/* * MPC8260 FCC Fast Ethernet * * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) * * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * MPC8260 FCC Fast Ethernet * Basic ET HW initialization and packet RX/TX routines * * This code will not perform the IO port configuration. This should be * done in the iop_conf_t structure specific for the board. * * TODO: * add a PHY driver to do the negotiation * reflect negotiation results in FPSMR * look for ways to configure the board specific stuff elsewhere, eg. * config_xxx.h or the board directory */ #include <common.h> #include <malloc.h> #include <asm/cpm_8260.h> #include <mpc8260.h> #include <command.h> #include <config.h> #include <net.h> #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) #include <miiphy.h> #endif DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \ defined(CONFIG_NET_MULTI) static struct ether_fcc_info_s { int ether_index; int proff_enet; ulong cpm_cr_enet_sblock; ulong cpm_cr_enet_page; ulong cmxfcr_mask; ulong cmxfcr_value; } ether_fcc_info[] = { #ifdef CONFIG_ETHER_ON_FCC1 { 0, PROFF_FCC1, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, CONFIG_SYS_CMXFCR_MASK1, CONFIG_SYS_CMXFCR_VALUE1 }, #endif #ifdef CONFIG_ETHER_ON_FCC2 { 1, PROFF_FCC2, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, CONFIG_SYS_CMXFCR_MASK2, CONFIG_SYS_CMXFCR_VALUE2 }, #endif #ifdef CONFIG_ETHER_ON_FCC3 { 2, PROFF_FCC3, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, CONFIG_SYS_CMXFCR_MASK3, CONFIG_SYS_CMXFCR_VALUE3 }, #endif }; /*---------------------------------------------------------------------*/ /* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ #define PKT_MAXDMA_SIZE 1520 /* The FCC stores dest/src/type, data, and checksum for receive packets. */ #define PKT_MAXBUF_SIZE 1518 #define PKT_MINBUF_SIZE 64 /* Maximum input buffer size. Must be a multiple of 32. */ #define PKT_MAXBLR_SIZE 1536 #define TOUT_LOOP 1000000 #define TX_BUF_CNT 2 #ifdef __GNUC__ static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8))); #else #error "txbuf must be 64-bit aligned" #endif static uint rxIdx; /* index of the current RX buffer */ static uint txIdx; /* index of the current TX buffer */ /* * FCC Ethernet Tx and Rx buffer descriptors. * Provide for Double Buffering * Note: PKTBUFSRX is defined in net.h */ typedef volatile struct rtxbd { cbd_t rxbd[PKTBUFSRX]; cbd_t txbd[TX_BUF_CNT]; } RTXBD; /* Good news: the FCC supports external BDs! */ #ifdef __GNUC__ static RTXBD rtx __attribute__ ((aligned(8))); #else #error "rtx must be 64-bit aligned" #endif static int fec_send(struct eth_device* dev, volatile void *packet, int length) { int i; int result = 0; if (length <= 0) { printf("fec: bad packet size: %d\n", length); goto out; } for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { if (i >= TOUT_LOOP) { puts ("fec: tx buffer not ready\n"); goto out; } } rtx.txbd[txIdx].cbd_bufaddr = (uint)packet; rtx.txbd[txIdx].cbd_datlen = length; rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | BD_ENET_TX_WRAP); for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { if (i >= TOUT_LOOP) { puts ("fec: tx error\n"); goto out; } } #ifdef ET_DEBUG printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc); #endif /* return only status bits */ result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; out: return result; } static int fec_recv(struct eth_device* dev) { int length; for (;;) { if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { length = -1; break; /* nothing received - leave for() loop */ } length = rtx.rxbd[rxIdx].cbd_datlen; if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) { printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc); } else { /* Pass the packet up to the