/* * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de> * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /*------------------------------------------------------------------------------+ * * This source code has been made available to you by IBM on an AS-IS * basis. Anyone receiving this source is licensed under IBM * copyrights to use it in any way he or she deems fit, including * copying it, modifying it, compiling it, and redistributing it either * with or without modifications. No license under IBM patents or * patent applications is to be implied by the copyright license. * * Any user of this software should understand that IBM cannot provide * technical support for this software and will not be responsible for * any consequences resulting from the use of this software. * * Any person who transfers this source code or any derivative work * must include the IBM copyright notice, this paragraph, and the * preceding two paragraphs in the transferred software. * * COPYRIGHT I B M CORPORATION 1995 * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M *------------------------------------------------------------------------------- */ /* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards * * * The processor starts at 0xfffffffc and the code is executed * from flash/rom. * in memory, but as long we don't jump around before relocating. * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. * This works because the cpu gives the FLASH (CS0) the whole * address space at startup, and board_init lies as a echo of * the flash somewhere up there in the memorymap. * * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ #include <config.h> #include <ppc4xx.h> #include <version.h> #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> #include <asm/cache.h> #include <asm/mmu.h> #include <asm/ppc4xx-isram.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif #ifdef CONFIG_SYS_INIT_DCACHE_CS # if (CONFIG_SYS_INIT_DCACHE_CS == 0) # define PBxAP pb0ap # define PBxCR pb0cr # if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB0AP # define PBxCR_VAL CONFIG_SYS_EBC_PB0CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 1) # define PBxAP pb1ap # define PBxCR pb1cr # if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB1AP # define PBxCR_VAL CONFIG_SYS_EBC_PB1CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 2) # define PBxAP pb2ap # define PBxCR pb2cr # if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB2AP # define PBxCR_VAL CONFIG_SYS_EBC_PB2CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 3) # define PBxAP pb3ap # define PBxCR pb3cr # if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB3AP # define PBxCR_VAL CONFIG_SYS_EBC_PB3CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 4) # define PBxAP pb4ap # define PBxCR pb4cr # if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB4AP # define PBxCR_VAL CONFIG_SYS_EBC_PB4CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 5) # define PBxAP pb5ap # define PBxCR pb5cr # if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB5AP # define PBxCR_VAL CONFIG_SYS_EBC_PB5CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 6) # define PBxAP pb6ap # define PBxCR pb6cr # if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB6AP # define PBxCR_VAL CONFIG_SYS_EBC_PB6CR # endif # endif # if (CONFIG_SYS_INIT_DCACHE_CS == 7) # define PBxAP pb7ap # define PBxCR pb7cr # if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR)) # define PBxAP_VAL CONFIG_SYS_EBC_PB7AP # define PBxCR_VAL CONFIG_SYS_EBC_PB7CR # endif # endif # ifndef PBxAP_VAL # define PBxAP_VAL 0 # endif # ifndef PBxCR_VAL # define PBxCR_VAL 0 # endif /* * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB * used as temporary stack pointer for the primordial stack */ # ifndef CONFIG_SYS_INIT_DCACHE_PBxAR # define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(7) | \ EBC_BXAP_BCE_DISABLE | \ EBC_BXAP_BCT_2TRANS | \ EBC_BXAP_CSN_ENCODE(0) | \ EBC_BXAP_OEN_ENCODE(0) | \ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(2) | \ EBC_BXAP_RE_DISABLED | \ EBC_BXAP_SOR_NONDELAYED | \ EBC_BXAP_BEM_WRITEONLY | \ EBC_BXAP_PEN_DISABLED) # endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */ # ifndef CONFIG_SYS_INIT_DCACHE_PBxCR # define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \ EBC_BXCR_BS_64MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_16BIT) # endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */ # ifndef CONFIG_SYS_INIT_RAM_PATTERN # define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD # endif #endif /* CONFIG_SYS_INIT_DCACHE_CS */ #if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10))) #error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END! #endif /* * Unless otherwise overriden, enable two 128MB cachable instruction regions * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions. */ #if !defined(CONFIG_SYS_FLASH_BASE) /* If not already defined, set it to the "last" 128MByte region */ # define CONFIG_SYS_FLASH_BASE 0xf8000000 #endif #if !defined(CONFIG_SYS_ICACHE_SACR_VALUE) # define CONFIG_SYS_ICACHE_SACR_VALUE \ (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \ PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \ PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE)) #endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */ #if !defined(CONFIG_SYS_DCACHE_SACR_VALUE) # define CONFIG_SYS_DCACHE_SACR_VALUE \ (0x00000000) #endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */ #define function_prolog(func_name) .text; \ .align 2; \ .globl func_name; \ func_name: #define function_epilog(func_name) .type func_name,@function; \ .size func_name,.-func_name /* We don't want the MMU yet. */ #undef MSR_KERNEL #define MSR_KERNEL ( MSR_ME ) /* Machine Check */ .extern ext_bus_cntlr_init #ifdef CONFIG_NAND_U_BOOT .extern reconfig_tlb0 #endif /* * Set up GOT: Global Offset Table * * Use r14 to access the GOT */ #if !defined(CONFIG_NAND_SPL) START_GOT GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) GOT_ENTRY(_end) GOT_ENTRY(__bss_start) END_GOT #endif /* CONFIG_NAND_SPL */ #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) /* * NAND U-Boot image is started from offset 0 */ .text #if defined(CONFIG_440) bl reconfig_tlb0 #endif GET_GOT bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f #endif /* * 440 Startup -- on reset only the top 4k of the effective * address space is mapped in by an entry in the instruction * and data shadow TLB. The .bootpg section is located in the * top 4k & does only what's necessary to map in the the rest * of the boot rom. Once the boot rom is mapped in we can * proceed with normal startup. * * NOTE: CS0 only covers