/*-----------------------------------------------------------------------------+ * * This source code has been made available to you by IBM on an AS-IS * basis. Anyone receiving this source is licensed under IBM * copyrights to use it in any way he or she deems fit, including * copying it, modifying it, compiling it, and redistributing it either * with or without modifications. No license under IBM patents or * patent applications is to be implied by the copyright license. * * Any user of this software should understand that IBM cannot provide * technical support for this software and will not be responsible for * any consequences resulting from the use of this software. * * Any person who transfers this source code or any derivative work * must include the IBM copyright notice, this paragraph, and the * preceding two paragraphs in the transferred software. * * COPYRIGHT I B M CORPORATION 1995 * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M *-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------+ * * File Name: enetemac.c * * Function: Device driver for the ethernet EMAC3 macro on the 405GP. * * Author: Mark Wisner * * Change Activity- * * Date Description of Change BY * --------- --------------------- --- * 05-May-99 Created MKW * 27-Jun-99 Clean up JWB * 16-Jul-99 Added MAL error recovery and better IP packet handling MKW * 29-Jul-99 Added Full duplex support MKW * 06-Aug-99 Changed names for Mal CR reg MKW * 23-Aug-99 Turned off SYE when running at 10Mbs MKW * 24-Aug-99 Marked descriptor empty after call_xlc MKW * 07-Sep-99 Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16 MCG * to avoid chaining maximum sized packets. Push starting * RX descriptor address up to the next cache line boundary. * 16-Jan-00 Added support for booting with IP of 0x0 MKW * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the * EMAC_RXM register. JWB * 12-Mar-01 anne-sophie.harnois@nextream.fr * - Variables are compatible with those already defined in * include/net.h * - Receive buffer descriptor ring is used to send buffers * to the user * - Info print about send/received/handled packet number if * INFO_405_ENET is set * 17-Apr-01 stefan.roese@esd-electronics.com * - MAL reset in "eth_halt" included * - Enet speed and duplex output now in one line * 08-May-01 stefan.roese@esd-electronics.com * - MAL error handling added (eth_init called again) * 13-Nov-01 stefan.roese@esd-electronics.com * - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex * 04-Jan-02 stefan.roese@esd-electronics.com * - Wait for PHY auto negotiation to complete added * 06-Feb-02 stefan.roese@esd-electronics.com * - Bug fixed in waiting for auto negotiation to complete * 26-Feb-02 stefan.roese@esd-electronics.com * - rx and tx buffer descriptors now allocated (no fixed address * used anymore) * 17-Jun-02 stefan.roese@esd-electronics.com * - MAL error debug printf 'M' removed (rx de interrupt may * occur upon many incoming packets with only 4 rx buffers). *-----------------------------------------------------------------------------* * 17-Nov-03 travis.sawyer@sandburst.com * - ported from 405gp_enet.c to utilized upto 4 EMAC ports * in the 440GX. This port should work with the 440GP * (2 EMACs) also * 15-Aug-05 sr@denx.de * - merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c now handling all 4xx cpu's. *-----------------------------------------------------------------------------*/ #include #include #include #include #include #include #include #include #include #include #include <405_mal.h> #include #include /* * Only compile for platform with AMCC EMAC ethernet controller and * network support enabled. * Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller! */ #if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480) #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) #error "CONFIG_MII has to be defined!" #endif #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_NET_MULTI) #error "CONFIG_NET_MULTI has to be defined for NetConsole" #endif #define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */ #define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* 5000 ms autonegotiate timeout */ /* Ethernet Transmit and Receive Buffers */ /* AS.HARNOIS * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from * PKTSIZE and PKTSIZE_ALIGN (include/net.h) */ #define ENET_MAX_MTU PKTSIZE #define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN /*-----------------------------------------------------------------------------+ * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal * Interrupt Controller). *-----------------------------------------------------------------------------*/ #define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE) #define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR) #define EMAC_UIC_DEF UIC_ENET #define EMAC_UIC_DEF1 UIC_ENET1 #define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET ) #undef INFO_4XX_ENET #define BI_PHYMODE_NONE 0 #define BI_PHYMODE_ZMII 1 #define BI_PHYMODE_RGMII 2 #define BI_PHYMODE_GMII 3 #define BI_PHYMODE_RTBI 4 #define BI_PHYMODE_TBI 5 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) #define BI_PHYMODE_SMII 6 #define BI_PHYMODE_MII 7 #if defined(CONFIG_460EX) || defined(CONFIG_460GT) #define BI_PHYMODE_RMII 8 #endif #endif #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) #define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) #define SDR0_ETH_CFG_CLK_SEL_V(n) (0x01 << (8 + n)) #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) #define MAL_RX_CHAN_MUL 8 /* 460EX/GT uses MAL channel 8 for EMAC1 */ #else #define MAL_RX_CHAN_MUL 1 #endif /*-----------------------------------------------------------------------------+ * Global variables. TX and RX descriptors and buffers. *-----------------------------------------------------------------------------*/ /* IER globals */ static uint32_t mal_ier; #if !defined(CONFIG_NET_MULTI) struct eth_device *emac0_dev = NULL; #endif /* * Get count of EMAC devices (doesn't have to be the max. possible number * supported by the cpu) * * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the * EMAC count is possible. As it is needed for the Kilauea/Haleakala * 405EX/405EXr eval board, using the same binary. */ #if defined(CONFIG_BOARD_EMAC_COUNT) #define LAST_EMAC_NUM board_emac_count() #else /* CONFIG_BOARD_EMAC_COUNT */ #if defined(CONFIG_HAS_ETH3) #define LAST_EMAC_NUM 4 #elif defined(CONFIG_HAS_ETH2) #define