/*-----------------------------------------------------------------------------+ * * This source code has been made available to you by IBM on an AS-IS * basis. Anyone receiving this source is licensed under IBM * copyrights to use it in any way he or she deems fit, including * copying it, modifying it, compiling it, and redistributing it either * with or without modifications. No license under IBM patents or * patent applications is to be implied by the copyright license. * * Any user of this software should understand that IBM cannot provide * technical support for this software and will not be responsible for * any consequences resulting from the use of this software. * * Any person who transfers this source code or any derivative work * must include the IBM copyright notice, this paragraph, and the * preceding two paragraphs in the transferred software. * * COPYRIGHT I B M CORPORATION 1995 * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M *-----------------------------------------------------------------------------*/ /*-----------------------------------------------------------------------------+ * * File Name: enetemac.c * * Function: Device driver for the ethernet EMAC3 macro on the 405GP. * * Author: Mark Wisner * * Change Activity- * * Date Description of Change BY * --------- --------------------- --- * 05-May-99 Created MKW * 27-Jun-99 Clean up JWB * 16-Jul-99 Added MAL error recovery and better IP packet handling MKW * 29-Jul-99 Added Full duplex support MKW * 06-Aug-99 Changed names for Mal CR reg MKW * 23-Aug-99 Turned off SYE when running at 10Mbs MKW * 24-Aug-99 Marked descriptor empty after call_xlc MKW * 07-Sep-99 Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16 MCG * to avoid chaining maximum sized packets. Push starting * RX descriptor address up to the next cache line boundary. * 16-Jan-00 Added support for booting with IP of 0x0 MKW * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the * EMAC_RXM register. JWB * 12-Mar-01 anne-sophie.harnois@nextream.fr * - Variables are compatible with those already defined in * include/net.h * - Receive buffer descriptor ring is used to send buffers * to the user * - Info print about send/received/handled packet number if * INFO_405_ENET is set * 17-Apr-01 stefan.roese@esd-electronics.com * - MAL reset in "eth_halt" included * - Enet speed and duplex output now in one line * 08-May-01 stefan.roese@esd-electronics.com * - MAL error handling added (eth_init called again) * 13-Nov-01 stefan.roese@esd-electronics.com * - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex * 04-Jan-02 stefan.roese@esd-electronics.com * - Wait for PHY auto negotiation to complete added * 06-Feb-02 stefan.roese@esd-electronics.com * - Bug fixed in waiting for auto negotiation to complete * 26-Feb-02 stefan.roese@esd-electronics.com * - rx and tx buffer descriptors now allocated (no fixed address * used anymore) * 17-Jun-02 stefan.roese@esd-electronics.com * - MAL error debug printf 'M' removed (rx de interrupt may * occur upon many incoming packets with only 4 rx buffers). *-----------------------------------------------------------------------------* * 17-Nov-03 travis.sawyer@sandburst.com * - ported from 405gp_enet.c to utilized upto 4 EMAC ports * in the 440GX. This port should work with the 440GP * (2 EMACs) also *-----------------------------------------------------------------------------*/ #include #if defined(CONFIG_440) && defined(CONFIG_NET_MULTI) #include #include #include #include #include #include <440gx_enet.h> #include <405_mal.h> #include #include #include "vecnum.h" #define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */ #define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ /* Ethernet Transmit and Receive Buffers */ /* AS.HARNOIS * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from * PKTSIZE and PKTSIZE_ALIGN (include/net.h) */ #define ENET_MAX_MTU PKTSIZE #define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN /* define the number of channels implemented */ #define EMAC_RXCHL EMAC_NUM_DEV #define EMAC_TXCHL EMAC_NUM_DEV /*-----------------------------------------------------------------------------+ * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal * Interrupt Controller). *-----------------------------------------------------------------------------*/ #define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE) #define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR) #define EMAC_UIC_DEF UIC_ENET #undef INFO_440_ENET #define BI_PHYMODE_NONE 0 #define BI_PHYMODE_ZMII 1 #define BI_PHYMODE_RGMII 2 /*-----------------------------------------------------------------------------+ * Global variables. TX and RX descriptors and buffers. *-----------------------------------------------------------------------------*/ /* IER globals */ static uint32_t mal_ier; /*-----------------------------------------------------------------------------+ * Prototypes and externals. *-----------------------------------------------------------------------------*/ static void enet_rcv (struct eth_device *dev, unsigned long malisr); int enetInt (struct eth_device *dev); static void mal_err (struct eth_device *dev, unsigned long isr, unsigned long uic, unsigned long maldef, unsigned long mal_errr); static void emac_err (struct eth_device *dev, unsigned long isr); /*-----------------------------------------------------------------------------+ | ppc_440x_eth_halt | Disable MAL channel, and EMACn | | +-----------------------------------------------------------------------------*/ static void ppc_440x_eth_halt (struct eth_device *dev) { EMAC_440GX_HW_PST hw_p = dev->priv; uint32_t failsafe = 10000; out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ mtdcr (maltxcarr, (MAL_CR_MMSR >> hw_p->devnum)); mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum)); /* wait for reset */ while (mfdcr (maltxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ failsafe--; if (failsafe == 0) break; } /* EMAC RESET */ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); hw_p->print_speed = 1; /* print speed message again next time */ return; } extern int phy_setup_aneg (unsigned char addr); extern int miiphy_reset (unsigned char addr); #if defined (CONFIG_440GX) int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis) { unsigned long pfc1; unsigned long zmiifer; unsigned long rmiifer; mfsdr(sdr_pfc1, pfc1); pfc1 = SDR0_PFC1_EPS_DECODE(pfc1); zmiifer = 0; rmiifer = 0; switch (pfc1) { case 1: zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; case 2: zmiifer = ZMII_FER_SMII << ZMII_FER_V(0); zmiifer = ZMII_FER_SMII << ZMII_FER_V(1); zmiifer = ZMII_FER_SMII << ZMII_FER_V(2); zmiifer = ZMII_FER_SMII << ZMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; case 3: zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; bis->bi_phymode[2] = BI_PHYMODE_RGMII; bis->bi_phymode[3] = BI_PHYMODE_NONE; break; case 4: zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (2); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_RGMII; bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; case 5: zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (2); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; case 6: zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_RGMII; break; case 0: default: zmiifer = ZMII_FER_MII << ZMII_FER_V(devnum); rmiifer = 0x0; bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_ZMII; bis->bi_phymode[3] = BI_PHYMODE_ZMII; break; } /* Ensure we setup mdio for this devnum and ONLY this devnum */ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); out32 (ZMII_FER, zmiifer); out32 (RGMII_FER, rmiifer); return ((int)pfc1); } #endif static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis) { int i, j; unsigned long reg; unsigned long msr; unsigned long speed; unsigned long duplex; unsigned long failsafe; unsigned mode_reg; unsigned short devnum; unsigned short reg_short; sys_info_t sysinfo; #if defined(CONFIG_440GX) int ethgroup; #endif EMAC_440GX_HW_PST hw_p = dev->priv; /* before doing anything, figure out if we have a MAC address */ /* if not, bail */ if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0) return -1; /* Need to get the OPB frequency so we can access the PHY */ get_sys_info (&sysinfo); msr = mfmsr (); mtmsr (msr & ~(MSR_EE)); /* disable