the top 2MB of the effective address * space after reset. */ #if defined(CONFIG_440) #if !defined(CONFIG_NAND_SPL) .section .bootpg,"ax" #endif .globl _start_440 /**************************************************************************/ _start_440: /*--------------------------------------------------------------------+ | 440EPX BUP Change - Hardware team request +--------------------------------------------------------------------*/ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) sync nop nop #endif /*----------------------------------------------------------------+ | Core bug fix. Clear the esr +-----------------------------------------------------------------*/ li r0,0 mtspr esr,r0 /*----------------------------------------------------------------*/ /* Clear and set up some registers. */ /*----------------------------------------------------------------*/ iccci r0,r0 /* NOTE: operands not used for 440 */ dccci r0,r0 /* NOTE: operands not used for 440 */ sync li r0,0 mtspr srr0,r0 mtspr srr1,r0 mtspr csrr0,r0 mtspr csrr1,r0 /* NOTE: 440GX adds machine check status regs */ #if defined(CONFIG_440) && !defined(CONFIG_440GP) mtspr mcsrr0,r0 mtspr mcsrr1,r0 mfspr r1,mcsr mtspr mcsr,r1 #endif /*----------------------------------------------------------------*/ /* CCR0 init */ /*----------------------------------------------------------------*/ /* Disable store gathering & broadcast, guarantee inst/data * cache block touch, force load/store alignment * (see errata 1.12: 440_33) */ lis r1,0x0030 /* store gathering & broadcast disable */ ori r1,r1,0x6000 /* cache touch */ mtspr ccr0,r1 /*----------------------------------------------------------------*/ /* Initialize debug */ /*----------------------------------------------------------------*/ mfspr r1,dbcr0 andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */ bne skip_debug_init /* if set, don't clear debug register */ mtspr dbcr0,r0 mtspr dbcr1,r0 mtspr dbcr2,r0 mtspr iac1,r0 mtspr iac2,r0 mtspr iac3,r0 mtspr dac1,r0 mtspr dac2,r0 mtspr dvc1,r0 mtspr dvc2,r0 mfspr r1,dbsr mtspr dbsr,r1 /* Clear all valid bits */ skip_debug_init: #if defined (CONFIG_440SPE) /*----------------------------------------------------------------+ | Initialize Core Configuration Reg1. | a. ICDPEI: Record even parity. Normal operation. | b. ICTPEI: Record even parity. Normal operation. | c. DCTPEI: Record even parity. Normal operation. | d. DCDPEI: Record even parity. Normal operation. | e. DCUPEI: Record even parity. Normal operation. | f. DCMPEI: Record even parity. Normal operation. | g. FCOM: Normal operation | h. MMUPEI: Record even parity. Normal operation. | i. FFF: Flush only as much data as necessary. | j. TCS: Timebase increments from CPU clock. +-----------------------------------------------------------------*/ li r0,0 mtspr ccr1, r0 /*----------------------------------------------------------------+ | Reset the timebase. | The previous write to CCR1 sets the timebase source. +-----------------------------------------------------------------*/ mtspr tbl, r0 mtspr tbu, r0 #endif /*----------------------------------------------------------------*/ /* Setup interrupt vectors */ /*----------------------------------------------------------------*/ mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */ li r1,0x0100 mtspr ivor0,r1 /* Critical input */ li r1,0x0200 mtspr ivor1,r1 /* Machine check */ li r1,0x0300 mtspr ivor2,r1 /* Data storage */ li r1,0x0400 mtspr ivor3,r1 /* Instruction storage */ li r1,0x0500 mtspr ivor4,r1 /* External interrupt */ li r1,0x0600 mtspr ivor5,r1 /* Alignment */ li r1,0x0700 mtspr ivor6,r1 /* Program check */ li r1,0x0800 mtspr ivor7,r1 /* Floating point unavailable */ li r1,0x0c00 mtspr ivor8,r1 /* System call */ li r1,0x0a00 mtspr ivor9,r1 /* Auxiliary Processor unavailable */ li r1,0x0900 mtspr ivor10,r1 /* Decrementer */ li r1,0x1300 mtspr ivor13,r1 /* Data TLB error */ li r1,0x1400 mtspr ivor14,r1 /* Instr TLB error */ li r1,0x2000 mtspr ivor15,r1 /* Debug */ /*----------------------------------------------------------------*/ /* Configure cache regions */ /*----------------------------------------------------------------*/ mtspr inv0,r0 mtspr inv1,r0 mtspr inv2,r0 mtspr inv3,r0 mtspr dnv0,r0 mtspr dnv1,r0 mtspr dnv2,r0 mtspr dnv3,r0 mtspr itv0,r0 mtspr itv1,r0 mtspr itv2,r0 mtspr itv3,r0 mtspr dtv0,r0 mtspr dtv1,r0 mtspr dtv2,r0 mtspr dtv3,r0 /*----------------------------------------------------------------*/ /* Cache victim limits */ /*----------------------------------------------------------------*/ /* floors 0, ceiling max to use the entire cache -- nothing locked */ lis r1,0x0001 ori r1,r1,0xf800 mtspr ivlim,r1 mtspr dvlim,r1 /*----------------------------------------------------------------+ |Initialize MMUCR[STID] = 0. +-----------------------------------------------------------------*/ mfspr r0,mmucr addis r1,0,0xFFFF ori r1,r1,0xFF00 and r0,r0,r1 mtspr mmucr,r0 /*----------------------------------------------------------------*/ /* Clear all TLB entries -- TID = 0, TS = 0 */ /*----------------------------------------------------------------*/ addis r0,0,0x0000 li r1,0x003f /* 64 TLB entries */ mtctr r1 rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ tlbwe r0,r1,0x0001 tlbwe r0,r1,0x0002 subi r1,r1,0x0001 bdnz rsttlb /*----------------------------------------------------------------*/ /* TLB entry setup -- step thru tlbtab */ /*----------------------------------------------------------------*/ #if defined(CONFIG_440SPE) /*----------------------------------------------------------------*/ /* We have different TLB tables for revA and rev B of 440SPe */ /*----------------------------------------------------------------*/ mfspr r1, PVR lis r0,0x5342 ori r0,r0,0x1891 cmpw r7,r1,r0 bne r7,..revA bl tlbtabB b ..goon ..revA: bl tlbtabA ..goon: #else bl tlbtab /* Get tlbtab pointer */ #endif mr r5,r0 li r1,0x003f /* 64 TLB entries max */ mtctr r1 li r4,0 /* TLB # */ addi r5,r5,-4 1: lwzu r0,4(r5) cmpwi r0,0 beq 2f /* 0 marks end */ lwzu r1,4(r5) lwzu r2,4(r5) tlbwe r0,r4,0 /* TLB Word 0 */ tlbwe r1,r4,1 /* TLB Word 1 */ tlbwe r2,r4,2 /* TLB Word 2 */ addi r4,r4,1 /* Next TLB */ bdnz 1b /*----------------------------------------------------------------*/ /* Continue from 'normal' start */ /*----------------------------------------------------------------*/ 2: bl 3f b _start 3: li r0,0 mtspr srr1,r0 /* Keep things disabled for now */ mflr r1 mtspr srr0,r1 rfi #endif /* CONFIG_440 */ /* * r3 - 1st arg to board_init(): IMMP pointer * r4 - 2nd arg to board_init(): boot flag */ #ifndef CONFIG_NAND_SPL .text .long 0x27051956 /* U-Boot Magic Number */ .globl version_string