/* * MPC8560 FCC Fast Ethernet * Copyright (c) 2003 Motorola,Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) * * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * MPC8560 FCC Fast Ethernet * Basic ET HW initialization and packet RX/TX routines * * This code will not perform the IO port configuration. This should be * done in the iop_conf_t structure specific for the board. * * TODO: * add a PHY driver to do the negotiation * reflect negotiation results in FPSMR * look for ways to configure the board specific stuff elsewhere, eg. * config_xxx.h or the board directory */ #include <common.h> #include <malloc.h> #include <asm/cpm_85xx.h> #include <command.h> #include <config.h> #include <net.h> #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) #include <miiphy.h> #endif #if defined(CONFIG_CPM2) #if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \ defined(CONFIG_NET_MULTI) static struct ether_fcc_info_s { int ether_index; int proff_enet; ulong cpm_cr_enet_sblock; ulong cpm_cr_enet_page; ulong cmxfcr_mask; ulong cmxfcr_value; } ether_fcc_info[] = { #ifdef CONFIG_ETHER_ON_FCC1 { 0, PROFF_FCC1, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, CONFIG_SYS_CMXFCR_MASK1, CONFIG_SYS_CMXFCR_VALUE1 }, #endif #ifdef CONFIG_ETHER_ON_FCC2 { 1, PROFF_FCC2, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, CONFIG_SYS_CMXFCR_MASK2, CONFIG_SYS_CMXFCR_VALUE2 }, #endif #ifdef CONFIG_ETHER_ON_FCC3 { 2, PROFF_FCC3, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, CONFIG_SYS_CMXFCR_MASK3, CONFIG_SYS_CMXFCR_VALUE3 }, #endif }; /*---------------------------------------------------------------------*/ /* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ #define PKT_MAXDMA_SIZE 1520 /* The FCC stores dest/src/type, data, and checksum for receive packets. */ #define PKT_MAXBUF_SIZE 1518 #define PKT_MINBUF_SIZE 64 /* Maximum input buffer size. Must be a multiple of 32. */ #define PKT_MAXBLR_SIZE 1536 #define TOUT_LOOP 1000000 #define TX_BUF_CNT 2 static uint rxIdx; /* index of the current RX buffer */ static uint txIdx; /* index of the current TX buffer */ /* * FCC Ethernet Tx and Rx buffer descriptors. * Provide for Double Buffering * Note: PKTBUFSRX is defined in net.h */ typedef volatile struct rtxbd { cbd_t rxbd[PKTBUFSRX]; cbd_t txbd[TX_BUF_CNT]; } RTXBD; /* Good news: the FCC supports external BDs! */ #ifdef __GNUC__ static RTXBD rtx __attribute__ ((aligned(8))); #else #error "rtx must be 64-bit aligned" #endif #undef ET_DEBUG static int fec_send(struct eth_device* dev, volatile void *packet, int length) { int i = 0; int result = 0; if (length <= 0) { printf("fec: bad packet size: %d\n", length); goto out; } for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { if (i >= TOUT_LOOP) { printf("fec: tx buffer not ready\n"); goto out; } } rtx.txbd[txIdx].cbd_bufaddr = (uint)packet; rtx.txbd[txIdx].cbd_datlen = length; rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | \ BD_ENET_TX_TC | BD_ENET_TX_PAD); for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { if (i >= TOUT_LOOP) { printf("fec: tx error\n"); goto out; } } #ifdef ET_DEBUG printf("cycles: 0x%x txIdx=0x%04x status: 0x%04x\n", i, txIdx,rtx.txbd[txIdx].cbd_sc); printf("packets at 0x%08x, length_in_bytes=0x%x\n",(uint)packet,length); for(i=0;i<(length/16 + 1);i++) { printf("%08x %08x %08x %08x\n",*((uint *)rtx.txbd[txIdx].cbd_bufaddr+i*4),\ *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 1),*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 2), \ *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 3)); } #endif /* return only status bits */ result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; txIdx = (txIdx + 1) % TX_BUF_CNT; out: return result; } static int fec_recv(struct eth_device* dev) { int length; for (;;) { if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { length = -1; break; /* nothing received - leave for() loop */ } length = rtx.rxbd[rxIdx].cbd_datlen; if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) { printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc); } else { /* Pass the packet up to the protocol layers. */ NetReceive(NetRxPackets[rxIdx], length - 4); } /* Give the buffer back to the FCC. */ rtx.rxbd[rxIdx].cbd_datlen = 0; /* wrap around buffer index when necessary */ if ((rxIdx + 1) >= PKTBUFSRX) { rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); rxIdx = 0; } else { rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; rxIdx++; } } return length; } static int fec_init(struct eth_device* dev, bd_t *bis) { struct ether_fcc_info_s * info = dev->priv; int i; volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp); fcc_enet_t *pram_ptr; unsigned long mem_addr; #if 0 mii_discover_phy(); #endif /* 28.9 - (1-2): ioports have been set up already */ /* 28.9 - (3): connect FCC's tx and rx clocks */ cpm->im_cpm_mux.cmxuar = 0; /* ATM */ cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) | info->cmxfcr_value; /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */ if(info->ether_index == 0) { cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; } else if (info->ether_index == 1) { cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; } else if (info->ether_index == 2) { cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; } /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */ if(info->ether_index == 0) { cpm->im_cpm_fcc1.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC; } else if (info->ether_index == 1){ cpm->im_cpm_fcc2.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC; } else if (info->ether_index == 2){ cpm->im_cpm_fcc3.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC; } /* 28.9 - (6): FDSR: Ethernet Syn */ if(info->ether_index == 0) { cpm->im_cpm_fcc1.fdsr = 0xD555; } else if (info->ether_index == 1) { cpm->im_cpm_fcc2.fdsr = 0xD555; } else if (info->ether_index == 2) { cpm->im_cpm_fcc3.fdsr = 0xD555; } /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ rxIdx = 0; txIdx = 0; /* Setup Receiver Buffer Descriptors */ for (i = 0; i < PKTBUFSRX; i++) { rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; rtx.rxbd[i].cbd_datlen = 0; rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i]; } rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; /* Setup Ethernet Transmitter Buffer Descriptors */ for (i = 0; i < TX_BUF_CNT; i++) { rtx.txbd[i].cbd_sc = 0; rtx.txbd[i].cbd_datlen = 0; rtx.txbd[i].cbd_bufaddr = 0; } rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; /* 28.9 - (7): initialize parameter ram */ pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]); /* clear whole structure to make sure all reserved fields are zero */ memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); /* * common Parameter RAM area * * Allocate space in the reserved FCC area of DPRAM for the * internal buffers. No one uses this space (yet), so we * can do this. Later, we will add resource management for * this area. * CPM_FCC_SPECIAL_BASE: 0xB000 for MPC8540, MPC8560 * 0x9000 for MPC8541, MPC8555 */ mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64); pram_ptr->fen_genfcc.fcc_riptr = mem_addr; pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; /* * Set maximum bytes per receive buffer. * It must be a multiple of 32. */ pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; /* 1536 */ /* localbus SDRAM should be preferred */ pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB | CONFIG_SYS_CPMFCR_RAMTYPE) << 24; pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]); pram_ptr->fen_genfcc.fcc_rbdstat = 0; pram_ptr->fen_genfcc.fcc_rbdlen = 0; pram_ptr->fen_genfcc.fcc_rdptr = 0; /* localbus SDRAM should be preferred */ pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB | CONFIG_SYS_CPMFCR_RAMTYPE) << 24; pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]); pram_ptr->fen_genfcc.fcc_tbdstat = 0; pram_ptr->fen_genfcc.fcc_tbdlen = 0; pram_ptr->fen_genfcc.fcc_tdptr = 0; /* protocol-specific area */ pram_ptr->fen_statbuf = 0x0; pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */ pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */ pram_ptr->fen_crcec = 0; pram_ptr->fen_alec = 0; pram_ptr->fen_disfc = 0; pram_ptr->fen_retlim = 15; /* Retry limit threshold */ pram_ptr->fen_retcnt = 0; pram_ptr->fen_pper = 0; pram_ptr->fen_boffcnt = 0; pram_ptr->fen_gaddrh = 0; pram_ptr->fen_gaddrl = 0; pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ /* * Set Ethernet station address. * * This is supplied in the board information structure, so we * copy that into the controller. * So far we have only been given one Ethernet address. We make * it unique by setting a few bits in the upper byte of the * non-static part of the address. */ #define ea eth_get_dev()->enetaddr pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; #undef ea pram_ptr->fen_ibdcount = 0; pram_ptr->fen_ibdstart = 0; pram_ptr->fen_ibdend = 0; pram_ptr->fen_txlen = 0; pram_ptr->fen_iaddrh = 0; /* disable hash */ pram_ptr->fen_iaddrl = 0; pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register: 64 */ /* pad pointer. use tiptr since we don't need a specific padding char */ pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr; pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length:1520 */ pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length:1520 */ #if defined(ET_DEBUG) printf("parm_ptr(0xff788500) = %p\n",pram_ptr); printf("pram_ptr->fen_genfcc.fcc_rbase %08x\n", pram_ptr->fen_genfcc.fcc_rbase); printf("pram_ptr->fen_genfcc.fcc_tbase %08x\n", pram_ptr->fen_genfcc.fcc_tbase); #endif /* 28.9 - (8)(9): clear out events in FCCE */ /* 28.9 - (9): FCCM: mask all events */ if(info->ether_index == 0) { cpm->im_cpm_fcc1.fcce = ~0x0; cpm->im_cpm_fcc1.fccm = 0; } else if (info->ether_index == 1) { cpm->im_cpm_fcc2.fcce = ~0x0; cpm->im_cpm_fcc2.fccm = 0; } else if (info->ether_index == 2) { cpm->im_cpm_fcc3.fcce = ~0x0; cpm->im_cpm_fcc3.fccm = 0; } /* 28.9 - (10-12): we don't use ethernet interrupts */ /* 28.9 - (13) * * Let's re-initialize the channel now. We have to do it later * than the manual describes because we have just now finished * the BD initialization. */ cp->cpcr = mk_cr_cmd(info->cpm_cr_enet_page, info->cpm_cr_enet_sblock, 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG; do { __asm__ __volatile__ ("eieio"); } while (cp->cpcr & CPM_CR_FLG); /* 28.9 - (14): enable tx/rx in gfmr */ if(info->ether_index == 0) { cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; } else if (info->ether_index == 1) { cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; } else if (info->ether_index == 2) { cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; } return 1; } static void fec_halt(struct eth_device* dev) { struct ether_fcc_info_s * info = dev->priv; volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR; /* write GFMR: disable tx/rx */ if(info->ether_index == 0) { cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR); } else if(info->ether_index == 1) { cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR); } else if(info->ether_index == 2) { cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR); } } int fec_initialize(bd_t *bis) { struct eth_device* dev; int i; for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) { dev = (struct eth_device*) malloc(sizeof *dev); memset(dev, 0, sizeof *dev); sprintf(dev->name, "FCC%d ETHERNET", ether_fcc_info[i].ether_index + 1); dev->priv = ðer_fcc_info[i]; dev->init = fec_init; dev->halt = fec_halt; dev->send = fec_send; dev->recv = fec_recv; eth_register(dev); #if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \ && defined(CONFIG_BITBANGMII) miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write); #endif } return 1; } #endif #endif /* CONFIG_CPM2 */