LAST_EMAC_NUM 3 #elif defined(CONFIG_HAS_ETH1) #define LAST_EMAC_NUM 2 #else #define LAST_EMAC_NUM 1 #endif #endif /* CONFIG_BOARD_EMAC_COUNT */ /* normal boards start with EMAC0 */ #if !defined(CONFIG_EMAC_NR_START) #define CONFIG_EMAC_NR_START 0 #endif #if defined(CONFIG_405EX) || defined(CONFIG_440EPX) #define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev))) #else #define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * 2)) #endif #define MAL_RX_DESC_SIZE 2048 #define MAL_TX_DESC_SIZE 2048 #define MAL_ALLOC_SIZE (MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE) /*-----------------------------------------------------------------------------+ * Prototypes and externals. *-----------------------------------------------------------------------------*/ static void enet_rcv (struct eth_device *dev, unsigned long malisr); int enetInt (struct eth_device *dev); static void mal_err (struct eth_device *dev, unsigned long isr, unsigned long uic, unsigned long maldef, unsigned long mal_errr); static void emac_err (struct eth_device *dev, unsigned long isr); extern int phy_setup_aneg (char *devname, unsigned char addr); extern int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg, unsigned short *value); extern int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg, unsigned short value); int board_emac_count(void); static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p) { #if defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_405EX) u32 val; mfsdr(sdr_mfr, val); val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); mtsdr(sdr_mfr, val); #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) u32 val; mfsdr(SDR0_ETH_CFG, val); val |= SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum); mtsdr(SDR0_ETH_CFG, val); #endif } static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) { #if defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_405EX) u32 val; mfsdr(sdr_mfr, val); val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); mtsdr(sdr_mfr, val); #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) u32 val; mfsdr(SDR0_ETH_CFG, val); val &= ~SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum); mtsdr(SDR0_ETH_CFG, val); #endif } /*-----------------------------------------------------------------------------+ | ppc_4xx_eth_halt | Disable MAL channel, and EMACn +-----------------------------------------------------------------------------*/ static void ppc_4xx_eth_halt (struct eth_device *dev) { EMAC_4XX_HW_PST hw_p = dev->priv; u32 val = 10000; out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) mtdcr (maltxcarr, (MAL_CR_MMSR >> (hw_p->devnum * 2))); #else mtdcr (maltxcarr, (MAL_CR_MMSR >> hw_p->devnum)); #endif mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum)); /* wait for reset */ while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ val--; if (val == 0) break; } /* provide clocks for EMAC internal loopback */ emac_loopback_enable(hw_p); /* EMAC RESET */ out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); /* remove clocks for EMAC internal loopback */ emac_loopback_disable(hw_p); #ifndef CONFIG_NETCONSOLE hw_p->print_speed = 1; /* print speed message again next time */ #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) /* don't bypass the TAHOE0/TAHOE1 cores for Linux */ mfsdr(SDR0_ETH_CFG, val); val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); mtsdr(SDR0_ETH_CFG, val); #endif return; } #if defined (CONFIG_440GX) int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) { unsigned long pfc1; unsigned long zmiifer; unsigned long rmiifer; mfsdr(sdr_pfc1, pfc1); pfc1 = SDR0_PFC1_EPS_DECODE(pfc1); zmiifer = 0; rmiifer = 0; switch (pfc1) { case 1: zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; case 2: zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; case 3: zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; bis->bi_phymode[2] = BI_PHYMODE_RGMII; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 4: zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (2); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_RGMII; bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; case 5: zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (2); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; case 6: zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_RGMII; break; case 0: default: zmiifer = ZMII_FER_MII << ZMII_FER_V(devnum); rmiifer = 0x0; bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; } /* Ensure we setup mdio for this devnum and ONLY this devnum */ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); out_be32((void *)ZMII_FER, zmiifer); out_be32((void *)RGMII_FER, rmiifer); return ((int)pfc1); } #endif /* CONFIG_440_GX */ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) { unsigned long zmiifer=0x0; unsigned long pfc1; mfsdr(sdr_pfc1, pfc1); pfc1 &= SDR0_PFC1_SELECT_MASK; switch (pfc1) { case SDR0_PFC1_SELECT_CONFIG_2: /* 1 x GMII port */ out_be32((void *)ZMII_FER, 0x00); out_be32((void *)RGMII_FER, 0x00000037); bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case SDR0_PFC1_SELECT_CONFIG_4: /* 2 x RGMII ports */ out_be32((void *)ZMII_FER, 0x00); out_be32((void *)RGMII_FER, 0x00000055); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; case SDR0_PFC1_SELECT_CONFIG_6: /* 2 x SMII ports */ out_be32((void *)ZMII_FER, ((ZMII_FER_SMII) << ZMII_FER_V(0)) | ((ZMII_FER_SMII) << ZMII_FER_V(1))); out_be32((void *)RGMII_FER, 0x00000000); bis->bi_phymode[0] = BI_PHYMODE_SMII; bis->bi_phymode[1] = BI_PHYMODE_SMII; break; case SDR0_PFC1_SELECT_CONFIG_1_2: /* only 1 x MII supported */ out_be32((void *)ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); out_be32((void *)RGMII_FER, 0x00000000); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; default: break; } /* Ensure we setup mdio for this devnum and ONLY this devnum */ zmiifer = in_be32((void *)ZMII_FER); zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); out_be32((void *)ZMII_FER, zmiifer); return ((int)0x0); } #endif /* CONFIG_440EPX */ #if defined(CONFIG_405EX) int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) { u32 rgmiifer = 0; /* * The 405EX(r)'s RGMII bridge can operate in one of several * modes, only one of which (2 x RGMII) allows the * simultaneous use of both EMACs on the 405EX. */ switch (CONFIG_EMAC_PHY_MODE) { case EMAC_PHY_MODE_NONE: /* No ports */ rgmiifer |= RGMII_FER_DIS << 0; rgmiifer |= RGMII_FER_DIS << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_NONE; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case EMAC_PHY_MODE_NONE_RGMII: /* 1 x RGMII port on channel 0 */ rgmiifer |= RGMII_FER_RGMII << 0; rgmiifer |= RGMII_FER_DIS << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case EMAC_PHY_MODE_RGMII_NONE: /* 1 x RGMII port on channel 1 */ rgmiifer |= RGMII_FER_DIS << 0; rgmiifer |= RGMII_FER_RGMII << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_NONE; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; case EMAC_PHY_MODE_RGMII_RGMII: /* 2 x RGMII ports */ rgmiifer |= RGMII_FER_RGMII << 0; rgmiifer |= RGMII_FER_RGMII << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; case EMAC_PHY_MODE_NONE_GMII: /* 1 x GMII port on channel 0 */ rgmiifer |= RGMII_FER_GMII << 0; rgmiifer |= RGMII_FER_DIS << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case EMAC_PHY_MODE_NONE_MII: /* 1 x MII port on channel 0 */ rgmiifer |= RGMII_FER_MII << 0; rgmiifer |= RGMII_FER_DIS << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case EMAC_PHY_MODE_GMII_NONE: /* 1 x GMII port on channel 1 */ rgmiifer |= RGMII_FER_DIS << 0; rgmiifer |= RGMII_FER_GMII << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_NONE; bis->bi_phymode[1] = BI_PHYMODE_GMII; break; case EMAC_PHY_MODE_MII_NONE: /* 1 x MII port on channel 1 */ rgmiifer |= RGMII_FER_DIS << 0; rgmiifer |= RGMII_FER_MII << 4; out_be32((void *)RGMII_FER, rgmiifer); bis->bi_phymode[0] = BI_PHYMODE_NONE; bis->bi_phymode[1] = BI_PHYMODE_MII; break; default: break; } /* Ensure we setup mdio for this devnum and ONLY this devnum */ rgmiifer = in_be32((void *)RGMII_FER); rgmiifer |= (1 << (19-devnum)); out_be32((void *)RGMII_FER, rgmiifer); return ((int)0x0); } #endif /* CONFIG_405EX */ #if defined(CONFIG_460EX) || defined(CONFIG_460GT) int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) { u32 eth_cfg; u32 zmiifer; /* ZMII0_FER reg. */ u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */ u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */ int mode; zmiifer = 0; rmiifer = 0; rmiifer1 = 0; #if defined(CONFIG_460EX) mode = 9; #else mode = 10; #endif /* TODO: * NOTE: 460GT has 2 RGMII bridge cores: * emac0 ------ RGMII0_BASE * | * emac1 -----+ * * emac2 ------ RGMII1_BASE * | * emac3 -----+ * * 460EX has 1 RGMII bridge core: * and RGMII1_BASE is disabled * emac0 ------ RGMII0_BASE * | * emac1 -----+ */ /* * Right now only 2*RGMII is supported. Please extend when needed. * sr - 2008-02-19 */ switch (mode) { case 1: /* 1 MII - 460EX */ /* GMC0 EMAC4_0, ZMII Bridge */ zmiifer |= ZMII_FER_MII << ZMII_FER_V(0); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; bis->bi_phymode[2] = BI_PHYMODE_NONE; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 2: /* 2 MII - 460GT */ /* GMC0 EMAC4_0, GMC1 EMAC4_2, ZMII Bridge */ zmiifer |= ZMII_FER_MII << ZMII_FER_V(0); zmiifer |= ZMII_FER_MII << ZMII_FER_V(2); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; bis->bi_phymode[2] = BI_PHYMODE_MII; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 3: /* 2 RMII - 460EX */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); bis->bi_phymode[0] = BI_PHYMODE_RMII; bis->bi_phymode[1] = BI_PHYMODE_RMII; bis->bi_phymode[2] = BI_PHYMODE_NONE; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 4: /* 4 RMII - 460GT */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC1 EMAC4_2, GMC1, EMAC4_3 */ /* ZMII Bridge */ zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_RMII; bis->bi_phymode[1] = BI_PHYMODE_RMII; bis->bi_phymode[2] = BI_PHYMODE_RMII; bis->bi_phymode[3] = BI_PHYMODE_RMII; break; case 5: /* 2 SMII - 460EX */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); bis->bi_phymode[0] = BI_PHYMODE_SMII; bis->bi_phymode[1] = BI_PHYMODE_SMII; bis->bi_phymode[2] = BI_PHYMODE_NONE; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 6: /* 4 SMII - 460GT */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC0 EMAC4_3, GMC0 EMAC4_3 */ /* ZMII Bridge */ zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_SMII; bis->bi_phymode[1] = BI_PHYMODE_SMII; bis->bi_phymode[2] = BI_PHYMODE_SMII; bis->bi_phymode[3] = BI_PHYMODE_SMII; break; case 7: /* This is the default mode that we want for board bringup - Maple */ /* 1 GMII - 460EX */ /* GMC0 EMAC4_0, RGMII Bridge 0 */ rmiifer |= RGMII_FER_MDIO(0); if (devnum == 0) { rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */ bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; bis->bi_phymode[2] = BI_PHYMODE_NONE; bis->bi_phymode[3] = BI_PHYMODE_NONE; } else { rmiifer |= RGMII_FER_GMII << RGMII_FER_V(3); /* CH1CFG - EMAC1 */ bis->bi_phymode[0] = BI_PHYMODE_NONE; bis->bi_phymode[1] = BI_PHYMODE_GMII; bis->bi_phymode[2] = BI_PHYMODE_NONE; bis->bi_phymode[3] = BI_PHYMODE_NONE; } break; case 8: /* 2 GMII - 460GT */ /* GMC0 EMAC4_0, RGMII Bridge 0 */ /* GMC1 EMAC4_2, RGMII Bridge 1 */ rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */ rmiifer1 |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC2 */ rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */ rmiifer1 |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC2 */ bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; bis->bi_phymode[2] = BI_PHYMODE_GMII; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 9: /* 2 RGMII - 460EX */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */ bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; bis->bi_phymode[2] = BI_PHYMODE_NONE; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 10: /* 4 RGMII - 460GT */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ /* GMC1 EMAC4_2, GMC1 EMAC4_3, RGMII Bridge 1 */ rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(2); rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; bis->bi_phymode[2] = BI_PHYMODE_RGMII; bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; default: break; } /* Set EMAC for MDIO */ mfsdr(SDR0_ETH_CFG, eth_cfg); eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0; mtsdr(SDR0_ETH_CFG, eth_cfg); out_be32((void *)RGMII_FER, rmiifer); #if defined(CONFIG_460GT) out_be32((void *)RGMII_FER + RGMII1_BASE_OFFSET, rmiifer1); #endif /* bypass the TAHOE0/TAHOE1 cores for U-Boot */ mfsdr(SDR0_ETH_CFG, eth_cfg); eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); mtsdr(SDR0_ETH_CFG, eth_cfg); return 0; } #endif /* CONFIG_460EX || CONFIG_460GT */ static inline void *malloc_aligned(u32 size, u32 align) { return (void *)(((u32)malloc(size + align) + align - 1) & ~(align - 1)); } static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) { int i; unsigned long reg = 0; unsigned long msr; unsigned long speed; unsigned long duplex; unsigned long failsafe; unsigned mode_reg; unsigned short devnum; unsigned short reg_short; #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) sys_info_t sysinfo; #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) int ethgroup = -1; #endif #endif u32 bd_cached; u32 bd_uncached = 0; #ifdef CONFIG_4xx_DCACHE static u32 last_used_ea = 0; #endif #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) int rgmii_channel; #endif EMAC_4XX_HW_PST hw_p = dev->priv; /* before doing anything, figure out if we have a MAC address */ /* if not, bail */ if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0) { printf("ERROR: ethaddr not set!