interrupts */ devnum = hw_p->devnum; #ifdef INFO_440_ENET /* AS.HARNOIS * We should have : * hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it * is possible that new packets (without relationship with * current transfer) have got the time to arrived before * netloop calls eth_halt */ printf ("About preceeding transfer (eth%d):\n" "- Sent packet number %d\n" "- Received packet number %d\n" "- Handled packet number %d\n", hw_p->devnum, hw_p->stats.pkts_tx, hw_p->stats.pkts_rx, hw_p->stats.pkts_handled); hw_p->stats.pkts_tx = 0; hw_p->stats.pkts_rx = 0; hw_p->stats.pkts_handled = 0; #endif /* MAL Channel RESET */ /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum*2))); #else mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum)); #endif mtdcr (malrxcarr, (MAL_TXRX_CASR >> hw_p->devnum)); /* wait for reset */ /* TBS: should have udelay and failsafe here */ failsafe = 10000; /* wait for reset */ while (mfdcr (maltxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ failsafe--; if (failsafe == 0) break; } hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */ hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */ hw_p->rx_slot = 0; /* MAL Receive Slot */ hw_p->rx_i_index = 0; /* Receive Interrupt Queue Index */ hw_p->rx_u_index = 0; /* Receive User Queue Index */ hw_p->tx_slot = 0; /* MAL Transmit Slot */ hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */ hw_p->tx_u_index = 0; /* Transmit User Queue Index */ /* set RMII mode */ /* NOTE: 440GX spec states that mode is mutually exclusive */ /* NOTE: Therefore, disable all other EMACS, since we handle */ /* NOTE: only one emac at a time */ reg = 0; out32 (ZMII_FER, 0); udelay (100); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); #elif defined(CONFIG_440GX) ethgroup = ppc_440x_eth_setup_bridge(devnum, bis); #else if ((devnum == 0) || (devnum == 1)) { out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); } else { /* ((devnum == 2) || (devnum == 3)) */ out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum)); out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) | (RGMII_FER_RGMII << RGMII_FER_V (3)))); } #endif out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); __asm__ volatile ("eieio"); /* reset emac so we have access to the phy */ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); __asm__ volatile ("eieio"); failsafe = 1000; while ((in32 (EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { udelay (1000); failsafe--; } #if defined(CONFIG_440GX) /* Whack the M1 register */ mode_reg = 0x0; mode_reg &= ~0x00000038; if (sysinfo.freqOPB <= 50000000); else if (sysinfo.freqOPB <= 66666667) mode_reg |= EMAC_M1_OBCI_66; else if (sysinfo.freqOPB <= 83333333) mode_reg |= EMAC_M1_OBCI_83; else if (sysinfo.freqOPB <= 100000000) mode_reg |= EMAC_M1_OBCI_100; else mode_reg |= EMAC_M1_OBCI_GT100; out32 (EMAC_M1 + hw_p->hw_addr, mode_reg); #endif /* defined(CONFIG_440GX) */ /* wait for PHY to complete auto negotiation */ reg_short = 0; #ifndef CONFIG_CS8952_PHY switch (devnum) { case 0: reg = CONFIG_PHY_ADDR; break; case 1: reg = CONFIG_PHY1_ADDR; break; #if defined (CONFIG_440GX) case 2: reg = CONFIG_PHY2_ADDR; break; case 3: reg = CONFIG_PHY3_ADDR; break; #endif default: reg = CONFIG_PHY_ADDR; break; } bis->bi_phynum[devnum] = reg; #ifndef CONFIG_NO_PHY_RESET /* * Reset the phy, only if its the first time through * otherwise, just check the speeds & feeds */ if (hw_p->first_init == 0) { miiphy_reset (reg); #if defined(CONFIG_440GX) #if defined(CONFIG_CIS8201_PHY) /* * Cicada 8201 PHY needs to have an extended register whacked * for RGMII mode. */ if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) { #if defined(CONFIG_CIS8201_SHORT_ETCH) miiphy_write (reg, 23, 0x1300); #else miiphy_write (reg, 23, 0x1000); #endif /* * Vitesse VSC8201/Cicada CIS8201 errata: * Interoperability problem with Intel 82547EI phys * This work around (provided by Vitesse) changes * the default timer convergence from 8ms to 12ms */ miiphy_write (reg, 0x1f, 0x2a30); miiphy_write (reg, 0x08, 0x0200); miiphy_write (reg, 0x1f, 0x52b5); miiphy_write (reg, 0x02, 0x0004); miiphy_write (reg, 0x01, 0x0671); miiphy_write (reg, 0x00, 0x8fae); miiphy_write (reg, 0x1f, 0x2a30); miiphy_write (reg, 0x08, 0x0000); miiphy_write (reg, 0x1f, 0x0000); /* end Vitesse/Cicada errata */ } #endif #endif /* Start/Restart autonegotiation */ phy_setup_aneg (reg); udelay (1000); } #endif /* CONFIG_NO_PHY_RESET */ miiphy_read (reg, PHY_BMSR, ®_short); /* * Wait if PHY is capable of autonegotiation and autonegotiation is not complete */ if ((reg_short & PHY_BMSR_AUTN_ABLE) && !