Freescale MCF54418TWR ColdFire Development Board ================================================ TsiChung Liew(Tsi-Chung.Liew@freescale.com) Created Mar 22, 2012 =========================================== Changed files: ============== - board/freescale/m54418twr/m54418twr.c Dram setup - board/freescale/m54418twr/Makefile Makefile - board/freescale/m54418twr/config.mk config make - board/freescale/m54418twr/u-boot.lds Linker description - arch/m68k/cpu/mcf5445x/cpu.c cpu specific code - arch/m68k/cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs - arch/m68k/cpu/mcf5445x/interrupts.c cpu specific interrupt support - arch/m68k/cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock - arch/m68k/cpu/mcf5445x/Makefile Makefile - arch/m68k/cpu/mcf5445x/config.mk config make - arch/m68k/cpu/mcf5445x/start.S start up assembly code - doc/README.m54418twr This readme file - drivers/net/mcffec.c ColdFire common FEC driver - drivers/net/mcfmii.c ColdFire common MII driver - drivers/serial/mcfuart.c ColdFire common UART driver - arch/m68k/include/asm/bitops.h Bit operation function export - arch/m68k/include/asm/byteorder.h Byte order functions - arch/m68k/include/asm/fec.h FEC structure and definition - arch/m68k/include/asm/global_data.h Global data structure - arch/m68k/include/asm/immap.h ColdFire specific header file and driver macros - arch/m68k/include/asm/immap_5441x.h mcf5441x specific header file - arch/m68k/include/asm/io.h io functions - arch/m68k/include/asm/m5441x.h mcf5441x specific header file - arch/m68k/include/asm/posix_types.h Posix - arch/m68k/include/asm/processor.h header file - arch/m68k/include/asm/ptrace.h Exception structure - arch/m68k/include/asm/rtc.h Realtime clock header file - arch/m68k/include/asm/string.h String function export - arch/m68k/include/asm/timer.h Timer structure and definition - arch/m68k/include/asm/types.h Data types definition - arch/m68k/include/asm/uart.h Uart structure and definition - arch/m68k/include/asm/u-boot.h u-boot structure - include/configs/M54418TWR.h Board specific configuration file - arch/m68k/lib/board.c board init function - arch/m68k/lib/cache.c - arch/m68k/lib/interrupts.c Coldfire common interrupt functions - arch/m68k/lib/time.c Timer functions (Dma timer and PIT) - arch/m68k/lib/traps.c Exception init code 1 MCF5441x specific Options/Settings ==================================== 1.1 pre-loader is no longer suppoer in thie coldfire family 1.2 Configuration settings for M54418TWR Development Board CONFIG_MCF5441x -- define for all MCF5441x CPUs CONFIG_M54418 -- define for all Freescale MCF54418 CPUs CONFIG_M54418TWR -- define for M54418TWR board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot CONFIG_MCFTMR -- define to use DMA timer CONFIG_SYS_IMMR -- define for MBAR offset CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc CONFIG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== 2.1. System memory map: MRAM: 0x00000000-0x0003FFFF (256KB) DDR: 0x40000000-0x47FFFFFF (128MB) SRAM: 0x80000000-0x8000FFFF (64KB) IP: 0xE0000000-0xFFFFFFFF (512MB) 3. COMPILATION ============== 3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF version) from codesourcery.com was used. Download it from: http://www.codesourcery.com/gnu_toolchains/coldfire/download.html 3.2 Compilation export CROSS_COMPILE=cross-compile-prefix cd u-boot make distclean make M54418TWR_config, or - default to spi serial flash boot, 50Mhz input clock make M54418TWR_nand_mii_config, or - default to nand flash boot, mii mode, 25Mhz input clock make M54418TWR_nand_rmii_config, or - default to nand flash boot, rmii mode, 50Mhz input clock make M54418TWR_nand_rmii_lowfreq_config, or - default to nand flash boot, rmii mode, 50Mhz input clock make M54418TWR_serial_mii_config, or - default to spi serial flash boot, 25Mhz input clock make M54418TWR_serial_rmii_config, or - default to spi serial flash boot, 50Mhz input clock make 4. SCREEN DUMP ============== 4.1 M54418TWR Development board Boot from NAND flash (NOTE: May not show exactly the same) U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54) CPU: Freescale MCF54418 (Mask:a3 Version:1) CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz INP CLK 50 MHz VCO CLK 500 MHz Board: Freescale MCF54418 Tower System SPI: ready DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: FEC0, FEC1 -> pri baudrate=115200 bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k ernel)ro,-(jffs2) console=ttyS0,115200 bootdelay=2 eth1addr=00:e0:0c:bc:e5:61 ethact=FEC0 ethaddr=00:e0:0c:bc:e5:60 fileaddr=40010000 filesize=27354 gatewayip=192.168.1.1 hostname=M54418TWR inpclk=50000000 ipaddr=192.168.1.2 load=tftp ${loadaddr} ${u-boot}; loadaddr=0x40010000 mem=129024k netdev=eth0 netmask=255.255.255.0 prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save serverip=192.168.1.1 stderr=serial stdin=serial stdout=serial u-boot=u-boot.bin upd=run load; run prog Environment size: 653/131068 bytes -> bdinfo memstart = 0x40000000 memsize = 0x08000000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 sramstart = 0x80000000 sramsize = 0x00010000 mbar = 0xFC000000 cpufreq = 250 MHz busfreq = 125 MHz flbfreq = 125 MHz inpfreq = 50 MHz vcofreq = 500 MHz ethaddr = 00:e0:0c:bc:e5:60 eth1addr = 00:e0:0c:bc:e5:61 ip_addr = 192.168.1.2 baudrate = 115200 bps -> help ? - alias for 'help' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootvx - Boot vxWorks from an ELF image cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation dcache - enable or disable data cache dhcp - boot image via network using DHCP/TFTP protocol echo - echo args to console editenv - edit environment variable env - environment handling commands exit - exit script false - do nothing, unsuccessfully go - start application at address 'addr' help - print command description/usage icache - enable or disable instruction cache iminfo - print header information for application image imxtract- extract a part of a multi-image itest - return true/false on integer compare loop - infinite loop on address range md - memory display mdio - MDIO utility commands mii - MII utility commands mm - memory modify (auto-incrementing address) mtest - simple RAM read/write test mw - memory write (fill) nand - NAND sub-system nb_update- Nand boot update program nboot - boot from NAND device nfs - boot image via network using NFS protocol nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables reginfo - print register information reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sf - SPI flash sub-system showvar - print local hushshell variables sleep - delay execution for some time source - run script from memory sspi - SPI utility command test - minimal test like /bin/sh tftpboot- boot image via network using TFTP protocol true - do nothing, successfully version - print monitor, compiler and linker version