version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" . = EXC_OFF_SYS_RESET .globl _start_of_vectors _start_of_vectors: /* Critical input. */ CRIT_EXCEPTION(0x100, CritcalInput, UnknownException) #ifdef CONFIG_440 /* Machine check */ MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException) #else CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) #endif /* CONFIG_440 */ /* Data Storage exception. */ STD_EXCEPTION(0x300, DataStorage, UnknownException) /* Instruction Storage exception. */ STD_EXCEPTION(0x400, InstStorage, UnknownException) /* External Interrupt exception. */ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) /* Alignment exception. */ . = 0x600 Alignment: EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR stw r5,_DSISR(r21) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ lwz r6,GOT(transfer_to_handler) mtlr r6 blrl .L_Alignment: .long AlignmentException - _start + _START_OFFSET .long int_return - _start + _START_OFFSET /* Program check exception */ . = 0x700 ProgramCheck: EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ lwz r6,GOT(transfer_to_handler) mtlr r6 blrl .L_ProgramCheck: .long ProgramCheckException - _start + _START_OFFSET .long int_return - _start + _START_OFFSET #ifdef CONFIG_440 STD_EXCEPTION(0x800, FPUnavailable, UnknownException) STD_EXCEPTION(0x900, Decrementer, DecrementerPITException) STD_EXCEPTION(0xa00, APU, UnknownException) #endif STD_EXCEPTION(0xc00, SystemCall, UnknownException) #ifdef CONFIG_440 STD_EXCEPTION(0x1300, DataTLBError, UnknownException) STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException) #else STD_EXCEPTION(0x1000, PIT, DecrementerPITException) STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) #endif CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) .globl _end_of_vectors _end_of_vectors: . = _START_OFFSET #endif .globl _start _start: /*****************************************************************************/ #if defined(CONFIG_440) /*----------------------------------------------------------------*/ /* Clear and set up some registers. */ /*----------------------------------------------------------------*/ li r0,0x0000 lis r1,0xffff mtspr dec,r0 /* prevent dec exceptions */ mtspr tbl,r0 /* prevent fit & wdt exceptions */ mtspr tbu,r0 mtspr tsr,r1 /* clear all timer exception status */ mtspr tcr,r0 /* disable all */ mtspr esr,r0 /* clear exception syndrome register */ mtxer r0 /* clear integer exception register */ /*----------------------------------------------------------------*/ /* Debug setup -- some (not very good) ice's need an event*/ /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */ /* value you need in this case 0x8cff 0000 should do the trick */ /*----------------------------------------------------------------*/ #if defined(CONFIG_SYS_INIT_DBCR) lis r1,0xffff ori r1,r1,0xffff mtspr dbsr,r1 /* Clear all status bits */ lis r0,CONFIG_SYS_INIT_DBCR@h ori r0,r0,CONFIG_SYS_INIT_DBCR@l mtspr dbcr0,r0 isync #endif /*----------------------------------------------------------------*/ /* Setup the internal SRAM */ /*----------------------------------------------------------------*/ li r0,0 #ifdef CONFIG_SYS_INIT_RAM_DCACHE /* Clear Dcache to use as RAM */ addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l addis r4,r0,CONFIG_SYS_INIT_RAM_END@h ori r4,r4,CONFIG_SYS_INIT_RAM_END@l rlwinm. r5,r4,0,27,31 rlwinm r5,r4,27,5,31 beq ..d_ran addi r5,r5,0x0001 ..d_ran: mtctr r5 ..d_ag: dcbz r0,r3 addi r3,r3,32 bdnz ..d_ag /* * Lock the init-ram/stack in d-cache, so that other regions * may use d-cache as well * Note, that this current implementation locks exactly 4k * of d-cache, so please make sure that you don't define a * bigger init-ram area. Take a look at the lwmon5 440EPx * implementation as a reference. */ msync isync /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */ lis r1,0x0201 ori r1,r1,0xf808 mtspr dvlim,r1 lis r1,0x0808 ori r1,r1,0x0808 mtspr dnv0,r1 mtspr dnv1,r1 mtspr dnv2,r1 mtspr dnv3,r1 mtspr dtv0,r1 mtspr dtv1,r1 mtspr dtv2,r1 mtspr dtv3,r1 msync isync #endif /* CONFIG_SYS_INIT_RAM_DCACHE */ /* 440EP & 440GR are only 440er PPC's without internal SRAM */ #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) /* not all PPC's have internal SRAM usable as L2-cache */ #if defined(CONFIG_440GX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460SX) mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */ #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) lis r1, 0x0000 ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */ mtdcr L2_CACHE_CFG,r1 #endif lis r2,0x7fff ori r2,r2,0xffff mfdcr r1,ISRAM0_DPC and r1,r1,r2 /* Disable parity check */ mtdcr ISRAM0_DPC,r1 mfdcr r1,ISRAM0_PMEG and r1,r1,r2 /* Disable pwr mgmt */ mtdcr ISRAM0_PMEG,r1 lis r1,0x8000 /* BAS = 8000_0000 */ #if defined(CONFIG_440GX) || defined(CONFIG_440SP) ori r1,r1,0x0980 /* first 64k */ mtdcr ISRAM0_SB0CR,r1 lis r1,0x8001 ori r1,r1,0x0980 /* second 64k */ mtdcr ISRAM0_SB1CR,r1 lis r1, 0x8002 ori r1,r1, 0x0980 /* third 64k */ mtdcr ISRAM0_SB2CR,r1 lis r1, 0x8003 ori r1,r1, 0x0980 /* fourth 64k */ mtdcr ISRAM0_SB3CR,r1 #elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT) lis r1,0x0000 /* BAS = X_0000_0000 */ ori r1,r1,0x0984 /* first 64k */ mtdcr ISRAM0_SB0CR,r1 lis r1,0x0001 ori r1,r1,0x0984 /* second 64k */ mtdcr ISRAM0_SB1CR,r1 lis r1, 0x0002 ori r1,r1, 0x0984 /* third 64k */ mtdcr ISRAM0_SB2CR,r1 lis r1, 0x0003 ori r1,r1, 0x0984 /* fourth 64k */ mtdcr ISRAM0_SB3CR,r1 #if defined(CONFIG_460EX) || defined(CONFIG_460GT) lis r2,0x7fff ori r2,r2,0xffff mfdcr r1,ISRAM1_DPC and r1,r1,r2 /* Disable parity check */ mtdcr ISRAM1_DPC,r1 mfdcr r1,ISRAM1_PMEG and r1,r1,r2 /* Disable pwr mgmt */ mtdcr ISRAM1_PMEG,r1 lis r1,0x0004 /* BAS = 4_0004_0000 */ ori r1,r1,0x0984 /* 64k */ mtdcr ISRAM1_SB0CR,r1 #endif #elif defined(CONFIG_460SX) lis r1,0x0000 /* BAS = 0000_0000 */ ori r1,r1,0x0B84 /* first 128k */ mtdcr ISRAM0_SB0CR,r1 lis r1,0x0001 ori r1,r1,0x0B84 /* second 128k */ mtdcr ISRAM0_SB1CR,r1 lis r1, 0x0002 ori r1,r1, 0x0B84 /* third 128k */ mtdcr ISRAM0_SB2CR,r1 lis r1, 0x0003 ori r1,r1, 0x0B84 /* fourth 128k */ mtdcr ISRAM0_SB3CR,r1 #elif defined(CONFIG_440GP) ori r1,r1,0x0380 /* 8k rw */ mtdcr ISRAM0_SB0CR,r1 mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */ #endif #endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */ /*----------------------------------------------------------------*/ /* Setup the stack in internal SRAM */ /*----------------------------------------------------------------*/ lis r1,CONFIG_SYS_INIT_RAM_ADDR@h ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l li r0,0 stwu r0,-4(r1) stwu r0,-4(r1) /* Terminate call