/*-----------------------------------------------------------------------------+ | | This source code has been made available to you by IBM on an AS-IS | basis. Anyone receiving this source is licensed under IBM | copyrights to use it in any way he or she deems fit, including | copying it, modifying it, compiling it, and redistributing it either | with or without modifications. No license under IBM patents or | patent applications is to be implied by the copyright license. | | Any user of this software should understand that IBM cannot provide | technical support for this software and will not be responsible for | any consequences resulting from the use of this software. | | Any person who transfers this source code or any derivative work | must include the IBM copyright notice, this paragraph, and the | preceding two paragraphs in the transferred software. | | COPYRIGHT I B M CORPORATION 1995 | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M +-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------+ | | File Name: miiphy.c | | Function: This module has utilities for accessing the MII PHY through | the EMAC3 macro. | | Author: Mark Wisner | | Change Activity- | | Date Description of Change BY | --------- --------------------- --- | 05-May-99 Created MKW | 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to | better match OPB speed. Also modified delay times. JWB | 29-Jul-99 Added Full duplex support MKW | 24-Aug-99 Removed printf from dp83843_duplex() JWB | 19-Jul-00 Ported to esd cpci405 sr | 23-Dec-03 Ported from miiphy.c to 440GX Travis Sawyer TBS | <travis.sawyer@sandburst.com> | +-----------------------------------------------------------------------------*/ #include <common.h> #include <asm/processor.h> #include <ppc_asm.tmpl> #include <commproc.h> #include <ppc4xx_enet.h> #include <405_mal.h> #include <miiphy.h> #undef ET_DEBUG /***********************************************************/ /* Dump out to the screen PHY regs */ /***********************************************************/ void miiphy_dump (char *devname, unsigned char addr) { unsigned long i; unsigned short data; for (i = 0; i < 0x1A; i++) { if (miiphy_read (devname, addr, i, &data)) { printf ("read error for reg %lx\n", i); return; } printf ("Phy reg %lx ==> %4x\n", i, data); /* jump to the next set of regs */ if (i == 0x07) i = 0x0f; } /* end for loop */ } /* end dump */ /***********************************************************/ /* (Re)start autonegotiation */ /***********************************************************/ int phy_setup_aneg (char *devname, unsigned char addr) { unsigned short ctl, adv; /* Setup standard advertise */ miiphy_read (devname, addr, PHY_ANAR, &adv); adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10); miiphy_write (devname, addr, PHY_ANAR, adv); miiphy_read (devname, addr, PHY_1000BTCR, &adv); adv |= (0x0300); miiphy_write (devname, addr, PHY_1000BTCR, adv); /* Start/Restart aneg */ miiphy_read (devname, addr, PHY_BMCR, &ctl); ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); miiphy_write (devname, addr, PHY_BMCR, ctl); return 0; } /***********************************************************/ /* read a phy reg and return the value with a rc */ /***********************************************************/ unsigned int miiphy_getemac_offset (void) { #if (defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)) && defined(CONFIG_NET_MULTI) unsigned long zmii; unsigned long eoffset; /* Need to find out which mdi port we're using */ zmii = in32 (ZMII_FER); if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) { /* using port 0 */ eoffset = 0; } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1))) { /* using port 1 */ eoffset = 0x100; } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2))) { /* using port 2 */ eoffset = 0x400; } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3))) { /* using port 3 */ eoffset = 0x600; } else { /* None of the mdi ports are enabled! */ /* enable port 0 */ zmii |= ZMII_FER_MDI << ZMII_FER_V (0); out32 (ZMII_FER, zmii); eoffset = 0; /* need to soft reset port 0 */ zmii = in32 (EMAC_M0); zmii |= EMAC_M0_SRST; out32 (EMAC_M0, zmii); } return (eoffset); #else return 0; #endif } int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg, unsigned short *value) { unsigned long sta_reg; /* STA scratch area */ unsigned long i; unsigned long emac_reg; emac_reg = miiphy_getemac_offset (); /* see if it is ready for 1000 nsec */ i = 0; /* see if it is ready for sec */ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) { #ifdef ET_DEBUG sta_reg = in32 (EMAC_STACR + emac_reg); printf ("read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ printf ("read err 1\n"); #endif return -1; } i++; } sta_reg = reg; /* reg address */ /* set clock (50Mhz) and read flags */ #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ; #else sta_reg |= EMAC_STACR_READ; #endif #else sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ; #endif #if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; #endif sta_reg = sta_reg | (addr << 5); /* Phy address */ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */ out32 (EMAC_STACR + emac_reg, sta_reg); #ifdef ET_DEBUG printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif sta_reg = in32 (EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif i = 0; while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) { return -1; } i++; sta_reg = in32 (EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif } if ((sta_reg & EMAC_STACR_PHYE) != 0) { return -1; } *value = *(short *) (&sta_reg); return 0; } /* phy_read */ /***********************************************************/ /* write a phy reg and return the value with a rc */ /***********************************************************/ int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg, unsigned short value) { unsigned long sta_reg; /* STA scratch area */ unsigned long i; unsigned long emac_reg; emac_reg = miiphy_getemac_offset (); /* see if it is ready for 1000 nsec */ i = 0; while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { if (i > 5) return -1; udelay (7); i++; } sta_reg = 0; sta_reg = reg; /* reg address */ /* set clock (50Mhz) and read flags */ #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE; #else sta_reg |= EMAC_STACR_WRITE; #endif #else sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ; #endif #if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */ #endif sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */ memcpy (&sta_reg, &value, 2); /* put in data */ out32 (EMAC_STACR + emac_reg, sta_reg); /* wait for completion */ i = 0; sta_reg = in32 (EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) return -1; i++; sta_reg = in32 (EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif } if ((sta_reg & EMAC_STACR_PHYE) != 0) return -1; return 0; } /* phy_write */