\n"); return -1; } #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) /* Need to get the OPB frequency so we can access the PHY */ get_sys_info (&sysinfo); #endif msr = mfmsr (); mtmsr (msr & ~(MSR_EE)); /* disable interrupts */ devnum = hw_p->devnum; #ifdef INFO_4XX_ENET /* AS.HARNOIS * We should have : * hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it * is possible that new packets (without relationship with * current transfer) have got the time to arrived before * netloop calls eth_halt */ printf ("About preceeding transfer (eth%d):\n" "- Sent packet number %d\n" "- Received packet number %d\n" "- Handled packet number %d\n", hw_p->devnum, hw_p->stats.pkts_tx, hw_p->stats.pkts_rx, hw_p->stats.pkts_handled); hw_p->stats.pkts_tx = 0; hw_p->stats.pkts_rx = 0; hw_p->stats.pkts_handled = 0; hw_p->print_speed = 1; /* print speed message again next time */ #endif hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */ hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */ hw_p->rx_slot = 0; /* MAL Receive Slot */ hw_p->rx_i_index = 0; /* Receive Interrupt Queue Index */ hw_p->rx_u_index = 0; /* Receive User Queue Index */ hw_p->tx_slot = 0; /* MAL Transmit Slot */ hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */ hw_p->tx_u_index = 0; /* Transmit User Queue Index */ #if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) /* set RMII mode */ /* NOTE: 440GX spec states that mode is mutually exclusive */ /* NOTE: Therefore, disable all other EMACS, since we handle */ /* NOTE: only one emac at a time */ reg = 0; out_be32((void *)ZMII_FER, 0); udelay (100); #if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); #elif defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); #endif out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ #if defined(CONFIG_405EX) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); #endif sync(); /* provide clocks for EMAC internal loopback */ emac_loopback_enable(hw_p); /* EMAC RESET */ out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); /* remove clocks for EMAC internal loopback */ emac_loopback_disable(hw_p); failsafe = 1000; while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { udelay (1000); failsafe--; } if (failsafe <= 0) printf("\nProblem resetting EMAC!\n"); #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) /* Whack the M1 register */ mode_reg = 0x0; mode_reg &= ~0x00000038; if (sysinfo.freqOPB <= 50000000); else if (sysinfo.freqOPB <= 66666667) mode_reg |= EMAC_M1_OBCI_66; else if (sysinfo.freqOPB <= 83333333) mode_reg |= EMAC_M1_OBCI_83; else if (sysinfo.freqOPB <= 100000000) mode_reg |= EMAC_M1_OBCI_100; else mode_reg |= EMAC_M1_OBCI_GT100; out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ /* wait for PHY to complete auto negotiation */ reg_short = 0; #ifndef CONFIG_CS8952_PHY switch (devnum) { case 0: reg = CONFIG_PHY_ADDR; break; #if defined (CONFIG_PHY1_ADDR) case 1: reg = CONFIG_PHY1_ADDR; break; #endif #if defined (CONFIG_PHY2_ADDR) case 2: reg = CONFIG_PHY2_ADDR; break; #endif #if defined (CONFIG_PHY3_ADDR) case 3: reg = CONFIG_PHY3_ADDR; break; #endif default: reg = CONFIG_PHY_ADDR; break; } bis->bi_phynum[devnum] = reg; #if defined(CONFIG_PHY_RESET) /* * Reset the phy, only if its the first time through * otherwise, just check the speeds & feeds */ if (hw_p->first_init == 0) { #if defined(CONFIG_M88E1111_PHY) miiphy_write (dev->name, reg, 0x14, 0x0ce3); miiphy_write (dev->name, reg, 0x18, 0x4101); miiphy_write (dev->name, reg, 0x09, 0x0e00); miiphy_write (dev->name, reg, 0x04, 0x01e1); #endif miiphy_reset (dev->name, reg); #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) #if defined(CONFIG_CIS8201_PHY) /* * Cicada 8201 PHY needs to have an extended register whacked * for RGMII mode. */ if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) { #if defined(CONFIG_CIS8201_SHORT_ETCH) miiphy_write (dev->name, reg, 23, 0x1300); #else miiphy_write (dev->name, reg, 23, 0x1000); #endif /* * Vitesse VSC8201/Cicada CIS8201 errata: * Interoperability problem with Intel 82547EI phys * This work around (provided by Vitesse) changes * the default timer convergence from 8ms to 12ms */ miiphy_write (dev->name, reg, 0x1f, 0x2a30); miiphy_write (dev->name, reg, 0x08, 0x0200); miiphy_write (dev->name, reg, 0x1f, 0x52b5); miiphy_write (dev->name, reg, 0x02, 0x0004); miiphy_write (dev->name, reg, 0x01, 0x0671); miiphy_write (dev->name, reg, 0x00, 0x8fae); miiphy_write (dev->name, reg, 0x1f, 0x2a30); miiphy_write (dev->name, reg, 0x08, 0x0000); miiphy_write (dev->name, reg, 0x1f, 0x0000); /* end Vitesse/Cicada errata */ } #endif #if defined(CONFIG_ET1011C_PHY) /* * Agere ET1011c PHY needs to have an extended register whacked * for RGMII mode. */ if (((devnum == 2) || (devnum ==3)) && (4 == ethgroup)) { miiphy_read (dev->name, reg, 0x16, ®_short); reg_short &= ~(0x7); reg_short |= 0x6; /* RGMII DLL Delay*/ miiphy_write (dev->name, reg, 0x16, reg_short); miiphy_read (dev->name, reg, 0x17, ®_short); reg_short &= ~(0x40); miiphy_write (dev->name, reg, 0x17, reg_short); miiphy_write(dev->name, reg, 0x1c, 0x74f0); } #endif #endif /* Start/Restart autonegotiation */ phy_setup_aneg (dev->name, reg); udelay (1000); } #endif /* defined(CONFIG_PHY_RESET) */ miiphy_read (dev->name, reg, PHY_BMSR, ®_short); /* * Wait if PHY is capable of autonegotiation and autonegotiation is not complete */ if ((reg_short & PHY_BMSR_AUTN_ABLE) && !(reg_short & PHY_BMSR_AUTN_COMP)) { puts ("Waiting for PHY auto negotiation to complete"); i = 0; while (!(reg_short & PHY_BMSR_AUTN_COMP)) { /* * Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts (" TIMEOUT !