(reg_short & PHY_BMSR_AUTN_COMP)) { puts ("Waiting for PHY auto negotiation to complete"); i = 0; while (!(reg_short & PHY_BMSR_AUTN_COMP)) { /* * Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts (" TIMEOUT !\n"); break; } if ((i++ % 1000) == 0) { putc ('.'); } udelay (1000); /* 1 ms */ miiphy_read (reg, PHY_BMSR, ®_short); } puts (" done\n"); udelay (500000); /* another 500 ms (results in faster booting) */ } #endif speed = miiphy_speed (reg); duplex = miiphy_duplex (reg); if (hw_p->print_speed) { hw_p->print_speed = 0; printf ("ENET Speed is %d Mbps - %s duplex connection\n", (int) speed, (duplex == HALF) ? "HALF" : "FULL"); } #if defined(CONFIG_440EP) || defined(CONFIG_440GR) mfsdr(sdr_mfr, reg); if (speed == 100) { reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M; } else { reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; } mtsdr(sdr_mfr, reg); #endif /* Set ZMII/RGMII speed according to the phy link speed */ reg = in32 (ZMII_SSR); if ( (speed == 100) || (speed == 1000) ) out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum))); else out32 (ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum)))); if ((devnum == 2) || (devnum == 3)) { if (speed == 1000) reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); else if (speed == 100) reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); else reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); out32 (RGMII_SSR, reg); } /* set the Mal configuration reg */ #if defined(CONFIG_440GX) mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); #else mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); /* Errata 1.12: MAL_1 -- Disable MAL bursting */ if (get_pvr() == PVR_440GP_RB) { mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); } #endif /* Free "old" buffers */ if (hw_p->alloc_tx_buf) free (hw_p->alloc_tx_buf); if (hw_p->alloc_rx_buf) free (hw_p->alloc_rx_buf); /* * Malloc MAL buffer desciptors, make sure they are * aligned on cache line boundary size * (401/403/IOP480 = 16, 405 = 32) * and doesn't cross cache block boundaries. */ hw_p->alloc_tx_buf = (mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_TX_BUFF) + ((2 * CFG_CACHELINE_SIZE) - 2)); if (NULL == hw_p->alloc_tx_buf) return -1; if (((int) hw_p->alloc_tx_buf & CACHELINE_MASK) != 0) { hw_p->tx = (mal_desc_t *) ((int) hw_p->alloc_tx_buf + CFG_CACHELINE_SIZE - ((int) hw_p-> alloc_tx_buf & CACHELINE_MASK)); } else { hw_p->tx = hw_p->alloc_tx_buf; } hw_p->alloc_rx_buf = (mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_RX_BUFF) + ((2 * CFG_CACHELINE_SIZE) - 2)); if (NULL == hw_p->alloc_rx_buf) { free(hw_p->alloc_tx_buf); hw_p->alloc_tx_buf = NULL; return -1; } if (((int) hw_p->alloc_rx_buf & CACHELINE_MASK) != 0) { hw_p->rx = (mal_desc_t *) ((int) hw_p->alloc_rx_buf + CFG_CACHELINE_SIZE - ((int) hw_p-> alloc_rx_buf & CACHELINE_MASK)); } else { hw_p->rx = hw_p->alloc_rx_buf; } for (i = 0; i < NUM_TX_BUFF; i++) { hw_p->tx[i].ctrl = 0; hw_p->tx[i].data_len = 0; if (hw_p->first_init == 0) { hw_p->txbuf_ptr = (char *) malloc (ENET_MAX_MTU_ALIGNED); if (NULL == hw_p->txbuf_ptr) { free(hw_p->alloc_rx_buf); free(hw_p->alloc_tx_buf); hw_p->alloc_rx_buf = NULL; hw_p->alloc_tx_buf = NULL; for(j = 0; j < i; j++) { free(hw_p->tx[i].data_ptr); hw_p->tx[i].data_ptr = NULL; } } } hw_p->tx[i].data_ptr = hw_p->txbuf_ptr; if ((NUM_TX_BUFF - 1) == i) hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP; hw_p->tx_run[i] = -1; #if 0 printf ("TX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->tx[i].data_ptr); #endif } for (i = 0; i < NUM_RX_BUFF; i++) { hw_p->rx[i].ctrl = 0; hw_p->rx[i].data_len = 0; /* rx[i].data_ptr = (char *) &rx_buff[i]; */ hw_p->rx[i].data_ptr = (char *) NetRxPackets[i]; if ((NUM_RX_BUFF - 