chain */ stwu r1,-8(r1) /* Save back chain and move SP */ lis r0,RESET_VECTOR@h /* Address of reset vector */ ori r0,r0, RESET_VECTOR@l stwu r1,-8(r1) /* Save back chain and move SP */ stw r0,+12(r1) /* Save return addr (underflow vect) */ #ifdef CONFIG_NAND_SPL bl nand_boot_common /* will not return */ #else GET_GOT bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f #endif #endif /* CONFIG_440 */ /*****************************************************************************/ #ifdef CONFIG_IOP480 /*----------------------------------------------------------------------- */ /* Set up some machine state registers. */ /*----------------------------------------------------------------------- */ addi r0,r0,0x0000 /* initialize r0 to zero */ mtspr esr,r0 /* clear Exception Syndrome Reg */ mttcr r0 /* timer control register */ mtexier r0 /* disable all interrupts */ addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */ ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */ mtdbsr r4 /* clear/reset the dbsr */ mtexisr r4 /* clear all pending interrupts */ addis r4,r0,0x8000 mtexier r4 /* enable critical exceptions */ addis r4,r0,0x0000 /* assume 403GCX - enable core clk */ ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */ mtiocr r4 /* since bit not used) & DRC to latch */ /* data bus on rising edge of CAS */ /*----------------------------------------------------------------------- */ /* Clear XER. */ /*----------------------------------------------------------------------- */ mtxer r0 /*----------------------------------------------------------------------- */ /* Invalidate i-cache and d-cache TAG arrays. */ /*----------------------------------------------------------------------- */ addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */ addi r4,0,1024 /* 1/4 of I-cache */ ..cloop: iccci 0,r3 iccci r4,r3 dccci 0,r3 addic. r3,r3,-16 /* move back one cache line */ bne ..cloop /* loop back to do rest until r3 = 0 */ /* */ /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */ /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */ /* */ /* first copy IOP480 register base address into r3 */ addis r3,0,0x5000 /* IOP480 register base address hi */ /* ori r3,r3,0x0000 / IOP480 register base address lo */ #ifdef CONFIG_ADCIOP /* use r4 as the working variable */ /* turn on CS3 (LOCCTL.7) */ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */ andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */ #endif #ifdef CONFIG_DASA_SIM /* use r4 as the working variable */ /* turn on MA17 (LOCCTL.7) */ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */ ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */ #endif /* turn on MA16..13 (LCS0BRD.12 = 0) */ lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */ andi. r4,r4,0xefff /* make bit 12 = 0 */ stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */ /* make sure above stores all comlete before going on */ sync /* last thing, set local init status done bit (DEVINIT.31) */ lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */ oris r4,r4,0x8000 /* make bit 31 = 1 */ stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */ /* clear all pending interrupts and disable all interrupts */ li r4,-1 /* set p1 to 0xffffffff */ stw r4,0x1b0(r3) /* clear all pending interrupts */ stw r4,0x1b8(r3) /* clear all pending interrupts */ li r4,0 /* set r4 to 0 */ stw r4,0x1b4(r3) /* disable all interrupts */ stw r4,0x1bc(r3) /* disable all interrupts */ /* make sure above stores all comlete before going on */ sync /* Set-up icache cacheability. */ lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l mticcr r1 isync /* Set-up dcache cacheability. */ lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r1 addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */ li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ stwu r0, -4(r1) /* stack backtraces terminate cleanly */ GET_GOT /* initialize GOT access */ bl board_init_f /* run first part of init code (from Flash) */ #endif /* CONFIG_IOP480 */ /*****************************************************************************/ #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) /*----------------------------------------------------------------------- */ /* Clear and set up some registers. */ /*----------------------------------------------------------------------- */ addi r4,r0,0x0000 #if !defined(CONFIG_405EX) mtspr sgr,r4 #else /* * On 405EX, completely clearing the SGR leads to PPC hangup * upon PCIe configuration access. The PCIe memory regions * need to be guarded! */ lis r3,0x0000 ori r3,r3,0x7FFC mtspr sgr,r3 #endif mtspr dcwr,r4 mtesr r4 /* clear Exception Syndrome Reg */ mttcr r4 /* clear Timer Control Reg */ mtxer r4 /* clear Fixed-Point Exception Reg */ mtevpr r4 /* clear Exception Vector Prefix Reg */ addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */ /* dbsr is cleared by setting bits to 1) */ mtdbsr r4 /* clear/reset the dbsr */ /* Invalidate the i- and d-caches. */ bl invalidate_icache bl invalidate_dcache /* Set-up icache cacheability. */ lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l mticcr r4 isync /* Set-up dcache cacheability. */ lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r4 #if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\ && !defined (CONFIG_XILINX_405) /*----------------------------------------------------------------------- */ /* Tune the speed and size for flash CS0 */ /*----------------------------------------------------------------------- */ bl ext_bus_cntlr_init #endif #if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM)) /* * For boards that don't have OCM and can't use the data cache * for their primordial stack, setup stack here directly after the * SDRAM is initialized in ext_bus_cntlr_init. */ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */ li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ stwu r0, -4(r1) /* stack backtraces terminate cleanly */ /* * Set up a dummy frame to store reset vector as return address. * this causes stack underflow to reset board. */ stwu r1, -8(r1) /* Save back chain and move SP */ lis r0, RESET_VECTOR@h /* Address of reset vector */ ori r0, r0, RESET_VECTOR@l stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ #endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */ #if defined(CONFIG_405EP) /*----------------------------------------------------------------------- */ /* DMA Status, clear to come up clean */ /*----------------------------------------------------------------------- */ addis r3,r0, 0xFFFF /* Clear all existing DMA status */ ori r3,r3, 0xFFFF mtdcr dmasr, r3 bl ppc405ep_init /* do ppc405ep specific init */ #endif /* CONFIG_405EP */ #if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE) #if defined(CONFIG_405EZ) /******************************************************************** * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2 *******************************************************************/ /* * We can map the OCM on the PLB3, so map it at * CONFIG_SYS_OCM_DATA_ADDR + 0x8000 */ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ mtdcr ocmplb3cr1,r3 /* Set PLB Access */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ mtdcr ocmplb3cr2,r3 /* Set PLB Access */ isync lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ mtdcr ocmdscr1, r3 /* Set Data Side */ mtdcr ocmiscr1, r3 /* Set Instruction Side */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ mtdcr ocmdscr2, r3 /* Set Data Side */ mtdcr ocmiscr2, r3 /* Set Instruction Side */ addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ mtdcr ocmdsisdpc,r3 isync #else /* CONFIG_405EZ */ /******************************************************************** * Setup OCM - On Chip Memory *******************************************************************/ /* Setup OCM */ lis r0, 0x7FFF ori r0, r0, 0xFFFF mfdcr r3, ocmiscntl /* get instr-side IRAM config */ mfdcr r4, ocmdscntl /* get data-side IRAM config */ and r3, r3, r0 /* disable data-side IRAM */ and r4, r4, r0 /* disable data-side IRAM */ mtdcr ocmiscntl, r3 /* set instr-side IRAM config */ mtdcr ocmdscntl, r4 /* set data-side IRAM config */ isync lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l mtdcr ocmdsarc, r3 addis r4, 0, 0xC000 /* OCM data area enabled */ mtdcr ocmdscntl, r4 isync #endif /* CONFIG_405EZ */ #endif /*----------------------------------------------------------------------- */ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ /*----------------------------------------------------------------------- */ #ifdef CONFIG_SYS_INIT_DCACHE_CS li r4, PBxAP mtdcr ebccfga, r4 lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l mtdcr ebccfgd, r4 addi r4, 0, PBxCR mtdcr ebccfga, r4 lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l mtdcr ebccfgd, r4 /* * Enable the data cache for the 128MB storage access control region * at CONFIG_SYS_INIT_RAM_ADDR. */ mfdccr r4 oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l mtdccr r4 /* * Preallocate data cache lines to be used to avoid a subsequent * cache miss and an ensuing machine check exception when exceptions * are enabled. */ li r0, 0 lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l lis r4, CONFIG_SYS_INIT_RAM_END@h ori r4, r4, CONFIG_SYS_INIT_RAM_END@l /* * Convert the size, in bytes, to the number of cache lines/blocks * to preallocate. */ clrlwi. r5, r4, (32 - L1_CACHE_SHIFT) srwi r5, r4, L1_CACHE_SHIFT beq ..load_counter addi r5, r5, 0x0001 ..load_counter: mtctr r5 /* Preallocate the computed number of cache blocks. */ ..alloc_dcache_block: dcba r0, r3 addi r3, r3, L1_CACHE_BYTES bdnz ..alloc_dcache_block sync /* * Load the initial stack pointer and data area and convert the size, * in bytes, to the number of words to initialize to a known value. */ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l mtctr r4 lis r2, CONFIG_SYS_INIT_RAM_ADDR@h ori r2, r2, CONFIG_SYS_INIT_RAM_END@l lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l ..stackloop: stwu r4, -4(r2) bdnz ..stackloop /* * Make room for stack frame header and clear final stack frame so * that stack backtraces terminate cleanly. */ stwu r0, -4(r1) stwu r0, -4(r1) /* * Set up a dummy frame to store reset vector as return address. * this causes stack underflow to reset board. */ stwu r1, -8(r1) /* Save back chain and move SP */ addis r0, 0, RESET_VECTOR@h /* Address of reset vector */ ori r0, r0, RESET_VECTOR@l stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ #elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \ (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)) /* * Stack in OCM. */ /* Set up Stack at top of OCM */ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l /* Set up a zeroized stack frame so that backtrace works right */ li r0, 0 stwu r0, -4(r1) stwu r0, -4(r1) /* * Set up a dummy frame to store reset vector as return address. * this causes stack underflow to reset board. */ stwu r1, -8(r1) /* Save back chain and move SP */ lis r0, RESET_VECTOR@h /* Address of reset vector */ ori r0, r0, RESET_VECTOR@l stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ #endif /* CONFIG_SYS_INIT_DCACHE_CS */ #ifdef CONFIG_NAND_SPL bl nand_boot_common /* will not return */ #else GET_GOT /* initialize GOT access */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ /* NEVER RETURNS! */ bl board_init_f /* run first part of init code (from Flash) */ #endif /* CONFIG_NAND_SPL */ #endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ #ifndef CONFIG_NAND_SPL /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception. * Register r21 is pointer into trap frame, r1 has new stack pointer. */ .globl transfer_to_handler transfer_to_handler: stw r22,_NIP(r21) lis r22,MSR_POW@h andc r23,r23,r22 stw r23,_MSR(r21) SAVE_GPR(7, r21) SAVE_4GPRS(8, r21) SAVE_8GPRS(12, r21) SAVE_8GPRS(24, r21) mflr r23 andi. r24,r23,0x3f00 /* get vector offset */ stw r24,TRAP(r21) li r22,0 stw r22,RESULT(r21) mtspr SPRG2,r22 /* r1 is now kernel sp */ lwz r24,0(r23) /* virtual address of handler */ lwz r23,4(r23) /* where to go when done */ mtspr SRR0,r24 mtspr SRR1,r20 mtlr r23 SYNC rfi /* jump to handler, enable MMU */ int_return: mfmsr r28 /* Disable interrupts */ li r4,0 ori r4,r4,MSR_EE andc r28,r28,r4 SYNC /* Some chip revs need this... */ mtmsr r28 SYNC lwz r2,_CTR(r1) lwz r0,_LINK(r1) mtctr r2 mtlr r0 lwz r2,_XER(r1) lwz r0,_CCR(r1) mtspr XER,r2 mtcrf 0xFF,r0 REST_10GPRS(3, r1) REST_10GPRS(13, r1) REST_8GPRS(23, r1) REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) mtspr SRR0,r2 mtspr SRR1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfi crit_return: mfmsr r28 /* Disable interrupts */ li r4,0 ori r4,r4,MSR_EE andc r28,r28,r4 SYNC /* Some chip revs need this... */ mtmsr r28 SYNC lwz r2,_CTR(r1) lwz r0,_LINK(r1) mtctr r2 mtlr r0 lwz r2,_XER(r1) lwz r0,_CCR(r1) mtspr XER,r2 mtcrf 0xFF,r0 REST_10GPRS(3, r1) REST_10GPRS(13, r1) REST_8GPRS(23, r1) REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) mtspr csrr0,r2 mtspr csrr1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfci #ifdef CONFIG_440 mck_return: mfmsr r28 /* Disable interrupts */ li r4,0 ori r4,r4,MSR_EE andc r28,r28,r4 SYNC /* Some chip revs need this... */ mtmsr r28 SYNC lwz r2,_CTR(r1) lwz r0,_LINK(r1) mtctr r2 mtlr r0 lwz r2,_XER(r1) lwz r0,_CCR(r1) mtspr XER,r2 mtcrf 0xFF,r0 REST_10GPRS(3, r1) REST_10GPRS(13, r1) REST_8GPRS(23, r1) REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) mtspr