\n"); break; } if ((i++ % 1000) == 0) { putc ('.'); } udelay (1000); /* 1 ms */ miiphy_read (dev->name, reg, PHY_BMSR, ®_short); } puts (" done\n"); udelay (500000); /* another 500 ms (results in faster booting) */ } #endif /* #ifndef CONFIG_CS8952_PHY */ speed = miiphy_speed (dev->name, reg); duplex = miiphy_duplex (dev->name, reg); if (hw_p->print_speed) { hw_p->print_speed = 0; printf ("ENET Speed is %d Mbps - %s duplex connection (EMAC%d)\n", (int) speed, (duplex == HALF) ? "HALF" : "FULL", hw_p->devnum); } #if defined(CONFIG_440) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ !defined(CONFIG_460EX) && !defined(CONFIG_460GT) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) mfsdr(sdr_mfr, reg); if (speed == 100) { reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M; } else { reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; } mtsdr(sdr_mfr, reg); #endif /* Set ZMII/RGMII speed according to the phy link speed */ reg = in_be32((void *)ZMII_SSR); if ( (speed == 100) || (speed == 1000) ) out_be32((void *)ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum))); else out_be32((void *)ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum)))); if ((devnum == 2) || (devnum == 3)) { if (speed == 1000) reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); else if (speed == 100) reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); else if (speed == 10) reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); else { printf("Error in RGMII Speed\n"); return -1; } out_be32((void *)RGMII_SSR, reg); } #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) if (devnum >= 2) rgmii_channel = devnum - 2; else rgmii_channel = devnum; if (speed == 1000) reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 100) reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 10) reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel)); else { printf("Error in RGMII Speed\n"); return -1; } out_be32((void *)RGMII_SSR, reg); #if defined(CONFIG_460GT) if ((devnum == 2) || (devnum == 3)) out_be32((void *)RGMII_SSR + RGMII1_BASE_OFFSET, reg); #endif #endif /* set the Mal configuration reg */ #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); #else mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); /* Errata 1.12: MAL_1 -- Disable MAL bursting */ if (get_pvr() == PVR_440GP_RB) { mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); } #endif /* * Malloc MAL buffer desciptors, make sure they are * aligned on cache line boundary size * (401/403/IOP480 = 16, 405 = 32) * and doesn't cross cache block boundaries. */ if (hw_p->first_init == 0) { debug("*** Allocating descriptor memory ***\n"); bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096); if (!bd_cached) { printf("%s: Error allocating MAL descriptor buffers!\n", __func__); return -1; } #ifdef CONFIG_4xx_DCACHE flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE); if (!last_used_ea) #if defined(CFG_MEM_TOP_HIDE) bd_uncached = bis->bi_memsize + CFG_MEM_TOP_HIDE; #else bd_uncached = bis->bi_memsize; #endif else bd_uncached = last_used_ea + MAL_ALLOC_SIZE; last_used_ea = bd_uncached; program_tlb(bd_cached, bd_uncached, MAL_ALLOC_SIZE, TLB_WORD2_I_ENABLE); #else bd_uncached = bd_cached; #endif hw_p->tx_phys = bd_cached; hw_p->rx_phys = bd_cached + MAL_TX_DESC_SIZE; hw_p->tx = (mal_desc_t *)(bd_uncached); hw_p->rx = (mal_desc_t *)(bd_uncached + MAL_TX_DESC_SIZE); debug("hw_p->tx=%08x, hw_p->rx=%08x\n", hw_p->tx, hw_p->rx); } for (i = 0; i < NUM_TX_BUFF; i++) { hw_p->tx[i].ctrl = 0; hw_p->tx[i].data_len = 0; if (hw_p->first_init == 0) hw_p->txbuf_ptr = malloc_aligned(MAL_ALLOC_SIZE, L1_CACHE_BYTES); hw_p->tx[i].data_ptr = hw_p->txbuf_ptr; if ((NUM_TX_BUFF - 1) == i) hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP; hw_p->tx_run[i] = -1; debug("TX_BUFF %d @ 0x%08lx\n", i, (u32)hw_p->tx[i].data_ptr); } for (i = 0; i < NUM_RX_BUFF; i++) { hw_p->rx[i].ctrl = 0; hw_p->rx[i].data_len = 0; hw_p->rx[i].data_ptr = (char *)NetRxPackets[i]; if ((NUM_RX_BUFF - 1) == i) hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP; hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; hw_p->rx_ready[i] = -1; debug("RX_BUFF %d @ 0x%08lx\n", i, (u32)hw_p->rx[i].data_ptr); } reg = 0x00000000; reg |= dev->enetaddr[0]; /* set high address */ reg = reg << 8; reg |= dev->enetaddr[1]; out_be32((void *)EMAC_IAH + hw_p->hw_addr, reg); reg = 0x00000000; reg |= dev->enetaddr[2]; /* set low address */ reg = reg << 8; reg |= dev->enetaddr[3]; reg = reg << 8; reg |= dev->enetaddr[4]; reg = reg << 8; reg |= dev->enetaddr[5]; out_be32((void *)EMAC_IAL + hw_p->hw_addr, reg); switch (devnum) { case 1: /* setup MAL tx & rx channel pointers */ #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) mtdcr (maltxctp2r, hw_p->tx_phys); #else mtdcr (maltxctp1r, hw_p->tx_phys); #endif #if defined(CONFIG_440) mtdcr (maltxbattr, 0x0); mtdcr (malrxbattr, 0x0); #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) mtdcr (malrxctp8r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16); #else mtdcr (malrxctp1r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16); #endif break; #if defined (CONFIG_440GX) case 2: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (malrxbattr, 0x0); mtdcr (maltxctp2r, hw_p->tx_phys); mtdcr (malrxctp2r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16); break; case 3: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (maltxctp3r, hw_p->tx_phys); mtdcr (malrxbattr, 0x0); mtdcr (malrxctp3r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_440GX */ #if defined (CONFIG_460GT) case 2: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (malrxbattr, 0x0); mtdcr (maltxctp2r, hw_p->tx_phys); mtdcr (malrxctp16r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16); break; case 3: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (malrxbattr, 0x0); mtdcr (maltxctp3r, hw_p->tx_phys); mtdcr (malrxctp24r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_460GT */ case 0: default: /* setup MAL tx & rx channel pointers */ #if defined(CONFIG_440) mtdcr (maltxbattr, 0x0); mtdcr (malrxbattr, 0x0); #endif mtdcr (maltxctp0r, hw_p->tx_phys); mtdcr (malrxctp0r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16); break; } /* Enable MAL transmit and receive channels */ #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2))); #else mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); #endif mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); /* set transmit enable & receive