This file contains basic information on the port of U-Boot to IPHASE4539 (Interphase 4539 T1/E1/J1 PMC Communications Controller). All the changes fit in the common U-Boot infrastructure, providing a new IPHASE4539-specific entry in makefiles. To build U-Boot for IPHASE4539, type "make IPHASE4539_config", edit the "include/config_IPHASE4539.h" file if necessary, then type "make". Common file modifications: -------------------------- The following common files have been modified by this project: (starting from the ppcboot-1.1.5/ directory) MAKEALL - IPHASE4539 entry added Makefile - IPHASE4539_config entry added New files: ---------- The following new files have been added by this project: (starting from the ppcboot-1.1.5/ directory) board/iphase4539/ - board-specific directory board/iphase4539/Makefile - board-specific makefile board/iphase4539/config.mk - config file board/iphase4539/flash.c - flash driver (for AM29LV033C) board/iphase4539/ppcboot.lds - linker script board/iphase4539/iphase4539.c - ioport and memory initialization include/config_IPHASE4539.h - main configuration file New configuration options: -------------------------- CONFIG_IPHASE4539 Main board-specific option (should be defined for IPHASE4539). Acceptance criteria tests: -------------------------- The following tests have been conducted to validate the port of U-Boot to IPHASE4539: 1. Operation on serial console: With SMC1 defined as console in the main configuration file, the U-Boot output appeared on the serial terminal connected to the 2.5mm stereo jack connector as follows: ------------------------------------------------------------------------------ => help autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol bootd - boot default, i.e., run 'bootcmd' cmp - memory compare coninfo - print console devices and informations cp - memory copy crc32 - checksum calculation dcache - enable or disable data cache echo - echo args to console erase - erase FLASH memory flinfo - print FLASH memory information go - start application at address 'addr' help - print online help icache - enable or disable instruction cache iminfo - print header information for application image loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loop - infinite loop on address range md - memory display mm - memory modify (auto-incrementing) mtest - simple RAM test mw - memory write (fill) nm - memory modify (constant address) printenv- print environment variables protect - enable or disable FLASH write protection rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time tftpboot- boot image via network using TFTP protocol and env variables ipaddr and serverip version - print monitor version ? - alias for 'help' => ------------------------------------------------------------------------------ 2. Flash driver operation The following sequence was performed to test the "flinfo" command: ------------------------------------------------------------------------------ => flinfo Bank # 1: AMD AM29LV033C (32 Mbit, uniform sectors) Size: 4 MB in 64 Sectors Sector Start Addresses: FF800000 (RO) FF810000 (RO) FF820000 FF830000 FF840000 FF850000 FF860000 FF870000 FF880000 FF890000 FF8A0000 FF8B0000 FF8C0000 FF8D0000 FF8E0000 FF8F0000 FF900000 FF910000 FF920000 FF930000 FF940000 FF950000 FF960000 FF970000 FF980000 FF990000 FF9A0000 FF9B0000 FF9C0000 FF9D0000 FF9E0000 FF9F0000 FFA00000 FFA10000 FFA20000 FFA30000 FFA40000 FFA50000 FFA60000 FFA70000 FFA80000 FFA90000 FFAA0000 FFAB0000 FFAC0000 FFAD0000 FFAE0000 FFAF0000 FFB00000 (RO) FFB10000 (RO) FFB20000 (RO) FFB30000 (RO) FFB40000 FFB50000 FFB60000 FFB70000 FFB80000 FFB90000 FFBA0000 FFBB0000 FFBC0000 FFBD0000 FFBE0000 FFBF0000 ------------------------------------------------------------------------------ Note: the Hardware Configuration Word (HWC) of the 8260 is on the first sector of the flash and should not be touched. The U-Boot environment variables are stored on second sector and U-Boot starts at the address 0xFFB00000. The following sequence was performed to test the erase command: ------------------------------------------------------------------------------ => cp 0 ff880000 10 Copy to Flash... done => md ff880000 20 ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => erase ff880000 ff88ffff Erase Flash from 0xff880000 to 0xff88ffff .. done Erased 1 sectors => md ff880000 ff880000: ffffffff ffffffff ffffffff ffffffff ................ ff880010: ffffffff ffffffff ffffffff ffffffff ................ ff880020: ffffffff ffffffff ffffffff ffffffff ................ ff880030: ffffffff ffffffff ffffffff ffffffff ................ ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => cp 0 ff880000 10 Copy to Flash... done => md ff880000 20 ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => erase 1:8 Erase Flash Sectors 8-8 in Bank # 1 .. done => md ff880000 20 ff880000: ffffffff ffffffff ffffffff ffffffff ................ ff880010: ffffffff ffffffff ffffffff ffffffff ................ ff880020: ffffffff ffffffff ffffffff ffffffff ................ ff880030: ffffffff ffffffff ffffffff ffffffff ................ ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => cp 0 ff880000 10 Copy to Flash... done => cp 0 ff890000 10 => md ff880000 20 ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => md ff890000 ff890000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x ff890010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x ff890020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. ff890030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x ff890040: ffffffff ffffffff ffffffff ffffffff ................ ff890050: ffffffff ffffffff ffffffff ffffffff ................ ff890060: ffffffff ffffffff ffffffff ffffffff ................ ff890070: ffffffff ffffffff ffffffff ffffffff ................ => erase 1:8-9 Erase Flash Sectors 8-9 in Bank # 1 .... done => md ff880000 20 ff880000: ffffffff ffffffff ffffffff ffffffff ................ ff880010: ffffffff ffffffff ffffffff ffffffff ................ ff880020: ffffffff ffffffff ffffffff ffffffff ................ ff880030: ffffffff ffffffff ffffffff ffffffff ................ ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => md ff890000 ff890000: ffffffff ffffffff ffffffff ffffffff ................ ff890010: ffffffff ffffffff ffffffff ffffffff ................ ff890020: ffffffff ffffffff ffffffff ffffffff ................ ff890030: ffffffff ffffffff ffffffff ffffffff ................ ff890040: ffffffff ffffffff ffffffff ffffffff ................ ff890050: ffffffff ffffffff ffffffff ffffffff ................ ff890060: ffffffff ffffffff ffffffff ffffffff ................ ff890070: ffffffff ffffffff ffffffff ffffffff ................ => ------------------------------------------------------------------------------ The following sequence was performed to test the Flash programming commands: ------------------------------------------------------------------------------ => erase ff880000 ff88ffff Erase Flash from 0xff880000 to 0xff88ffff .. done Erased 1 sectors => cp 0 ff880000 10 Copy to Flash... done => md 0 20 00000000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x 00000010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x 00000020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. 00000030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x 00000040: 3c83c000 2c040000 40823378 7c0000a6 <...,...@.3x|... 00000050: 60000030 7c1b03a6 3c00c000 600035ec `..0|...<...`.5. 00000060: 7c1a03a6 4c000064 00000000 00000000 |...L..d........ 00000070: 00000000 00000000 00000000 00000000 ................ => md ff880000 20 ff880000: ff000000 60000000 60000000 7c7f1b78 ....`...`...|..x ff880010: 7c9e2378 7cbd2b78 7cdc3378 7cfb3b78 |.#x|.+x|.3x|.;x ff880020: 3b000000 4811e0f5 48003719 480036a5 ;...H...H.7.H.6. ff880030: 480036f9 48003731 48005c5d 7c7a1b78 H.6.H.71H.\]|z.x ff880040: ffffffff ffffffff ffffffff ffffffff ................ ff880050: ffffffff ffffffff ffffffff ffffffff ................ ff880060: ffffffff ffffffff ffffffff ffffffff ................ ff880070: ffffffff ffffffff ffffffff ffffffff ................ => ------------------------------------------------------------------------------ The following sequence was performed to test storage of the environment variables in Flash: ------------------------------------------------------------------------------ => setenv foo bar => saveenv Un-Protected 1 sectors Erasing Flash... .. done Erased 1 sectors Saving Environment to Flash... Protected 1 sectors => reset ... => printenv ... foo=bar ... Environment size: 339/65532 bytes => ------------------------------------------------------------------------------ The following sequence was performed to test image download and run over Ethernet interface (both interfaces were tested): ------------------------------------------------------------------------------ => tftpboot 40000 hello_world.bin ARP broadcast 1 TFTP from server 10.0.0.1; our IP address is 10.0.0.8 Filename 'hello_world.bin'. Load address: 0x40000 Loading: ############# done Bytes transferred = 65932 (1018c hex) => go 40004 ## Starting application at 0x00040004 ... Hello World argc = 1 argv[0] = "40004" argv[1] = "<NULL>" Hit any key to exit ... ## Application terminated, rc = 0x0 => ------------------------------------------------------------------------------ 3. Known Problems None for the moment. ---------------------------------------------------------------------------- U-Boot and Linux for Interphase 4539 T1/E1/J1 PMC Communications Controller ---------------------------------------------------------------------------- U-Boot: Configure and make U-Boot: $ cd <path>/u-boot $ make IPHASE4539_config $ make dep $ make $ cp -p u-boot.bin /tftpboot Load u-boot.bin into the Flash memory at 0xffb00000. Linux: Configure and make Linux: $ cd <patch>/linux-2.4 $ make IPHASE4539_config $ make oldconfig $ make dep $ make uImage $ cp -p arch/ppc/mbxboot/uImage /tftpboot Load uImage via tftp and boot it. Flash organisation: The following preliminary layout of the Flash memory is defined: 0xff800000 ( 0 - 64 kB): Hardware Configuration Word. 0xff810000 ( 64 kB - 128 kB): U-Boot Environment. 0xff820000 ( 128 kB - 3 MB): RAMdisk. 0xffb00000 ( 3 MB - 3328 kB): U-Boot. 0xffb40000 (3328 KB - 4 MB): Linux Kernel. For further information concerning U-Boot and Linux please consult the "DENX U-Boot and Linux Guide". (C) 2002 Wolfgang Grandegger, DENX Software Engineering, wg@denx.de ===================================================================