protocol layers. */ NetReceive(NetRxPackets[rxIdx], length - 4); } /* Give the buffer back to the FCC. */ rtx.rxbd[rxIdx].cbd_datlen = 0; /* wrap around buffer index when necessary */ if ((rxIdx + 1) >= PKTBUFSRX) { rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); rxIdx = 0; } else { rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; rxIdx++; } } return length; } static int fec_init(struct eth_device* dev, bd_t *bis) { struct ether_fcc_info_s * info = dev->priv; int i; volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; volatile cpm8260_t *cp = &(immr->im_cpm); fcc_enet_t *pram_ptr; unsigned long mem_addr; #if 0 mii_discover_phy(); #endif /* 28.9 - (1-2): ioports have been set up already */ /* 28.9 - (3): connect FCC's tx and rx clocks */ immr->im_cpmux.cmx_uar = 0; immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) | info->cmxfcr_value; /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ immr->im_fcc[info->ether_index].fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */ immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC; /* 28.9 - (6): FDSR: Ethernet Syn */ immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555; /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ rxIdx = 0; txIdx = 0; /* Setup Receiver Buffer Descriptors */ for (i = 0; i < PKTBUFSRX; i++) { rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; rtx.rxbd[i].cbd_datlen = 0; rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i]; } rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; /* Setup Ethernet Transmitter Buffer Descriptors */ for (i = 0; i < TX_BUF_CNT; i++) { rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC); rtx.txbd[i].cbd_datlen = 0; rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; } rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; /* 28.9 - (7): initialise parameter ram */ pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]); /* clear whole structure to make sure all reserved fields are zero */ memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); /* * common Parameter RAM area * * Allocate space in the reserved FCC area of DPRAM for the * internal buffers. No one uses this space (yet), so we * can do this. Later, we will add resource management for * this area. */ mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64); pram_ptr->fen_genfcc.fcc_riptr = mem_addr; pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; /* * Set maximum bytes per receive buffer. * It must be a multiple of 32. */ pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB | CONFIG_SYS_CPMFCR_RAMTYPE) << 24; pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]); pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB | CONFIG_SYS_CPMFCR_RAMTYPE) << 24; pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]); /* protocol-specific area */ pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */ pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */ pram_ptr->fen_retlim = 15; /* Retry limit threshold */ pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ /* * Set Ethernet station address. * * This is supplied in the board information structure, so we * copy that into the controller. * So, far we have only been given one Ethernet address. We make * it unique by setting a few bits in the upper byte of the * non-static part of the address. */ #define ea eth_get_dev()->enetaddr pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; #undef ea pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ /* pad pointer. use tiptr since we don't need a specific padding char */ pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr; pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */ pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */ pram_ptr->fen_rfthr = 1; pram_ptr->fen_rfcnt = 1; #if 0 printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n", pram_ptr->fen_genfcc.fcc_rbase); printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n", pram_ptr->fen_genfcc.fcc_tbase); #endif /* 28.9 - (8): clear out events in FCCE */ immr->im_fcc[info->ether_index].fcc_fcce = ~0x0; /* 28.9 - (9): FCCM: mask all events */ immr->im_fcc[info->ether_index].fcc_fccm = 0; /* 28.9 - (10-12): we don't use ethernet interrupts */ /* 28.9 - (13) * * Let's re-initialize the channel now. We have to do it later * than the manual describes because we have just now finished * the BD initialization. */ cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page, info->cpm_cr_enet_sblock, 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG; do { __asm__ __volatile__ ("eieio"); } while (cp->cp_cpcr & CPM_CR_FLG); /* 28.9 - (14): enable tx/rx in gfmr */ immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; return 1; } static void fec_halt(struct eth_device* dev) { struct ether_fcc_info_s * info = dev->priv; volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; /* write GFMR: disable tx/rx */ immr->im_fcc[info->ether_index].fcc_gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR); } int fec_initialize(bd_t *bis) { struct eth_device* dev; int i; for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) { dev = (struct eth_device*) malloc(sizeof *dev); memset(dev, 0, sizeof *dev); sprintf(dev->name, "FCC%d ETHERNET", ether_fcc_info[i].ether_index + 1); dev->priv = ðer_fcc_info[i]; dev->init = fec_init; dev->halt = fec_halt; dev->send = fec_send; dev->recv = fec_recv; eth_register(dev); #if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \ && defined(CONFIG_BITBANGMII) miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write); #endif } return 1; } #ifdef CONFIG_ETHER_LOOPBACK_TEST #define ELBT_BUFSZ 1024 /* must be multiple of 32 */ #define ELBT_CRCSZ 4 #define ELBT_NRXBD 4 /* must be at least 2 */ #define ELBT_NTXBD 4 #define ELBT_MAXRXERR 32 #define ELBT_MAXTXERR 32 #define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */ typedef struct { uint off; char *lab; } elbt_prdesc; typedef struct { uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl; uint badsrc, badtyp, badlen, badbit; } elbt_rxeacc; static elbt_prdesc rxeacc_descs[] = { { offsetof(elbt_rxeacc, _l), "Not Last in Frame" }, { offsetof(elbt_rxeacc, _f), "Not First in Frame" }, { offsetof(elbt_rxeacc, m), "Address Miss" }, { offsetof(elbt_rxeacc, bc), "Broadcast Address" }, { offsetof(elbt_rxeacc, mc), "Multicast Address" }, { offsetof(elbt_rxeacc, lg), "Frame Length Violation"}, { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" }, { offsetof(elbt_rxeacc, sh), "Short Frame" }, { offsetof(elbt_rxeacc, cr), "CRC Error" }, { offsetof(elbt_rxeacc, ov), "Overrun" }, { offsetof(elbt_rxeacc, cl), "Collision" }, { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" }, { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" }, { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" }, { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" }, }; static int rxeacc_ndesc = sizeof (rxeacc_descs) / sizeof (rxeacc_descs[0]); typedef struct { uint def, hb, lc, rl, rc, un, csl; } elbt_txeacc; static elbt_prdesc txeacc_descs[] = { { offsetof(elbt_txeacc, def), "Defer Indication" }, { offsetof(elbt_txeacc, hb), "Heartbeat" }, { offsetof(elbt_txeacc, lc), "Late Collision" }, { offsetof(elbt_txeacc, rl), "Retransmission Limit" }, { offsetof(elbt_txeacc, rc), "Retry Count" }, { offsetof(elbt_txeacc, un), "Underrun" }, { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" }, }; static int txeacc_ndesc = sizeof (txeacc_descs) / sizeof (txeacc_descs[0]); typedef struct { uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ]; uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ]; cbd_t rxbd[ELBT_NRXBD]; cbd_t txbd[ELBT_NTXBD]; enum { Idle, Running, Closing, Closed } state; int proff, page, sblock; uint clstime, nsent, ntxerr, nrcvd, nrxerr; ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR]; elbt_rxeacc rxeacc; elbt_txeacc txeacc; } __attribute__ ((aligned(8))) elbt_chan; static uchar patbytes[ELBT_NTXBD] = { 0xff, 0xaa, 0x55, 0x00 }; static uint patwords[ELBT_NTXBD] = { 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000 }; #ifdef __GNUC__ static elbt_chan elbt_chans[3] __attribute__ ((aligned(8))); #else #error "elbt_chans must be 64-bit aligned" #endif #define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005) static elbt_prdesc epram_descs[] = { { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" }, { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" }, { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" }, { offsetof(fcc_enet_t, fen_octc), "Octets" }, { offsetof(fcc_enet_t, fen_colc), "Collisions" }, { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" }, { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" }, { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" }, { offsetof(fcc_enet_t, fen_frgc), "Fragments" }, { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" }, { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" }, { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" }, { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" }, { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" }, { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" }, { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" }, { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"}, }; static int epram_ndesc = sizeof (epram_descs) / sizeof (epram_descs[0]); /* * given an elbt_prdesc array and an array of base addresses, print * each prdesc down the screen with the values fetched from each * base address across the screen */ static void print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase) { elbt_prdesc *dp = descs, *edp = dp + ndesc; int i; printf ("%32s", ""); for (i = 0; i < nbase; i++) printf (" Channel %d", i); putc ('\n'); while (dp < edp) { printf ("%-32s", dp->lab); for (i = 0; i < nbase; i++) { uint val = *(uint *)(bases[i] + dp->off); printf (" %10u", val); } putc ('\n'); dp++; } } /* * return number of bits that are set in a value; value contains * nbits (right-justified) bits. */ static uint __inline__ nbs (uint value, uint nbits) { uint cnt = 0; #if 1 uint pos = sizeof (uint) * 8; __asm__ __volatile__ ("\ mtctr %2\n\ 1: rlwnm. %2,%1,%4,31,31\n\ beq 2f\n\ addi %0,%0,1\n\ 2: subi %4,%4,1\n\ bdnz 1b" : "=r"(cnt) : "r"(value), "r"(nbits), "r"(cnt), "r"(pos) : "ctr", "cc" ); #else uint mask = 1; do { if (value & mask) cnt++; mask <<= 1; } while (--nbits); #endif return (cnt); } static ulong badbits (uchar *bp, int n, ulong pat) { ulong *lp, cnt = 0; int nl; while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) { uchar diff; diff = *bp++ ^ (uchar)pat; if (diff) cnt += nbs ((ulong)diff, 8); n--; } lp = (ulong *)bp; nl = n / sizeof (ulong); n -= nl * sizeof (ulong); while (nl > 0) { ulong diff; diff = *lp++ ^ pat; if (diff) cnt += nbs (diff, 32); nl--; } bp = (uchar *)lp; while (n > 0) { uchar diff; diff = *bp++ ^ (uchar)pat; if (diff) cnt += nbs ((ulong)diff, 8); n--; } return (cnt); } static inline unsigned short swap16 (unsigned short x) { return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); } /* broadcast is not an error - we send them like that */ #define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC) void eth_loopback_test (void) { volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; volatile cpm8260_t *cp = &(immr->im_cpm); int c, nclosed; ulong runtime, nmsec; uchar *bases[3]; puts ("FCC Ethernet External loopback test\n"); memcpy (NetOurEther, gd->bd->bi_enetaddr, 6); /* * global initialisations for all FCC channels */ /* 28.9 - (1-2): ioports have been set up already */ #if defined(CONFIG_HYMOD) /* * Attention: this is board-specific * 0, FCC1 * 1, FCC2 * 2, FCC3 */ # define FCC_START_LOOP 0 # define FCC_END_LOOP 2 /* * Attention: this is board-specific * - FCC1 Rx-CLK is CLK10 * - FCC1 Tx-CLK is CLK11 * - FCC2 Rx-CLK is CLK13 * - FCC2 Tx-CLK is CLK14 * - FCC3 Rx-CLK is CLK15 * - FCC3 Tx-CLK is CLK16 */ /* 28.9 - (3): connect FCC's tx and rx clocks */ immr->im_cpmux.cmx_uar = 0; immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\ CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\ CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16; #elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng) /* * Attention: this is board-specific * 1, FCC2 */ # define FCC_START_LOOP 1 # define FCC_END_LOOP 1 /* * Attention: this is board-specific * - FCC2 Rx-CLK is CLK13 * - FCC2 Tx-CLK is CLK14 */ /* 28.9 - (3): connect FCC's tx and rx clocks */ immr->im_cpmux.cmx_uar = 0; immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14; #else #error "eth_loopback_test not supported on your board" #endif puts ("Initialise FCC channels:"); for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { elbt_chan *ecp = &elbt_chans[c]; volatile fcc_t *fcp = &immr->im_fcc[c]; volatile fcc_enet_t *fpp; int i; ulong addr; /* * initialise channel data */ printf (" %d", c); memset ((void *)ecp, 0, sizeof (*ecp)); ecp->state = Idle; switch (c) { case 0: /* FCC1 */ ecp->proff = PROFF_FCC1; ecp->page = CPM_CR_FCC1_PAGE; ecp->sblock = CPM_CR_FCC1_SBLOCK; break; case 1: /* FCC2 */ ecp->proff = PROFF_FCC2; ecp->page = CPM_CR_FCC2_PAGE; ecp->sblock = CPM_CR_FCC2_SBLOCK; break; case 2: /* FCC3 */ ecp->proff = PROFF_FCC3; ecp->page = CPM_CR_FCC3_PAGE; ecp->sblock = CPM_CR_FCC3_SBLOCK; break; } /* * set up tx buffers and bds */ for (i = 0; i < ELBT_NTXBD; i++) { cbd_t *bdp = &ecp->txbd[i]; uchar *bp = &ecp->txbufs[i][0]; bdp->cbd_bufaddr = (uint)bp; /* room for crc */ bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ; bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \ BD_ENET_TX_LAST | BD_ENET_TX_TC; memset ((void *)bp, patbytes[i], ELBT_BUFSZ); NetSetEther (bp, NetBcastAddr, 0x8000); } ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP; /* * set up rx buffers and bds */ for (i = 0; i < ELBT_NRXBD; i++) { cbd_t *bdp = &ecp->rxbd[i]; uchar *bp = &ecp->rxbufs[i][0]; bdp->cbd_bufaddr = (uint)bp; bdp->cbd_datlen = 0; bdp->cbd_sc = BD_ENET_RX_EMPTY; memset ((void *)bp, 0, ELBT_BUFSZ); } ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP; /* * set up the FCC channel hardware */ /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */ fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \ FCC_PSMR_ENCRC | FCC_PSMR_PRO | \ FCC_PSMR_MON | FCC_PSMR_RSH; /* 28.9 - (6): FDSR: Ethernet Syn */ fcp->fcc_fdsr = 0xD555; /* 29.9 - (7): initialise parameter ram */ fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]); /* clear whole struct to make sure all resv fields are zero */ memset ((void *)fpp, 0, sizeof (fcc_enet_t)); /* * common Parameter RAM area * * Allocate space in the reserved FCC area of DPRAM for the * internal buffers. No one uses this space (yet), so we * can do this. Later, we will add resource management for * this area. */ addr = CPM_FCC_SPECIAL_BASE + (c * 64); fpp->fen_genfcc.fcc_riptr = addr; fpp->fen_genfcc.fcc_tiptr = addr + 32; /* * Set maximum bytes per receive buffer. * It must