1) == i) hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP; hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; hw_p->rx_ready[i] = -1; #if 0 printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr); #endif } reg = 0x00000000; reg |= dev->enetaddr[0]; /* set high address */ reg = reg << 8; reg |= dev->enetaddr[1]; out32 (EMAC_IAH + hw_p->hw_addr, reg); reg = 0x00000000; reg |= dev->enetaddr[2]; /* set low address */ reg = reg << 8; reg |= dev->enetaddr[3]; reg = reg << 8; reg |= dev->enetaddr[4]; reg = reg << 8; reg |= dev->enetaddr[5]; out32 (EMAC_IAL + hw_p->hw_addr, reg); switch (devnum) { case 1: /* setup MAL tx & rx channel pointers */ #if defined (CONFIG_440EP) || defined (CONFIG_440GR) mtdcr (maltxctp2r, hw_p->tx); #else mtdcr (maltxctp1r, hw_p->tx); #endif mtdcr (maltxbattr, 0x0); mtdcr (malrxbattr, 0x0); mtdcr (malrxctp1r, hw_p->rx); /* set RX buffer size */ mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16); break; #if defined (CONFIG_440GX) case 2: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (maltxctp2r, hw_p->tx); mtdcr (malrxbattr, 0x0); mtdcr (malrxctp2r, hw_p->rx); /* set RX buffer size */ mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16); break; case 3: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (maltxctp3r, hw_p->tx); mtdcr (malrxbattr, 0x0); mtdcr (malrxctp3r, hw_p->rx); /* set RX buffer size */ mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_440GX */ case 0: default: /* setup MAL tx & rx channel pointers */ mtdcr (maltxbattr, 0x0); mtdcr (maltxctp0r, hw_p->tx); mtdcr (malrxbattr, 0x0); mtdcr (malrxctp0r, hw_p->rx); /* set RX buffer size */ mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16); break; } /* Enable MAL transmit and receive channels */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2))); #else mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); #endif mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); /* set transmit enable & receive enable */ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); /* set receive fifo to 4k and tx fifo to 2k */ mode_reg = in32 (EMAC_M1 + hw_p->hw_addr); mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K; /* set speed */ if (speed == _1000BASET) mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST; else if (speed == _100BASET) mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST; else mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */ if (duplex == FULL) mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST; out32 (EMAC_M1 + hw_p->hw_addr, mode_reg); /* Enable broadcast and indvidual address */ /* TBS: enabling runts as some misbehaved nics will send runts */ out32 (EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); /* we probably need to set the tx mode1 reg? maybe at tx time */ /* set transmit request threshold register */ out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ /* 440GP has a 64 byte burst length */ out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); out32 (EMAC_TXM1 + hw_p->hw_addr, 0xf8640000); /* Set fifo limit entry in tx mode 0 */ out32 (EMAC_TXM0 + hw_p->hw_addr, 0x00000003); /* Frame gap set */ out32 (EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); /* Set EMAC IER */ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | EMAC_ISR_IRE; if (speed == _100BASET) hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; out32 (EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ out32 (EMAC_IER + hw_p->hw_addr, hw_p->emac_ier); if (hw_p->first_init == 0) { /* * Connect interrupt service routines */ irq_install_handler (VECNUM_EWU0 + (hw_p->devnum * 2), (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2), (interrupt_handler_t *) enetInt, dev); } mtmsr (msr); /* enable interrupts again */ hw_p->bis = bis; hw_p->first_init = 1; return (1); } static int ppc_440x_eth_send (struct eth_device *dev, volatile void *ptr, int len) { struct enet_frame *ef_ptr; ulong time_start, time_now; unsigned long temp_txm0; EMAC_440GX_HW_PST hw_p = dev->priv; ef_ptr = (struct enet_frame *) ptr; /*-----------------------------------------------------------------------+ * Copy in our address into the