/* * (C) Copyright 2000-2007 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #if defined(CONFIG_405GP) || defined(CONFIG_405EP) DECLARE_GLOBAL_DATA_PTR; #endif #ifdef CFG_INIT_DCACHE_CS # if (CFG_INIT_DCACHE_CS == 0) # define PBxAP pb0ap # define PBxCR pb0cr # if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) # define PBxAP_VAL CFG_EBC_PB0AP # define PBxCR_VAL CFG_EBC_PB0CR # endif # endif # if (CFG_INIT_DCACHE_CS == 1) # define PBxAP pb1ap # define PBxCR pb1cr # if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR)) # define PBxAP_VAL CFG_EBC_PB1AP # define PBxCR_VAL CFG_EBC_PB1CR # endif # endif # if (CFG_INIT_DCACHE_CS == 2) # define PBxAP pb2ap # define PBxCR pb2cr # if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR)) # define PBxAP_VAL CFG_EBC_PB2AP # define PBxCR_VAL CFG_EBC_PB2CR # endif # endif # if (CFG_INIT_DCACHE_CS == 3) # define PBxAP pb3ap # define PBxCR pb3cr # if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR)) # define PBxAP_VAL CFG_EBC_PB3AP # define PBxCR_VAL CFG_EBC_PB3CR # endif # endif # if (CFG_INIT_DCACHE_CS == 4) # define PBxAP pb4ap # define PBxCR pb4cr # if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR)) # define PBxAP_VAL CFG_EBC_PB4AP # define PBxCR_VAL CFG_EBC_PB4CR # endif # endif # if (CFG_INIT_DCACHE_CS == 5) # define PBxAP pb5ap # define PBxCR pb5cr # if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR)) # define PBxAP_VAL CFG_EBC_PB5AP # define PBxCR_VAL CFG_EBC_PB5CR # endif # endif # if (CFG_INIT_DCACHE_CS == 6) # define PBxAP pb6ap # define PBxCR pb6cr # if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR)) # define PBxAP_VAL CFG_EBC_PB6AP # define PBxCR_VAL CFG_EBC_PB6CR # endif # endif # if (CFG_INIT_DCACHE_CS == 7) # define PBxAP pb7ap # define PBxCR pb7cr # if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR)) # define PBxAP_VAL CFG_EBC_PB7AP # define PBxCR_VAL CFG_EBC_PB7CR # endif # endif #endif /* CFG_INIT_DCACHE_CS */ #ifndef CFG_PLL_RECONFIG #define CFG_PLL_RECONFIG 0 #endif void reconfigure_pll(u32 new_cpu_freq) { #if defined(CONFIG_440EPX) int reset_needed = 0; u32 reg, temp; u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */ fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */ fbdv, target_fbdv, lfbdv, target_lfbdv, perdv0, target_perdv0, /* CLK_PERD */ spcid0, target_spcid0; /* CLK_SPCID */ /* Reconfigure clocks if necessary. * See PPC440EPx User's Manual, sections 8.2 and 14 */ if (new_cpu_freq == 667) { target_prbdv0 = 2; target_fwdva = 2; target_fwdvb = 4; target_fbdv = 20; target_lfbdv = 1; target_perdv0 = 4; target_spcid0 = 4; mfcpr(clk_primbd, reg); temp = (reg & PRBDV_MASK) >> 24; prbdv0 = temp ? temp : 8; if (prbdv0 != target_prbdv0) { reg &= ~PRBDV_MASK; reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24); mtcpr(clk_primbd, reg); reset_needed = 1; } mfcpr(clk_plld, reg); temp = (reg & PLLD_FWDVA_MASK) >> 16; fwdva = temp ? temp : 16; temp = (reg & PLLD_FWDVB_MASK) >> 8; fwdvb = temp ? temp : 8; temp = (reg & PLLD_FBDV_MASK) >> 24; fbdv = temp ? temp : 32; temp = (reg & PLLD_LFBDV_MASK); lfbdv = temp ? temp : 64; if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) { reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK | PLLD_FBDV_MASK | PLLD_LFBDV_MASK); reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) | ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) | ((target_fbdv == 32 ? 0 : target_fbdv) << 24) | (target_lfbdv == 64 ? 0 : target_lfbdv); mtcpr(clk_plld, reg); reset_needed = 1; } mfcpr(clk_perd, reg); perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24; if (perdv0 != target_perdv0) { reg &= ~CPR0_PERD_PERDV0_MASK; reg |= (target_perdv0 << 24); mtcpr(clk_perd, reg); reset_needed = 1; } mfcpr(clk_spcid, reg); temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24; spcid0 = temp ? temp : 4; if (spcid0 != target_spcid0) { reg &= ~CPR0_SPCID_SPCIDV0_MASK; reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24); mtcpr(clk_spcid, reg); reset_needed = 1; } /* Set reload inhibit so configuration will persist across * processor resets */ mfcpr(clk_icfg, reg); reg &= ~CPR0_ICFG_RLI_MASK; reg |= 1 << 31; mtcpr(clk_icfg, reg); } /* Reset processor if configuration changed */ if (reset_needed) { __asm__ __volatile__ ("sync; isync"); mtspr(dbcr0, 0x20000000); } #endif } /* * Breath some life into the CPU... * * Reconfigure PLL if necessary, * set up the memory map, * initialize a bunch of registers */ void cpu_init_f (void) { #if defined(CONFIG_WATCHDOG) unsigned long val; #endif reconfigure_pll(CFG_PLL_RECONFIG); #if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE) /* * GPIO0 setup (select GPIO or alternate function) */ #if defined(CFG_GPIO0_OR) out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output pins */ #endif #if