mcsrr0,r2 mtspr mcsrr1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfmci #endif /* CONFIG_440 */ .globl get_pvr get_pvr: mfspr r3, PVR blr /*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ /*------------------------------------------------------------------------------- */ .globl out16 out16: sth r4,0x0000(r3) blr /*------------------------------------------------------------------------------- */ /* Function: out16r */ /* Description: Byte reverse and output 16 bits */ /*------------------------------------------------------------------------------- */ .globl out16r out16r: sthbrx r4,r0,r3 blr /*------------------------------------------------------------------------------- */ /* Function: out32r */ /* Description: Byte reverse and output 32 bits */ /*------------------------------------------------------------------------------- */ .globl out32r out32r: stwbrx r4,r0,r3 blr /*------------------------------------------------------------------------------- */ /* Function: in16 */ /* Description: Input 16 bits */ /*------------------------------------------------------------------------------- */ .globl in16 in16: lhz r3,0x0000(r3) blr /*------------------------------------------------------------------------------- */ /* Function: in16r */ /* Description: Input 16 bits and byte reverse */ /*------------------------------------------------------------------------------- */ .globl in16r in16r: lhbrx r3,r0,r3 blr /*------------------------------------------------------------------------------- */ /* Function: in32r */ /* Description: Input 32 bits and byte reverse */ /*------------------------------------------------------------------------------- */ .globl in32r in32r: lwbrx r3,r0,r3 blr /* * void relocate_code (addr_sp, gd, addr_moni) * * This "function" does not return, instead it continues in RAM * after relocating the monitor code. * * r3 = Relocated stack pointer * r4 = Relocated global data pointer * r5 = Relocated text pointer */ .globl relocate_code relocate_code: #if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) /* * We need to flush the initial global data (gd_t) before the dcache * will be invalidated. */ /* Save registers */ mr r9, r3 mr r10, r4 mr r11, r5 /* Flush initial global data range */ mr r3, r4 addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l bl flush_dcache_range #if defined(CONFIG_SYS_INIT_DCACHE_CS) /* * Undo the earlier data cache set-up for the primordial stack and * data area. First, invalidate the data cache and then disable data * cacheability for that area. Finally, restore the EBC values, if * any. */ /* Invalidate the primordial stack and data area in cache */ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l lis r4, CONFIG_SYS_INIT_RAM_END@h ori r4, r4, CONFIG_SYS_INIT_RAM_END@l add r4, r4, r3 bl invalidate_dcache_range /* Disable cacheability for the region */ mfdccr r3 lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l and r3, r3, r4 mtdccr r3 /* Restore the EBC parameters */ li r3, PBxAP mtdcr ebccfga, r3 lis r3, PBxAP_VAL@h ori r3, r3, PBxAP_VAL@l mtdcr ebccfgd, r3 li r3, PBxCR mtdcr ebccfga, r3 lis r3, PBxCR_VAL@h ori r3, r3, PBxCR_VAL@l mtdcr ebccfgd, r3 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ /* Restore registers */ mr r3, r9 mr r4, r10 mr r5, r11 #endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */ #ifdef CONFIG_SYS_INIT_RAM_DCACHE /* * Unlock the previously locked d-cache */ msync isync /* set TFLOOR/NFLOOR to 0 again */ lis r6,0x0001 ori r6,r6,0xf800 mtspr dvlim,r6 lis r6,0x0000 ori r6,r6,0x0000 mtspr dnv0,r6 mtspr dnv1,r6 mtspr dnv2,r6 mtspr dnv3,r6 mtspr dtv0,r6 mtspr dtv1,r6 mtspr dtv2,r6 mtspr dtv3,r6 msync isync #endif /* CONFIG_SYS_INIT_RAM_DCACHE */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_460SX) /* * On some 440er platforms the cache is enabled in the first TLB (Boot-CS) * to speed up the boot process. Now this cache needs to be disabled. */ iccci 0,0 /* Invalidate inst cache */ dccci 0,0 /* Invalidate data cache, now no longer our stack */ sync isync /* Clear all potential pending exceptions */ mfspr r1,mcsr mtspr mcsr,r1 #ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */ #else addi r1,r0,0x0000 /* Default TLB entry is #0 */ #endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */ tlbre r0,r1,0x0002 /* Read contents */ ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */ tlbwe r0,r1,0x0002 /* Save it out */ sync isync #endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */ mr r1, r3 /* Set new stack pointer */ mr r9, r4 /* Save copy of Init Data pointer */ mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, L1_CACHE_BYTES /* Cache Line Size */ /* * Fix GOT pointer: * * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address * * Offset: */ sub r15, r10, r4 /* First our own GOT */ add r14, r14, r15 /* then the one used by the C code */ add r30, r30, r15 /* * Now relocate code */ cmplw cr1,r3,r4 addi r0,r5,3 srwi. r0,r0,2 beq cr1,4f /* In place copy is not necessary */ beq 7f /* Protect against 0 count */ mtctr r0 bge cr1,2f la r8,-4(r4) la r7,-4(r3) 1: lwzu r0,4(r8) stwu r0,4(r7) bdnz 1b b 4f 2: slwi r0,r0,2 add r8,r4,r0 add r7,r3,r0 3: lwzu r0,-4(r8) stwu r0,-4(r7) bdnz 3b /* * Now flush the cache: note that we must start from a cache aligned * address. Otherwise we might miss one cache line. */ 4: cmpwi r6,0 add r5,r3,r5 beq 7f /* Always flush prefetch queue in any case */ subi r0,r6,1 andc r3,r3,r0 mr r4,r3 5: dcbst 0,r4 add r4,r4,r6 cmplw r4,r5 blt 5b sync /* Wait for all dcbst to complete on bus */ mr r4,r3 6: icbi 0,r4 add r4,r4,r6 cmplw r4,r5 blt 6b 7: sync /* Wait for all icbi to complete on bus */ isync /* * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ addi r0, r10, in_ram - _start + _START_OFFSET mtlr r0 blr /* NEVER RETURNS! */ in_ram: /* * Relocation Function, r14 point to got2+0x8000 * * Adjust got2 pointers, no need to check for 0, this code * already puts a few entries in the table. */ li r0,__got2_entries@sectoff@l la r3,GOT(_GOT2_TABLE_) lwz r11,GOT(_GOT2_TABLE_) mtctr r0 sub r11,r3,r11 addi r3,r3,-4 1: lwzu r0,4(r3) add r0,r0,r11 stw r0,0(r3) bdnz 1b /* * Now adjust the fixups and the pointers to the fixups * in case we need to move ourselves again. */ 2: li r0,__fixup_entries@sectoff@l lwz r3,GOT(_FIXUP_TABLE_) cmpwi r0,0 mtctr r0 addi r3,r3,-4 beq 4f 3: lwzu r4,4(r3) lwzux r0,r4,r11 add r0,r0,r11 stw r10,0(r3) stw r0,0(r4) bdnz 3b 4: clear_bss: /* * Now clear BSS segment */ lwz r3,GOT(__bss_start) lwz r4,GOT(_end) cmplw 0, r3, r4 beq 7f li r0, 0 andi. r5, r4, 3 beq 6f sub r4, r4, r5 mtctr r5 mr r5, r4 5: stb r0, 0(r5) addi r5, r5, 1 