr) & ~(AT91_EMAC_RSR_OVR | AT91_EMAC_RSR_REC | AT91_EMAC_RSR_BNA), &emac->rsr); value = AT91_EMAC_CFG_CAF | AT91_EMAC_CFG_NBC | HCLK_DIV; #ifdef CONFIG_RMII value |= AT91_EMAC_CFG_RMII; #endif writel(value, &emac->cfg); writel(readl(&emac->ctl) | AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE, &emac->ctl); if (!at91emac_phy_init(netdev)) { at91emac_UpdateLinkSpeed(emac); return 0; } return 1; } static void at91emac_halt(struct eth_device *netdev) { at91_emac_t *emac; emac = (at91_emac_t *) netdev->iobase; writel(readl(&emac->ctl) & ~(AT91_EMAC_CTL_TE | AT91_EMAC_CTL_RE), &emac->ctl); DEBUG_AT91EMAC("halt MAC\n"); } static int at91emac_send(struct eth_device *netdev, volatile void *packet, int length) { at91_emac_t *emac; emac = (at91_emac_t *) netdev->iobase; while (!(readl(&emac->tsr) & AT91_EMAC_TSR_BNQ)) ; writel((u32) packet, &emac->tar); writel(AT91_EMAC_TCR_LEN(length), &emac->tcr); while (AT91_EMAC_TCR_LEN(readl(&emac->tcr))) ; DEBUG_AT91EMAC("Send %d \n", length); writel(readl(&emac->tsr) | AT91_EMAC_TSR_COMP, &emac->tsr); return 0; } static int at91emac_recv(struct eth_device *netdev) { emac_device *dev; at91_emac_t *emac; rbf_t *rbfp; int size; emac = (at91_emac_t *) netdev->iobase; dev = (emac_device *) netdev->priv; rbfp = &dev->rbfdt[dev->rbindex]; while (rbfp->addr & RBF_OWNER) { size = rbfp->size & RBF_SIZE; NetReceive(NetRxPackets[dev->rbindex], size); DEBUG_AT91EMAC("Recv[%d]: %d bytes @ %x \n", dev->rbindex, size, rbfp->addr); rbfp->addr &= ~RBF_OWNER; rbfp->size = 0; if (dev->rbindex < (RBF_FRAMEMAX-1)) dev->rbindex++; else dev->rbindex = 0; rbfp = &(dev->rbfdt[dev->rbindex]); if (!(rbfp->addr & RBF_OWNER)) writel(readl(&emac->rsr) | AT91_EMAC_RSR_REC, &emac->rsr); } if (readl(&emac->isr) & AT91_EMAC_IxR_RBNA) { /* EMAC silicon bug 41.3.1 workaround 1 */ writel(readl(&emac->ctl) & ~AT91_EMAC_CTL_RE, &emac->ctl); writel(readl(&emac->ctl) | AT91_EMAC_CTL_RE, &emac->ctl); dev->rbindex = 0; printf("%s: reset receiver (EMAC dead lock bug)\n", netdev->name); } return 0; } static int at91emac_write_hwaddr(struct eth_device *netdev) { emac_device *dev; at91_emac_t *emac; at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; emac = (at91_emac_t *) netdev->iobase; dev = (emac_device *) netdev->priv; writel(1 << AT91_ID_EMAC, &pmc->pcer); DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), cpu_to_le32(*((u32 *)netdev->enetaddr))); writel(cpu_to_le32(*((u32 *)netdev->enetaddr)), &emac->sa2l); writel(cpu_to_le16(*((u16 *)(netdev->enetaddr + 4))), &emac->sa2h); DEBUG_AT91EMAC("init MAC-ADDR %x%x \n", readl(&emac->sa2h), readl(&emac->sa2l)); return 0; } int at91emac_register(bd_t *bis, unsigned long iobase) { emac_device *emac; emac_device *emacfix; struct eth_device *dev; if (iobase == 0) iobase = AT91_EMAC_BASE; emac = malloc(sizeof(*emac)+512); if (emac == NULL) return 1; dev = malloc(sizeof(*dev)); if (dev == NULL) { free(emac); return 1; } /* alignment as per Errata (64 bytes) is insufficient! */ emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00); memset(emacfix, 0, sizeof(emac_device)); memset(dev, 0, sizeof(*dev)); #ifndef CONFIG_RMII sprintf(dev->name, "AT91 EMAC"); #else sprintf(dev->name, "AT91 EMAC RMII"); #endif dev->iobase = iobase; dev->priv = emacfix; dev->init = at91emac_init; dev->halt = at91emac_halt; dev->send = at91emac_send; dev->recv = at91emac_recv; dev->write_hwaddr = at91emac_write_hwaddr; eth_register(dev); #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, at91emac_mii_read, at91emac_mii_write); #endif return 1; }