frame. *-----------------------------------------------------------------------*/ (void) memcpy (ef_ptr->source_addr, dev->enetaddr, ENET_ADDR_LENGTH); /*-----------------------------------------------------------------------+ * If frame is too long or too short, modify length. *-----------------------------------------------------------------------*/ /* TBS: where does the fragment go???? */ if (len > ENET_MAX_MTU) len = ENET_MAX_MTU; /* memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */ memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len); /*-----------------------------------------------------------------------+ * set TX Buffer busy, and send it *-----------------------------------------------------------------------*/ hw_p->tx[hw_p->tx_slot].ctrl = (MAL_TX_CTRL_LAST | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) & ~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA); if ((NUM_TX_BUFF - 1) == hw_p->tx_slot) hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_WRAP; hw_p->tx[hw_p->tx_slot].data_len = (short) len; hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY; __asm__ volatile ("eieio"); out32 (EMAC_TXM0 + hw_p->hw_addr, in32 (EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); #ifdef INFO_440_ENET hw_p->stats.pkts_tx++; #endif /*-----------------------------------------------------------------------+ * poll unitl the packet is sent and then make sure it is OK *-----------------------------------------------------------------------*/ time_start = get_timer (0); while (1) { temp_txm0 = in32 (EMAC_TXM0 + hw_p->hw_addr); /* loop until either TINT turns on or 3 seconds elapse */ if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) { /* transmit is done, so now check for errors * If there is an error, an interrupt should * happen when we return */ time_now = get_timer (0); if ((time_now - time_start) > 3000) { return (-1); } } else { return (len); } } } int enetInt (struct eth_device *dev) { int serviced; int rc = -1; /* default to not us */ unsigned long mal_isr; unsigned long emac_isr = 0; unsigned long mal_rx_eob; unsigned long my_uic0msr, my_uic1msr; #if defined(CONFIG_440GX) unsigned long my_uic2msr; #endif EMAC_440GX_HW_PST hw_p; /* * Because the mal is generic, we need to get the current * eth device */ dev = eth_get_dev (); hw_p = dev->priv; /* enter loop that stays in interrupt code until nothing to service */ do { serviced = 0; my_uic0msr = mfdcr (uic0msr); my_uic1msr = mfdcr (uic1msr); #if defined(CONFIG_440GX) my_uic2msr = mfdcr (uic2msr); #endif if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) && !(my_uic1msr & (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE))) { /* not for us */ return (rc); } #if defined (CONFIG_440GX) if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) { /* not for us */ return (rc); } #endif /* get and clear controller status interrupts */ /* look at Mal and EMAC interrupts */ if ((my_uic0msr & (UIC_MRE | UIC_MTE)) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { /* we have a MAL interrupt */ mal_isr = mfdcr (malesr); /* look for mal error */ if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) { mal_err (dev, mal_isr, my_uic0msr, MAL_UIC_DEF, MAL_UIC_ERR); serviced = 1; rc = 0; } } /* port by port dispatch of emac interrupts */ if (hw_p->devnum == 0) { if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ return (rc); /* we had errors so get out */ } } if (hw_p->devnum == 1) { if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ return (rc); /* we had errors so get out */ } } #if defined (CONFIG_440GX) if (hw_p->devnum == 2) { if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (uic2sr, UIC_ETH2); return (rc); /* we had errors so get out */ } } if (hw_p->devnum == 3) { if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; rc = 0; } } if ((hw_p->emac_ier & emac_isr) || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ mtdcr (uic2sr, UIC_ETH3); return (rc); /* we had errors so get out */ } } #endif /* CONFIG_440GX */ /* handle MAX TX EOB interrupt from a tx */ if (my_uic0msr & UIC_MTE) { mal_rx_eob = mfdcr (maltxeobisr); mtdcr (maltxeobisr, mal_rx_eob); mtdcr (uic0sr, UIC_MTE); } /* handle