bdnz 5b 6: stw r0, 0(r3) addi r3, r3, 4 cmplw 0, r3, r4 bne 6b 7: mr r3, r9 /* Init Data pointer */ mr r4, r10 /* Destination Address */ bl board_init_r /* * Copy exception vector code to low memory * * r3: dest_addr * r7: source address, r8: end address, r9: target address */ .globl trap_init trap_init: lwz r7, GOT(_start_of_vectors) lwz r8, GOT(_end_of_vectors) li r9, 0x100 /* reset vector always at 0x100 */ cmplw 0, r7, r8 bgelr /* return if r7>=r8 - just in case */ mflr r4 /* save link register */ 1: lwz r0, 0(r7) stw r0, 0(r9) addi r7, r7, 4 addi r9, r9, 4 cmplw 0, r7, r8 bne 1b /* * relocate `hdlr' and `int_return' entries */ li r7, .L_MachineCheck - _start + _START_OFFSET li r8, Alignment - _start + _START_OFFSET 2: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 2b li r7, .L_Alignment - _start + _START_OFFSET bl trap_reloc li r7, .L_ProgramCheck - _start + _START_OFFSET bl trap_reloc #ifdef CONFIG_440 li r7, .L_FPUnavailable - _start + _START_OFFSET bl trap_reloc li r7, .L_Decrementer - _start + _START_OFFSET bl trap_reloc li r7, .L_APU - _start + _START_OFFSET bl trap_reloc li r7, .L_InstructionTLBError - _start + _START_OFFSET bl trap_reloc li r7, .L_DataTLBError - _start + _START_OFFSET bl trap_reloc #else /* CONFIG_440 */ li r7, .L_PIT - _start + _START_OFFSET bl trap_reloc li r7, .L_InstructionTLBMiss - _start + _START_OFFSET bl trap_reloc li r7, .L_DataTLBMiss - _start + _START_OFFSET bl trap_reloc #endif /* CONFIG_440 */ li r7, .L_DebugBreakpoint - _start + _START_OFFSET bl trap_reloc #if !defined(CONFIG_440) addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */ mtmsr r7 /* change MSR */ #else bl __440_msr_set b __440_msr_continue __440_msr_set: addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */ mtspr srr1,r7 mflr r7 mtspr srr0,r7 rfi __440_msr_continue: #endif mtlr r4 /* restore link register */ blr /* * Function: relocate entries for one exception vector */ trap_reloc: lwz r0, 0(r7) /* hdlr ... */ add r0, r0, r3 /* ... += dest_addr */ stw r0, 0(r7) lwz r0, 4(r7) /* int_return ... */ add r0, r0, r3 /* ... += dest_addr */ stw r0, 4(r7) blr #if defined(CONFIG_440) /*----------------------------------------------------------------------------+ | dcbz_area. +----------------------------------------------------------------------------*/ function_prolog(dcbz_area) rlwinm. r5,r4,0,27,31 rlwinm r5,r4,27,5,31 beq ..d_ra2 addi r5,r5,0x0001 ..d_ra2:mtctr r5 ..d_ag2:dcbz r0,r3 addi r3,r3,32 bdnz ..d_ag2 sync blr function_epilog(dcbz_area) #endif /* CONFIG_440 */ #endif /* CONFIG_NAND_SPL */ /*------------------------------------------------------------------------------- */ /* Function: in8 */ /* Description: Input 8 bits */ /*------------------------------------------------------------------------------- */ .globl in8 in8: lbz r3,0x0000(r3) blr /*------------------------------------------------------------------------------- */ /* Function: out8 */ /* Description: Output 8 bits */ /*------------------------------------------------------------------------------- */ .globl out8 out8: stb r4,0x0000(r3) blr /*------------------------------------------------------------------------------- */ /* Function: out32 */ /* Description: Output 32 bits */ /*------------------------------------------------------------------------------- */ .globl out32 out32: stw r4,0x0000(r3) blr /*------------------------------------------------------------------------------- */ /* Function: in32 */ /* Description: Input 32 bits */ /*------------------------------------------------------------------------------- */ .globl in32 in32: lwz 3,0x0000(3) blr /**************************************************************************/ /* PPC405EP specific stuff */ /**************************************************************************/ #ifdef CONFIG_405EP ppc405ep_init: #ifdef CONFIG_BUBINGA /* * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate * function) to support FPGA and NVRAM accesses below. */ lis r3,GPIO0_OSRH@h /* config GPIO output select */ ori r3,r3,GPIO0_OSRH@l lis r4,CONFIG_SYS_GPIO0_OSRH@h ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l stw r4,0(r3) lis r3,GPIO0_OSRL@h ori r3,r3,GPIO0_OSRL@l lis r4,CONFIG_SYS_GPIO0_OSRL@h ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l stw r4,0(r3) lis r3,GPIO0_ISR1H@h /* config GPIO input select */ ori r3,r3,GPIO0_ISR1H@l lis r4,CONFIG_SYS_GPIO0_ISR1H@h ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l stw r4,0(r3) lis r3,GPIO0_ISR1L@h ori r3,r3,GPIO0_ISR1L@l lis r4,CONFIG_SYS_GPIO0_ISR1L@h ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l stw r4,0(r3) lis r3,GPIO0_TSRH@h /* config GPIO three-state select */ ori r3,r3,GPIO0_TSRH@l lis r4,CONFIG_SYS_GPIO0_TSRH@h ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l stw r4,0(r3) lis r3,GPIO0_TSRL@h ori r3,r3,GPIO0_TSRL@l lis r4,CONFIG_SYS_GPIO0_TSRL@h ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l stw r4,0(r3) lis r3,GPIO0_TCR@h /* config GPIO driver output enables */ ori r3,r3,GPIO0_TCR@l lis r4,CONFIG_SYS_GPIO0_TCR@h ori r4,r4,CONFIG_SYS_GPIO0_TCR@l stw r4,0(r3) li r3,pb1ap /* program EBC bank 1 for RTC access */ mtdcr ebccfga,r3 lis r3,CONFIG_SYS_EBC_PB1AP@h ori r3,r3,CONFIG_SYS_EBC_PB1AP@l mtdcr ebccfgd,r3 li r3,pb1cr mtdcr ebccfga,r3 lis r3,CONFIG_SYS_EBC_PB1CR@h ori r3,r3,CONFIG_SYS_EBC_PB1CR@l mtdcr ebccfgd,r3 li r3,pb1ap /* program EBC bank 1 for RTC access */ mtdcr ebccfga,r3 lis r3,CONFIG_SYS_EBC_PB1AP@h ori r3,r3,CONFIG_SYS_EBC_PB1AP@l mtdcr ebccfgd,r3 li r3,pb1cr mtdcr ebccfga,r3 lis r3,CONFIG_SYS_EBC_PB1CR@h ori r3,r3,CONFIG_SYS_EBC_PB1CR@l mtdcr ebccfgd,r3 li r3,pb4ap /* program EBC bank 4 for FPGA access */ mtdcr ebccfga,r3 lis r3,CONFIG_SYS_EBC_PB4AP@h ori r3,r3,CONFIG_SYS_EBC_PB4AP@l mtdcr ebccfgd,r3 li r3,pb4cr mtdcr ebccfga,r3 lis r3,CONFIG_SYS_EBC_PB4CR@h ori r3,r3,CONFIG_SYS_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a ! CPU reset Otherwise, skip this step and keep going. ! Note: Running BIOS in bypass mode is not supported since PLB speed ! will not be fast enough for the SDRAM (min 66MHz) !----------------------------------------------------------------------- */ mfdcr r5, CPC0_PLLMR1 rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */ cmpi cr0,0,r4,0x1 beq pll_done /* if SSCS =b'1' then PLL has */ /* already been set */ /* and CPU has been reset */ /* so skip to next section */ #ifdef CONFIG_BUBINGA /* !----------------------------------------------------------------------- ! Read NVRAM to get value to write in PLLMR. ! If value has not been correctly saved, write default value ! Default config values (assuming on-board 33MHz SYS_CLK) are above. ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above. ! ! WARNING: This code assumes the first three words in the nvram_t ! structure in openbios.h. Changing the beginning of ! the structure will break this code. ! !----------------------------------------------------------------------- */ addis r3,0,NVRAM_BASE@h addi r3,r3,NVRAM_BASE@l lwz r4, 0(r3) addis r5,0,NVRVFY1@h addi r5,r5,NVRVFY1@l cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/ bne ..no_pllset addi r3,r3,4 lwz r4, 0(r3) addis r5,0,NVRVFY2@h addi r5,r5,NVRVFY2@l cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */ bne ..no_pllset addi r3,r3,8 /* Skip over conf_size */ lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */ lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */ rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */ cmpi cr0,0,r5,1 /* See if PLL is locked */ beq pll_write ..no_pllset: #endif /* CONFIG_BUBINGA */ #ifdef CONFIG_TAIHU mfdcr r4, CPC0_BOOT andi. r5, r4, CPC0_BOOT_SEP@l bne strap_1 /* serial eeprom present */ addis r5,0,CPLD_REG0_ADDR@h ori r5,r5,CPLD_REG0_ADDR@l andi. r5, r5, 0x10 bne _pci_66mhz #endif /* CONFIG_TAIHU */ #if defined(CONFIG_ZEUS) mfdcr r4, CPC0_BOOT andi. r5, r4, CPC0_BOOT_SEP@l bne strap_1 /* serial eeprom present */ lis r3,0x0000 addi r3,r3,0x3030 lis r4,0x8042 addi r4,r4,0x223e b 1f strap_1: mfdcr r3, CPC0_PLLMR0 mfdcr r4, CPC0_PLLMR1 b 1f #endif addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ ori r4,r4,PLLMR1_DEFAULT@l /* */ #ifdef CONFIG_TAIHU b 1f _pci_66mhz: addis r3,0,PLLMR0_DEFAULT_PCI66@h ori r3,r3,PLLMR0_DEFAULT_PCI66@l addis r4,0,PLLMR1_DEFAULT_PCI66@h ori r4,r4,PLLMR1_DEFAULT_PCI66@l b 1f strap_1: mfdcr r3, CPC0_PLLMR0 mfdcr r4, CPC0_PLLMR1 #endif /* CONFIG_TAIHU */ 1: b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: /* !----------------------------------------------------------------------- ! Clear Soft Reset Register ! This is needed to enable PCI if not booting from serial EPROM !----------------------------------------------------------------------- */ addi r3, 0, 0x0 mtdcr CPC0_SRR, r3 addis r3,0,0x0010 mtctr r3 pci_wait: bdnz pci_wait blr /* return to main code */ /* !----------------------------------------------------------------------------- ! Function: pll_write ! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation ! That is: ! 1. Pll is first disabled (de-activated by putting in bypass mode) ! 2. PLL is reset ! 3. Clock dividers are set while PLL is held in reset and bypassed ! 4. PLL Reset is cleared ! 5. Wait 100us for PLL to lock ! 6. A core reset is performed ! Input: r3 = Value to write to CPC0_PLLMR0 ! Input: r4 = Value to write to CPC0_PLLMR1 ! Output r3 = none !----------------------------------------------------------------------------- */ pll_write: mfdcr r5, CPC0_UCR andis. r5,r5,0xFFFF ori r5,r5,0x0101 /* Stop the UART clocks */ mtdcr CPC0_UCR,r5 /* Before changing PLL */ mfdcr r5, CPC0_PLLMR1 rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */ mtdcr CPC0_PLLMR1,r5 oris r5,r5,0x4000 /* Set PLL Reset */ mtdcr CPC0_PLLMR1,r5 mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */ rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */ oris r5,r5,0x4000 /* Set PLL Reset */ mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */ rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */ mtdcr CPC0_PLLMR1,r5 /* ! Wait min of 100us for PLL to lock. ! See CMOS 27E databook for more info. ! At 200MHz, that means waiting 20,000 instructions */ addi r3,0,20000 /* 2000 = 0x4e20 */ mtctr r3 pll_wait: bdnz pll_wait oris r5,r5,0x8000 /* Enable PLL */ mtdcr CPC0_PLLMR1,r5 /* Engage */ /* * Reset CPU to guarantee timings are OK * Not sure if this is needed... */ addis r3,0,0x1000 mtspr dbcr0,r3 /* This will cause a CPU core reset, and */ /* execution will continue from the poweron */ /* vector of 0xfffffffc */ #endif /* CONFIG_405EP */ #if defined(CONFIG_440) /*----------------------------------------------------------------------------+ | mttlb3. +----------------------------------------------------------------------------*/ function_prolog(mttlb3) TLBWE(4,3,2) blr function_epilog(mttlb3) /*----------------------------------------------------------------------------+ | mftlb3. +----------------------------------------------------------------------------*/ function_prolog(mftlb3) TLBRE(3,3,2) blr function_epilog(mftlb3) /*----------------------------------------------------------------------------+ | mttlb2. +----------------------------------------------------------------------------*/ function_prolog(mttlb2) TLBWE(4,3,1) blr function_epilog(mttlb2) /*----------------------------------------------------------------------------+ | mftlb2. +----------------------------------------------------------------------------*/ function_prolog(mftlb2) TLBRE(3,3,1) blr function_epilog(mftlb2) /*----------------------------------------------------------------------------+ | mttlb1. +----------------------------------------------------------------------------*/ function_prolog(mttlb1) TLBWE(4,3,0) blr function_epilog(mttlb1) /*----------------------------------------------------------------------------+ | mftlb1. +----------------------------------------------------------------------------*/ function_prolog(mftlb1) TLBRE(3,3,0) blr function_epilog(mftlb1) #endif /* CONFIG_440 */ #if defined(CONFIG_NAND_SPL) /* * void nand_boot_relocate(dst, src, bytes) * * r3 = Destination address to copy code to (in SDRAM) * r4 = Source address to copy code from * r5 = size to copy in bytes */ nand_boot_relocate: mr r6,r3 mr r7,r4 mflr r8 /* * Copy SPL from icache into SDRAM */ subi r3,r3,4 subi r4,r4,4 srwi r5,r5,2 mtctr r5 ..spl_loop: lwzu r0,4(r4) stwu r0,4(r3) bdnz ..spl_loop /* * Calculate "corrected" link register, so that we "continue" * in execution in destination range */ sub r3,r7,r6 /* r3 = src - dst */ sub r8,r8,r3 /* r8 = link-reg - (src - dst) */ mtlr r8 blr nand_boot_common: /* * First initialize SDRAM. It has to be available *before* calling * nand_boot(). */ lis r3,CONFIG_SYS_SDRAM_BASE@h ori r3,r3,CONFIG_SYS_SDRAM_BASE@l bl initdram /* * Now copy the 4k SPL code into SDRAM and continue execution * from there. */ lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l bl nand_boot_relocate /* * We're running from SDRAM now!!! * * It is necessary for 4xx systems to relocate from running at * the original location (0xfffffxxx) to somewhere else (SDRAM * preferably). This is because CS0 needs to be reconfigured for * NAND access. And we can't reconfigure this CS when currently * "running" from it. */ /* * Finally call nand_boot() to load main NAND U-Boot image from * NAND and jump to it. */ bl nand_boot /* will not return */ #endif /* CONFIG_NAND_SPL */