be a multiple of 32. * buffers are in 60x bus memory. */ fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24; fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]); fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24; fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]); /* protocol-specific area */ fpp->fen_cmask = 0xdebb20e3; /* CRC mask */ fpp->fen_cpres = 0xffffffff; /* CRC preset */ fpp->fen_retlim = 15; /* Retry limit threshold */ fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */ /* * Set Ethernet station address. * * This is supplied in the board information structure, so we * copy that into the controller. * So, far we have only been given one Ethernet address. We use * the same address for all channels */ #define ea gd->bd->bi_enetaddr fpp->fen_paddrh = (ea[5] << 8) + ea[4]; fpp->fen_paddrm = (ea[3] << 8) + ea[2]; fpp->fen_paddrl = (ea[1] << 8) + ea[0]; #undef ea fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */ /* * pad pointer. use tiptr since we don't need * a specific padding char */ fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr; fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */ fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */ fpp->fen_rfthr = 1; fpp->fen_rfcnt = 1; /* 28.9 - (8): clear out events in FCCE */ fcp->fcc_fcce = ~0x0; /* 28.9 - (9): FCCM: mask all events */ fcp->fcc_fccm = 0; /* 28.9 - (10-12): we don't use ethernet interrupts */ /* 28.9 - (13) * * Let's re-initialize the channel now. We have to do it later * than the manual describes because we have just now finished * the BD initialization. */ cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \ 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG; do { __asm__ __volatile__ ("eieio"); } while (cp->cp_cpcr & CPM_CR_FLG); } puts (" done\nStarting test... (Ctrl-C to Finish)\n"); /* * Note: don't want serial output from here until the end of the * test - the delays would probably stuff things up. */ clear_ctrlc (); runtime = get_timer (0); do { nclosed = 0; for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { volatile fcc_t *fcp = &immr->im_fcc[c]; elbt_chan *ecp = &elbt_chans[c]; int i; switch (ecp->state) { case Idle: /* * set the channel Running ... */ /* 28.9 - (14): enable tx/rx in gfmr */ fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; ecp->state = Running; break; case Running: /* * (while Running only) check for * termination of the test */ (void)ctrlc (); if (had_ctrlc ()) { /* * initiate a "graceful stop transmit" * on the channel */ cp->cp_cpcr = mk_cr_cmd (ecp->page, \ ecp->sblock, 0x0c, \ CPM_CR_GRACEFUL_STOP_TX) | \ CPM_CR_FLG; do { __asm__ __volatile__ ("eieio"); } while (cp->cp_cpcr & CPM_CR_FLG); ecp->clstime = get_timer (0); ecp->state = Closing; } /* fall through ... */ case Closing: /* * (while Running or Closing) poll the channel: * - check for any non-READY tx buffers and * make them ready * - check for any non-EMPTY rx buffers and * check that they were received correctly, * adjust counters etc, then make empty */ for (i = 0; i < ELBT_NTXBD; i++) { cbd_t *bdp = &ecp->txbd[i]; ushort sc = bdp->cbd_sc; if ((sc & BD_ENET_TX_READY) != 0) continue; /* * this frame has finished * transmitting */ ecp->nsent++; if (sc & BD_ENET_TX_STATS) { ulong n; /* * we had an error on * the transmission */ n = ecp->ntxerr++; if (n < ELBT_MAXTXERR) ecp->txerrs[n] = sc; if (sc & BD_ENET_TX_DEF) ecp->txeacc.def++; if (sc & BD_ENET_TX_HB) ecp->txeacc.hb++; if (sc & BD_ENET_TX_LC) ecp->txeacc.lc++; if (sc & BD_ENET_TX_RL) ecp->txeacc.rl++; if (sc & BD_ENET_TX_RCMASK) ecp->txeacc.rc++; if (sc & BD_ENET_TX_UN) ecp->txeacc.un++; if (sc & BD_ENET_TX_CSL) ecp->txeacc.csl++; bdp->cbd_sc &= \ ~BD_ENET_TX_STATS; } if (ecp->state == Closing) ecp->clstime = get_timer (0); /* make it ready again */ bdp->cbd_sc |= BD_ENET_TX_READY; } for (i = 0; i < ELBT_NRXBD; i++) { cbd_t *bdp = &ecp->rxbd[i]; ushort sc = bdp->cbd_sc, mask; if ((sc & BD_ENET_RX_EMPTY) != 0) continue; /* we have a new frame in this buffer */ ecp->nrcvd++; mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST; if ((sc & mask) != mask) { /* somethings wrong here ... */ if (!