MAL RX EOB interupt from a receive */ /* check for EOB on valid channels */ if (my_uic0msr & UIC_MRE) { mal_rx_eob = mfdcr (malrxeobisr); if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */ /* clear EOB mtdcr(malrxeobisr, mal_rx_eob); */ enet_rcv (dev, emac_isr); /* indicate that we serviced an interrupt */ serviced = 1; rc = 0; } } mtdcr (uic0sr, UIC_MRE); /* Clear */ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ switch (hw_p->devnum) { case 0: mtdcr (uic1sr, UIC_ETH0); break; case 1: mtdcr (uic1sr, UIC_ETH1); break; #if defined (CONFIG_440GX) case 2: mtdcr (uic2sr, UIC_ETH2); break; case 3: mtdcr (uic2sr, UIC_ETH3); break; #endif /* CONFIG_440GX */ default: break; } } while (serviced); return (rc); } /*-----------------------------------------------------------------------------+ * MAL Error Routine *-----------------------------------------------------------------------------*/ static void mal_err (struct eth_device *dev, unsigned long isr, unsigned long uic, unsigned long maldef, unsigned long mal_errr) { EMAC_440GX_HW_PST hw_p = dev->priv; mtdcr (malesr, isr); /* clear interrupt */ /* clear DE interrupt */ mtdcr (maltxdeir, 0xC0000000); mtdcr (malrxdeir, 0x80000000); #ifdef INFO_440_ENET printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr); #endif eth_init (hw_p->bis); /* start again... */ } /*-----------------------------------------------------------------------------+ * EMAC Error Routine *-----------------------------------------------------------------------------*/ static void emac_err (struct eth_device *dev, unsigned long isr) { EMAC_440GX_HW_PST hw_p = dev->priv; printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); out32 (EMAC_ISR + hw_p->hw_addr, isr); } /*-----------------------------------------------------------------------------+ * enet_rcv() handles the ethernet receive data *-----------------------------------------------------------------------------*/ static void enet_rcv (struct eth_device *dev, unsigned long malisr) { struct enet_frame *ef_ptr; unsigned long data_len; unsigned long rx_eob_isr; EMAC_440GX_HW_PST hw_p = dev->priv; int handled = 0; int i; int loop_count = 0; rx_eob_isr = mfdcr (malrxeobisr); if ((0x80000000 >> hw_p->devnum) & rx_eob_isr) { /* clear EOB */ mtdcr (malrxeobisr, rx_eob_isr); /* EMAC RX done */ while (1) { /* do all */ i = hw_p->rx_slot; if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl) || (loop_count >= NUM_RX_BUFF)) break; loop_count++; hw_p->rx_slot++; if (NUM_RX_BUFF == hw_p->rx_slot) hw_p->rx_slot = 0; handled++; data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */ if (data_len) { if (data_len > ENET_MAX_MTU) /* Check len */ data_len = 0; else { if (EMAC_RX_ERRORS & hw_p->rx[i].ctrl) { /* Check Errors */ data_len = 0; hw_p->stats.rx_err_log[hw_p-> rx_err_index] = hw_p->rx[i].ctrl; hw_p->rx_err_index++; if (hw_p->rx_err_index == MAX_ERR_LOG) hw_p->rx_err_index = 0; } /* emac_erros */ } /* data_len < max mtu */ } /* if data_len */ if (!data_len) { /* no data */ hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY; /* Free Recv Buffer */ hw_p->stats.data_len_err++; /* Error at Rx */ } /* !data_len */ /* AS.HARNOIS */ /* Check if user has already eaten buffer */ /* if not => ERROR */ else if (hw_p->rx_ready[hw_p->rx_i_index] != -1) { if (hw_p->is_receiving) printf ("ERROR : Receive buffers are full!\n"); break; } else { hw_p->stats.rx_frames++; hw_p->stats.rx += data_len; ef_ptr = (struct enet_frame *) hw_p->rx[i]. data_ptr; #ifdef INFO_440_ENET hw_p->stats.pkts_rx++; #endif /* AS.HARNOIS * use ring buffer */ hw_p->rx_ready[hw_p->rx_i_index] = i; hw_p->rx_i_index++; if (NUM_RX_BUFF == hw_p->rx_i_index) hw_p->rx_i_index = 0; /* printf("X"); /|* test-only *|/ */ /* AS.HARNOIS * free receive buffer only when * buffer has been handled (eth_rx) rx[i].ctrl |= MAL_RX_CTRL_EMPTY; */ } /* if data_len */ } /* while */ } /* if EMACK_RXCHL */ } static int ppc_440x_eth_rx (struct eth_device *dev) { int length; int user_index; unsigned long msr; EMAC_440GX_HW_PST hw_p = dev->priv; hw_p->is_receiving = 1; /* tell driver */ for (;;) { /* AS.HARNOIS * use ring buffer and * get index from rx