enable */ out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); /* set rx-/tx-fifo size */ mode_reg = (mode_reg & ~EMAC_MR1_FIFO_MASK) | EMAC_MR1_FIFO_SIZE; /* set speed */ if (speed == _1000BASET) { #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) unsigned long pfc1; mfsdr (sdr_pfc1, pfc1); pfc1 |= SDR0_PFC1_EM_1000; mtsdr (sdr_pfc1, pfc1); #endif mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST; } else if (speed == _100BASET) mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST; else mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */ if (duplex == FULL) mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST; out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); /* Enable broadcast and indvidual address */ /* TBS: enabling runts as some misbehaved nics will send runts */ out_be32((void *)EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); /* we probably need to set the tx mode1 reg? maybe at tx time */ /* set transmit request threshold register */ out_be32((void *)EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ #if defined(CONFIG_440) /* 440s has a 64 byte burst length */ out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); #else /* 405s have a 16 byte burst length */ out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); #endif /* defined(CONFIG_440) */ out_be32((void *)EMAC_TXM1 + hw_p->hw_addr, 0xf8640000); /* Set fifo limit entry in tx mode 0 */ out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, 0x00000003); /* Frame gap set */ out_be32((void *)EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); /* Set EMAC IER */ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; if (speed == _100BASET) hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; out_be32((void *)EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ out_be32((void *)EMAC_IER + hw_p->hw_addr, hw_p->emac_ier); if (hw_p->first_init == 0) { /* * Connect interrupt service routines */ irq_install_handler(ETH_IRQ_NUM(hw_p->devnum), (interrupt_handler_t *) enetInt, dev); } mtmsr (msr); /* enable interrupts again */ hw_p->bis = bis; hw_p->first_init = 1; return 0; } static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, int len) { struct enet_frame *ef_ptr; ulong time_start, time_now; unsigned long temp_txm0; EMAC_4XX_HW_PST hw_p = dev->priv; ef_ptr = (struct enet_frame *) ptr; /*-----------------------------------------------------------------------+ * Copy in our address into the frame. *-----------------------------------------------------------------------*/ (void) memcpy (ef_ptr->source_addr, dev->enetaddr, ENET_ADDR_LENGTH); /*-----------------------------------------------------------------------+ * If frame is too long or too short, modify length. *-----------------------------------------------------------------------*/ /* TBS: where does the fragment go???? */ if (len > ENET_MAX_MTU) len = ENET_MAX_MTU; /* memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */ memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len); flush_dcache_range((u32)hw_p->txbuf_ptr, (u32)hw_p->txbuf_ptr + len); /*-----------------------------------------------------------------------+ * set TX Buffer busy, and send it *-----------------------------------------------------------------------*/ hw_p->tx[hw_p->tx_slot].ctrl = (MAL_TX_CTRL_LAST | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) & ~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA); if ((NUM_TX_BUFF - 1) == hw_p->tx_slot) hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_WRAP; hw_p->tx[hw_p->tx_slot].data_len = (short) len; hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY; sync(); out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); #ifdef INFO_4XX_ENET hw_p->stats.pkts_tx++; #endif /*-----------------------------------------------------------------------+ * poll unitl the packet is sent and then make sure it is OK *-----------------------------------------------------------------------*/ time_start = get_timer (0); while (1) { temp_txm0 = in_be32((void *)EMAC_TXM0 + hw_p->hw_addr); /* loop until either TINT turns on or 3 seconds elapse */ if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) { /* transmit is done, so now check for errors * If there is an error, an interrupt should * happen when we return */ time_now = get_timer (0); if ((time_now - time_start) > 3000) { return (-1); } } else { return (len); } } } #if defined (CONFIG_440) || defined(CONFIG_405EX) #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* * Hack: On 440SP all enet irq sources are located on UIC1 * Needs some cleanup. --sr */ #define UIC0MSR uic1msr #define UIC0SR uic1sr #define UIC1MSR uic1msr #define UIC1SR uic1sr #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) /* * Hack: On 460EX/GT all enet irq sources are located on UIC2 * Needs some cleanup. --ag */ #define UIC0MSR uic2msr #define UIC0SR uic2sr #define UIC1MSR uic2msr #define UIC1SR uic2sr #else #define UIC0MSR uic0msr #define UIC0SR uic0sr #define UIC1MSR uic1msr #define UIC1SR uic1sr #endif #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_405EX) #define UICMSR_ETHX uic0msr #define UICSR_ETHX uic0sr #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) #define UICMSR_ETHX uic2msr #define UICSR_ETHX uic2sr #else #define UICMSR_ETHX uic1msr #define UICSR_ETHX uic1sr #endif int enetInt (struct eth_device *dev) { int serviced; int rc = -1; /* default to not us */ unsigned long mal_isr; unsigned long emac_isr = 0; unsigned long mal_rx_eob; unsigned long my_uic0msr, my_uic1msr; unsigned long my_uicmsr_ethx; #if defined(CONFIG_440GX) unsigned long my_uic2msr; #endif EMAC_4XX_HW_PST hw_p; /* * Because the mal is generic, we need to get the current * eth device */ #if defined(CONFIG_NET_MULTI) dev = eth_get_dev(); #else dev = emac0_dev; #endif hw_p = dev->priv; /* enter loop that stays in interrupt code until nothing to service */ do { serviced = 0; my_uic0msr = mfdcr (UIC0MSR); my_uic1msr = mfdcr (UIC1MSR); #if defined(CONFIG_440GX) my_uic2msr = mfdcr (uic2msr); #endif my_uicmsr_ethx = mfdcr (UICMSR_ETHX); if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) { /* not for us */ return (rc); } #if defined (CONFIG_440GX) if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) { /* not for us */ return (rc); } #endif /* get and clear controller status interrupts */ /* look at Mal and EMAC interrupts */ if ((my_uic0msr & (UIC_MRE | UIC_MTE)) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { /* we have a MAL interrupt */ mal_isr = mfdcr (malesr); /* look for mal error */ if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) { mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR); serviced = 1; rc = 0; } } /* port by port dispatch of emac interrupts */ if (hw_p->devnum == 0) { if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */ return (rc); /* we had errors so get out */ } } #if !defined(CONFIG_440SP) if (hw_p->devnum == 1) { if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */ return (rc); /* we had errors so get out */ } } #if defined (CONFIG_440GX) if (hw_p->devnum == 2) { if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (uic2sr, UIC_ETH2); return (rc); /* we had errors so get out */ } } if (hw_p->devnum == 3) { if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (uic2sr, UIC_ETH3); return (rc); /* we had errors so get out */ } } #endif /* CONFIG_440GX */ #endif /* !CONFIG_440SP */ /* handle MAX TX EOB interrupt from a tx */ if (my_uic0msr & UIC_MTE) { mal_rx_eob = mfdcr (maltxeobisr); mtdcr (maltxeobisr, mal_rx_eob); mtdcr (UIC0SR, UIC_MTE); } /* handle MAL RX EOB interupt from a receive */ /* check for EOB on valid channels */ if (my_uic0msr & UIC_MRE) { mal_rx_eob = mfdcr (malrxeobisr); if ((mal_rx_eob & (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) != 0) { /* call emac routine for channel x */ /* clear EOB mtdcr(malrxeobisr, mal_rx_eob); */ enet_rcv (dev, emac_isr); /* indicate that we serviced an interrupt */ serviced = 1; rc = 0; } } mtdcr (UIC0SR, UIC_MRE); /* Clear */ mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ switch (hw_p->devnum) { case 0: mtdcr (UICSR_ETHX, UIC_ETH0); break; case 1: mtdcr (UICSR_ETHX, UIC_ETH1); break; #if defined (CONFIG_440GX) case 2: mtdcr (uic2sr, UIC_ETH2); break; case 3: mtdcr (uic2sr, UIC_ETH3); break; #endif /* CONFIG_440GX */ default: break; } } while (serviced); return (rc); } #else /* CONFIG_440 */ int enetInt (struct eth_device *dev) { int serviced; int rc = -1; /* default to not us */ unsigned long mal_isr; unsigned long emac_isr = 0; unsigned long mal_rx_eob; unsigned long my_uicmsr; EMAC_4XX_HW_PST hw_p; /* * Because the mal is generic, we need to get the current * eth device */ #if defined(CONFIG_NET_MULTI) dev = eth_get_dev(); #else dev = emac0_dev; #endif hw_p = dev->priv; /* enter loop that stays in interrupt code until nothing to service */ do { serviced = 0; my_uicmsr = mfdcr (uicmsr); if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) { /* not for us */ return (rc); } /* get and clear controller status interrupts */ /* look at Mal and EMAC interrupts */ if ((MAL_UIC_DEF & my_uicmsr) != 0) { /* we have a MAL interrupt */ mal_isr = mfdcr (malesr); /* look for mal error */ if ((my_uicmsr & MAL_UIC_ERR) != 0) { mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR); serviced = 1; rc = 0; } } /* port by port dispatch of emac interrupts */ if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */ emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) { mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */ return (rc); /* we had errors so get out */ } /* handle MAX TX EOB interrupt from a tx */ if (my_uicmsr & UIC_MAL_TXEOB) { mal_rx_eob = mfdcr (maltxeobisr); mtdcr (maltxeobisr, mal_rx_eob); mtdcr (uicsr, UIC_MAL_TXEOB); } /* handle MAL RX EOB interupt from a receive */ /* check for EOB on valid channels */ if (my_uicmsr & UIC_MAL_RXEOB) { mal_rx_eob = mfdcr (malrxeobisr); if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */ /* clear EOB mtdcr(malrxeobisr, mal_rx_eob); */ enet_rcv (dev, emac_isr); /* indicate that we serviced an interrupt */ serviced = 1; rc = 0; } } mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */ #if defined(CONFIG_405EZ) mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT); #endif /* defined(CONFIG_405EZ) */ } while (serviced); return (rc); } #endif /* CONFIG_440 */ /*-----------------------------------------------------------------------------+ * MAL Error Routine *-----------------------------------------------------------------------------*/ static void mal_err (struct eth_device *dev, unsigned long isr, unsigned long uic, unsigned long maldef, unsigned long mal_errr) { EMAC_4XX_HW_PST hw_p = dev->priv; mtdcr (malesr, isr); /* clear interrupt */ /* clear DE interrupt */ mtdcr (maltxdeir, 0xC0000000); mtdcr (malrxdeir, 0x80000000); #ifdef INFO_4XX_ENET printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr); #endif eth_init (hw_p->bis); /* start again... */ } /*-----------------------------------------------------------------------------+ * EMAC Error Routine *-----------------------------------------------------------------------------*/ static void emac_err (struct eth_device *dev, unsigned long isr) { EMAC_4XX_HW_PST hw_p = dev->priv; printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); out_be32((void *)EMAC_ISR + hw_p->hw_addr, isr); } /*-----------------------------------------------------------------------------+ * enet_rcv() handles the ethernet receive data *-----------------------------------------------------------------------------*/ static void enet_rcv (struct eth_device *dev, unsigned long malisr) { struct enet_frame *ef_ptr; unsigned long data_len; unsigned long rx_eob_isr; EMAC_4XX_HW_PST hw_p = dev->priv; int handled = 0; int i; int loop_count = 0; rx_eob_isr = mfdcr (malrxeobisr); if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) { /* clear EOB */ mtdcr (malrxeobisr, rx_eob_isr); /* EMAC RX done */ while (1) { /* do all */ i = hw_p->rx_slot; if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl) || (loop_count >= NUM_RX_BUFF)) break; loop_count++; handled++; data_len = (unsigned long) hw_p->rx[i].data_len & 0x0fff; /* Get len */ if (data_len) { if (data_len > ENET_MAX_MTU) /* Check len */ data_len = 0; else { if (EMAC_RX_ERRORS & hw_p->rx[i].ctrl) { /* Check Errors */ data_len = 0; hw_p->stats.rx_err_log[hw_p-> rx_err_index] = hw_p->rx[i].ctrl; hw_p->rx_err_index++; if (hw_p->rx_err_index == MAX_ERR_LOG) hw_p->rx_err_index = 0; } /* emac_erros */ } /* data_len < max mtu */ } /* if data_len */ if (!data_len) { /* no data */ hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY; /* Free Recv Buffer */ hw_p->stats.data_len_err++; /* Error at Rx */ } /* !data_len */ /* AS.HARNOIS */ /* Check if user has already eaten buffer */ /* if not => ERROR */ else if (hw_p->rx_ready[hw_p->rx_i_index] != -1) { if (hw_p->is_receiving) printf ("ERROR : Receive buffers are full!