defined(CFG_GPIO0_ODR) out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */ #endif out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */ out32(GPIO0_OSRL, CFG_GPIO0_OSRL); out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */ out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L); out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */ out32(GPIO0_TSRL, CFG_GPIO0_TSRL); #if defined(CFG_GPIO0_ISR2H) out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H); out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L); #endif #if defined (CFG_GPIO0_TCR) out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ #endif #if defined (CONFIG_405EP) /* * Set EMAC noise filter bits */ mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE); /* * Enable the internal PCI arbiter */ mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ #endif /* CONFIG_405EP */ #if defined(CFG_4xx_GPIO_TABLE) gpio_set_chip_configuration(); #endif /* CFG_4xx_GPIO_TABLE */ /* * External Bus Controller (EBC) Setup */ #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405)) /* * Move the next instructions into icache, since these modify the flash * we are running from! */ asm volatile(" bl 0f" ::: "lr"); asm volatile("0: mflr 3" ::: "r3"); asm volatile(" addi 4, 0, 14" ::: "r4"); asm volatile(" mtctr 4" ::: "ctr"); asm volatile("1: icbt 0, 3"); asm volatile(" addi 3, 3, 32" ::: "r3"); asm volatile(" bdnz 1b" ::: "ctr", "cr0"); asm volatile(" addis 3, 0, 0x0" ::: "r3"); asm volatile(" ori 3, 3, 0xA000" ::: "r3"); asm volatile(" mtctr 3" ::: "ctr"); asm volatile("2: bdnz 2b" ::: "ctr", "cr0"); #endif mtebc(pb0ap, CFG_EBC_PB0AP); mtebc(pb0cr, CFG_EBC_PB0CR); #endif #if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR) && !(CFG_INIT_DCACHE_CS == 1)) mtebc(pb1ap, CFG_EBC_PB1AP); mtebc(pb1cr, CFG_EBC_PB1CR); #endif #if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR) && !(CFG_INIT_DCACHE_CS == 2)) mtebc(pb2ap, CFG_EBC_PB2AP); mtebc(pb2cr, CFG_EBC_PB2CR); #endif #if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR) && !(CFG_INIT_DCACHE_CS == 3)) mtebc(pb3ap, CFG_EBC_PB3AP); mtebc(pb3cr, CFG_EBC_PB3CR); #endif #if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4)) mtebc(pb4ap, CFG_EBC_PB4AP); mtebc(pb4cr, CFG_EBC_PB4CR); #endif #if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR) && !(CFG_INIT_DCACHE_CS == 5)) mtebc(pb5ap, CFG_EBC_PB5AP); mtebc(pb5cr, CFG_EBC_PB5CR); #endif #if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR) && !(CFG_INIT_DCACHE_CS == 6)) mtebc(pb6ap, CFG_EBC_PB6AP); mtebc(pb6cr, CFG_EBC_PB6CR); #endif #if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR) && !(CFG_INIT_DCACHE_CS == 7)) mtebc(pb7ap, CFG_EBC_PB7AP); mtebc(pb7cr, CFG_EBC_PB7CR); #endif #if defined (CFG_EBC_CFG) mtebc(EBC0_CFG, CFG_EBC_CFG); #endif #if defined(CONFIG_WATCHDOG) val = mfspr(tcr); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ #elif defined(CONFIG_440EPX) val |= 0xb0000000; /* generate system reset after 1.34 seconds */ #else val |= 0xf0000000; /* generate system reset after 2.684 seconds */ #endif #if defined(CFG_4xx_RESET_TYPE) val &= ~0x30000000; /* clear WRC bits */ val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */ #endif mtspr(tcr, val); val = mfspr(tsr); val |= 0x80000000; /* enable watchdog timer */ mtspr(tsr, val); reset_4xx_watchdog(); #endif /* CONFIG_WATCHDOG */ } /* * initialize higher level parts of CPU like time base and timers */ int cpu_init_r (void) { #if defined(CONFIG_405GP) || defined(CONFIG_405EP) bd_t *bd = gd->bd; unsigned long reg; #if defined(CONFIG_405GP) uint pvr = get_pvr(); #endif #ifdef CFG_INIT_DCACHE_CS /* * Flush and invalidate dcache, then disable CS for temporary stack. * Afterwards, this CS can be used for other purposes */ dcache_disable(); /* flush and invalidate dcache */ mtebc(PBxAP, 0); mtebc(PBxCR, 0); /* disable CS for temporary stack */ #if (defined(PBxAP_VAL) && defined(PBxCR_VAL)) /* * Write new value into CS register */ mtebc(PBxAP, PBxAP_VAL); mtebc(PBxCR, PBxCR_VAL); #endif #endif /* CFG_INIT_DCACHE_CS */ /* * Write Ethernetaddress into on-chip register */ reg = 0x00000000; reg |= bd->bi_enetaddr[0]; /* set high address */ reg = reg << 8; reg |= bd->bi_enetaddr[1]; out32 (EMAC_IAH, reg); reg = 0x00000000; reg |= bd->bi_enetaddr[2]; /* set low address */ reg = reg << 8; reg |= bd->bi_enetaddr[3]; reg = reg << 8; reg |= bd->bi_enetaddr[4]; reg = reg << 8; reg |= bd->bi_enetaddr[5]; out32 (EMAC_IAL, reg); #if defined(CONFIG_405GP) /* * Set edge conditioning circuitry on PPC405GPr * for compatibility to existing PPC405GP designs. */ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) { mtdcr(ecr, 0x60606000); } #endif /* defined(CONFIG_405GP) */ #endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */ return (0); }