(sc & BD_ENET_RX_LAST)) ecp->rxeacc._l++; if (!(sc & BD_ENET_RX_FIRST)) ecp->rxeacc._f++; } if (sc & BD_ENET_RX_ERRS) { ulong n; /* * we had some sort of error * on the frame */ n = ecp->nrxerr++; if (n < ELBT_MAXRXERR) ecp->rxerrs[n] = sc; if (sc & BD_ENET_RX_MISS) ecp->rxeacc.m++; if (sc & BD_ENET_RX_BC) ecp->rxeacc.bc++; if (sc & BD_ENET_RX_MC) ecp->rxeacc.mc++; if (sc & BD_ENET_RX_LG) ecp->rxeacc.lg++; if (sc & BD_ENET_RX_NO) ecp->rxeacc.no++; if (sc & BD_ENET_RX_SH) ecp->rxeacc.sh++; if (sc & BD_ENET_RX_CR) ecp->rxeacc.cr++; if (sc & BD_ENET_RX_OV) ecp->rxeacc.ov++; if (sc & BD_ENET_RX_CL) ecp->rxeacc.cl++; bdp->cbd_sc &= \ ~BD_ENET_RX_ERRS; } else { ushort datlen = bdp->cbd_datlen; Ethernet_t *ehp; ushort prot; int ours, tb, n, nbytes; ehp = (Ethernet_t *) \ &ecp->rxbufs[i][0]; ours = memcmp (ehp->et_src, \ NetOurEther, 6); prot = swap16 (ehp->et_protlen); tb = prot & 0x8000; n = prot & 0x7fff; nbytes = ELBT_BUFSZ - \ offsetof (Ethernet_t, \ et_dsap) - \ ELBT_CRCSZ; /* check the frame is correct */ if (datlen != ELBT_BUFSZ) ecp->rxeacc.badlen++; else if (!ours) ecp->rxeacc.badsrc++; else if (!tb || n >= ELBT_NTXBD) ecp->rxeacc.badtyp++; else { ulong patword = \ patwords[n]; uint nbb; nbb = badbits ( \ &ehp->et_dsap, \ nbytes, \ patword); ecp->rxeacc.badbit += \ nbb; } } if (ecp->state == Closing) ecp->clstime = get_timer (0); /* make it empty again */ bdp->cbd_sc |= BD_ENET_RX_EMPTY; } if (ecp->state != Closing) break; /* * (while Closing) check to see if * waited long enough */ if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) { /* write GFMR: disable tx/rx */ fcp->fcc_gfmr &= \ ~(FCC_GFMR_ENT | FCC_GFMR_ENR); ecp->state = Closed; } break; case Closed: nclosed++; break; } } } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1)); runtime = get_timer (runtime); if (runtime <= ELBT_CLSWAIT) { printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n", runtime, ELBT_CLSWAIT); return; } nmsec = runtime - ELBT_CLSWAIT; printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n", nmsec, ELBT_CLSWAIT); /* * now print stats */ for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { elbt_chan *ecp = &elbt_chans[c]; uint rxpps, txpps, nerr; rxpps = (ecp->nrcvd * 1000) / nmsec; txpps = (ecp->nsent * 1000) / nmsec; printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), " "%d sent (%d pps, %d txerrs)\n\n", c, ecp->nrcvd, rxpps, ecp->nrxerr, ecp->nsent, txpps, ecp->ntxerr); if ((nerr = ecp->nrxerr) > 0) { ulong i; printf ("\tFirst %d rx errs:", nerr); for (i = 0; i < nerr; i++) printf (" %04x", ecp->rxerrs[i]); putc ('\n'); } if ((nerr = ecp->ntxerr) > 0) { ulong i; printf ("\tFirst %d tx errs:", nerr); for (i = 0; i < nerr; i++) printf (" %04x", ecp->txerrs[i]); putc ('\n'); } } puts ("Receive Error Counts:\n"); for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) bases[c] = (uchar *)&elbt_chans[c].rxeacc; print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3); puts ("\nTransmit Error Counts:\n"); for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) bases[c] = (uchar *)&elbt_chans[c].txeacc; print_desc (txeacc_descs, txeacc_ndesc, bases, 3); puts ("\nRMON(-like) Counters:\n"); for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff]; print_desc (epram_descs, epram_ndesc, bases, 3); } #endif /* CONFIG_ETHER_LOOPBACK_TEST */ #endif