\n"); break; } else { hw_p->stats.rx_frames++; hw_p->stats.rx += data_len; ef_ptr = (struct enet_frame *) hw_p->rx[i]. data_ptr; #ifdef INFO_4XX_ENET hw_p->stats.pkts_rx++; #endif /* AS.HARNOIS * use ring buffer */ hw_p->rx_ready[hw_p->rx_i_index] = i; hw_p->rx_i_index++; if (NUM_RX_BUFF == hw_p->rx_i_index) hw_p->rx_i_index = 0; hw_p->rx_slot++; if (NUM_RX_BUFF == hw_p->rx_slot) hw_p->rx_slot = 0; /* AS.HARNOIS * free receive buffer only when * buffer has been handled (eth_rx) rx[i].ctrl |= MAL_RX_CTRL_EMPTY; */ } /* if data_len */ } /* while */ } /* if EMACK_RXCHL */ } static int ppc_4xx_eth_rx (struct eth_device *dev) { int length; int user_index; unsigned long msr; EMAC_4XX_HW_PST hw_p = dev->priv; hw_p->is_receiving = 1; /* tell driver */ for (;;) { /* AS.HARNOIS * use ring buffer and * get index from rx buffer desciptor queue */ user_index = hw_p->rx_ready[hw_p->rx_u_index]; if (user_index == -1) { length = -1; break; /* nothing received - leave for() loop */ } msr = mfmsr (); mtmsr (msr & ~(MSR_EE)); length = hw_p->rx[user_index].data_len & 0x0fff; /* Pass the packet up to the protocol layers. */ /* NetReceive(NetRxPackets[rxIdx], length - 4); */ /* NetReceive(NetRxPackets[i], length); */ invalidate_dcache_range((u32)hw_p->rx[user_index].data_ptr, (u32)hw_p->rx[user_index].data_ptr + length - 4); NetReceive (NetRxPackets[user_index], length - 4); /* Free Recv Buffer */ hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY; /* Free rx buffer descriptor queue */ hw_p->rx_ready[hw_p->rx_u_index] = -1; hw_p->rx_u_index++; if (NUM_RX_BUFF == hw_p->rx_u_index) hw_p->rx_u_index = 0; #ifdef INFO_4XX_ENET hw_p->stats.pkts_handled++; #endif mtmsr (msr); /* Enable IRQ's */ } hw_p->is_receiving = 0; /* tell driver */ return length; } int ppc_4xx_eth_initialize (bd_t * bis) { static int virgin = 0; struct eth_device *dev; int eth_num = 0; EMAC_4XX_HW_PST hw = NULL; u8 ethaddr[4 + CONFIG_EMAC_NR_START][6]; u32 hw_addr[4]; #if defined(CONFIG_440GX) unsigned long pfc1; mfsdr (sdr_pfc1, pfc1); pfc1 &= ~(0x01e00000); pfc1 |= 0x01200000; mtsdr (sdr_pfc1, pfc1); #endif /* first clear all mac-addresses */ for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) memcpy(ethaddr[eth_num], "\0\0\0\0\0\0", 6); for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { switch (eth_num) { default: /* fall through */ case 0: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enetaddr, 6); hw_addr[eth_num] = 0x0; break; #ifdef CONFIG_HAS_ETH1 case 1: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet1addr, 6); hw_addr[eth_num] = 0x100; break; #endif #ifdef CONFIG_HAS_ETH2 case 2: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet2addr, 6); #if defined(CONFIG_460GT) hw_addr[eth_num] = 0x300; #else hw_addr[eth_num] = 0x400; #endif break; #endif #ifdef CONFIG_HAS_ETH3 case 3: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet3addr, 6); #if defined(CONFIG_460GT) hw_addr[eth_num] = 0x400; #else hw_addr[eth_num] = 0x600; #endif break; #endif } } /* set phy num and mode */ bis->bi_phynum[0] = CONFIG_PHY_ADDR; bis->bi_phymode[0] = 0; #if defined(CONFIG_PHY1_ADDR) bis->bi_phynum[1] = CONFIG_PHY1_ADDR; bis->bi_phymode[1] = 0; #endif #if defined(CONFIG_440GX) bis->bi_phynum[2] = CONFIG_PHY2_ADDR; bis->bi_phynum[3] = CONFIG_PHY3_ADDR; bis->bi_phymode[2] = 2; bis->bi_phymode[3] = 2; #endif #if defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_405EX) ppc_4xx_eth_setup_bridge(0, bis); #endif for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { /* * See if we can actually bring up the interface, * otherwise, skip it */ if (memcmp (ethaddr[eth_num], "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } /* Allocate device structure */ dev = (struct eth_device *) malloc (sizeof (*dev)); if (dev == NULL) { printf ("ppc_4xx_eth_initialize: " "Cannot allocate eth_device %d\n", eth_num); return (-1); } memset(dev, 0, sizeof(*dev)); /* Allocate our private use data */ hw = (EMAC_4XX_HW_PST) malloc (sizeof (*hw)); if (hw == NULL) { printf ("ppc_4xx_eth_initialize: " "Cannot allocate private hw data for eth_device %d", eth_num); free (dev); return (-1); } memset(hw, 0, sizeof(*hw)); hw->hw_addr = hw_addr[eth_num]; memcpy (dev->enetaddr, ethaddr[eth_num], 6); hw->devnum = eth_num; hw->print_speed = 1; sprintf (dev->name, "ppc_4xx_eth%d", eth_num - CONFIG_EMAC_NR_START); dev->priv = (void *) hw; dev->init = ppc_4xx_eth_init; dev->halt = ppc_4xx_eth_halt; dev->send = ppc_4xx_eth_send; dev->recv = ppc_4xx_eth_rx; if (0 == virgin) { /* set the MAL IER ??? names may change with new spec ??? */ #if defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) mal_ier = MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE | MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ; #else mal_ier = MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | MAL_IER_OPBE | MAL_IER_PLBE; #endif mtdcr (malesr, 0xffffffff); /* clear pending interrupts */ mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */ mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */ mtdcr (malier, mal_ier); /* install MAL interrupt handler */ irq_install_handler (VECNUM_MS, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_MTE, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_MRE, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_TXDE, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_RXDE, (interrupt_handler_t *) enetInt, dev); virgin = 1; } #if defined(CONFIG_NET_MULTI) eth_register (dev); #else emac0_dev = dev; #endif #if defined(CONFIG_NET_MULTI) #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register (dev->name, emac4xx_miiphy_read, emac4xx_miiphy_write); #endif #endif } /* end for each supported device */ return 0; } #if !defined(CONFIG_NET_MULTI) void eth_halt (void) { if (emac0_dev) { ppc_4xx_eth_halt(emac0_dev); free(emac0_dev); emac0_dev = NULL; } } int eth_init (bd_t *bis) { ppc_4xx_eth_initialize(bis); if (emac0_dev) { return ppc_4xx_eth_init(emac0_dev, bis); } else { printf("ERROR: ethaddr not set!\n"); return -1; } } int eth_send(volatile void *packet, int length) { return (ppc_4xx_eth_send(emac0_dev, packet, length)); } int eth_rx(void) { return (ppc_4xx_eth_rx(emac0_dev)); } int emac4xx_miiphy_initialize (bd_t * bis) { #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register ("ppc_4xx_eth0", emac4xx_miiphy_read, emac4xx_miiphy_write); #endif return 0; } #endif /* !defined(CONFIG_NET_MULTI) */ #endif