buffer desciptor queue */ user_index = hw_p->rx_ready[hw_p->rx_u_index]; if (user_index == -1) { length = -1; break; /* nothing received - leave for() loop */ } msr = mfmsr (); mtmsr (msr & ~(MSR_EE)); length = hw_p->rx[user_index].data_len; /* Pass the packet up to the protocol layers. */ /* NetReceive(NetRxPackets[rxIdx], length - 4); */ /* NetReceive(NetRxPackets[i], length); */ NetReceive (NetRxPackets[user_index], length - 4); /* Free Recv Buffer */ hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY; /* Free rx buffer descriptor queue */ hw_p->rx_ready[hw_p->rx_u_index] = -1; hw_p->rx_u_index++; if (NUM_RX_BUFF == hw_p->rx_u_index) hw_p->rx_u_index = 0; #ifdef INFO_440_ENET hw_p->stats.pkts_handled++; #endif mtmsr (msr); /* Enable IRQ's */ } hw_p->is_receiving = 0; /* tell driver */ return length; } int ppc_440x_eth_initialize (bd_t * bis) { static int virgin = 0; struct eth_device *dev; int eth_num = 0; EMAC_440GX_HW_PST hw = NULL; #if defined(CONFIG_440GX) unsigned long pfc1; mfsdr (sdr_pfc1, pfc1); pfc1 &= ~(0x01e00000); pfc1 |= 0x01200000; mtsdr (sdr_pfc1, pfc1); #endif /* set phy num and mode */ bis->bi_phynum[0] = CONFIG_PHY_ADDR; #if defined(CONFIG_PHY1_ADDR) bis->bi_phynum[1] = CONFIG_PHY1_ADDR; #endif #if defined(CONFIG_440GX) bis->bi_phynum[2] = CONFIG_PHY2_ADDR; bis->bi_phynum[3] = CONFIG_PHY3_ADDR; bis->bi_phymode[0] = 0; bis->bi_phymode[1] = 0; bis->bi_phymode[2] = 2; bis->bi_phymode[3] = 2; #if defined (CONFIG_440GX) ppc_440x_eth_setup_bridge(0, bis); #endif #endif for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) { /* See if we can actually bring up the interface, otherwise, skip it */ switch (eth_num) { default: /* fall through */ case 0: if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; #ifdef CONFIG_HAS_ETH1 case 1: if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; #endif #ifdef CONFIG_HAS_ETH2 case 2: if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; #endif #ifdef CONFIG_HAS_ETH3 case 3: if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) { bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; continue; } break; #endif } /* Allocate device structure */ dev = (struct eth_device *) malloc (sizeof (*dev)); if (dev == NULL) { printf ("ppc_440x_eth_initialize: " "Cannot allocate eth_device %d\n", eth_num); return (-1); } memset(dev, 0, sizeof(*dev)); /* Allocate our private use data */ hw = (EMAC_440GX_HW_PST) malloc (sizeof (*hw)); if (hw == NULL) { printf ("ppc_440x_eth_initialize: " "Cannot allocate private hw data for eth_device %d", eth_num); free (dev); return (-1); } memset(hw, 0, sizeof(*hw)); switch (eth_num) { default: /* fall through */ case 0: hw->hw_addr = 0; memcpy (dev->enetaddr, bis->bi_enetaddr, 6); break; #ifdef CONFIG_HAS_ETH1 case 1: hw->hw_addr = 0x100; memcpy (dev->enetaddr, bis->bi_enet1addr, 6); break; #endif #ifdef CONFIG_HAS_ETH2 case 2: hw->hw_addr = 0x400; memcpy (dev->enetaddr, bis->bi_enet2addr, 6); break; #endif #ifdef CONFIG_HAS_ETH3 case 3: hw->hw_addr = 0x600; memcpy (dev->enetaddr, bis->bi_enet3addr, 6); break; #endif } hw->devnum = eth_num; hw->print_speed = 1; sprintf (dev->name, "ppc_440x_eth%d", eth_num); dev->priv = (void *) hw; dev->init = ppc_440x_eth_init; dev->halt = ppc_440x_eth_halt; dev->send = ppc_440x_eth_send; dev->recv = ppc_440x_eth_rx; if (0 == virgin) { /* set the MAL IER ??? names may change with new spec ??? */ mal_ier = MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | MAL_IER_OPBE | MAL_IER_PLBE; mtdcr (malesr, 0xffffffff); /* clear pending interrupts */ mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */ mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */ mtdcr (malier, mal_ier); /* install MAL interrupt handler */ irq_install_handler (VECNUM_MS, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_MTE, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_MRE, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_TXDE, (interrupt_handler_t *) enetInt, dev); irq_install_handler (VECNUM_RXDE, (interrupt_handler_t *) enetInt, dev); virgin = 1; } eth_register (dev); } /* end for each supported device */ return (1); } #endif /* CONFIG_440 && CONFIG_NET_MULTI */