/* * (C) Copyright 2003-2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * This file is based on mpc4200fec.c, * (C) Copyright Motorola, Inc., 2000 */ #include #include #include #include #include #include "sdma.h" #include "fec.h" DECLARE_GLOBAL_DATA_PTR; /* #define DEBUG 0x28 */ #if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ defined(CONFIG_MPC5xxx_FEC) #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) #error "CONFIG_MII has to be defined!" #endif #if (DEBUG & 0x60) static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec); static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec); #endif /* DEBUG */ #if (DEBUG & 0x40) static uint32 local_crc32(char *string, unsigned int crc_value, int len); #endif typedef struct { uint8 data[1500]; /* actual data */ int length; /* actual length */ int used; /* buffer in use or not */ uint8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */ } NBUF; int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal); int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); /********************************************************************/ #if (DEBUG & 0x2) static void mpc5xxx_fec_phydump (char *devname) { uint16 phyStatus, i; uint8 phyAddr = CONFIG_PHY_ADDR; uint8 reg_mask[] = { #if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ /* regs to print: 0...7, 16...19, 21, 23, 24 */ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, #else /* regs to print: 0...8, 16...20 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, #endif }; for (i = 0; i < 32; i++) { if (reg_mask[i]) { miiphy_read(devname, phyAddr, i, &phyStatus); printf("Mii reg %d: 0x%04x\n", i, phyStatus); } } } #endif /********************************************************************/ static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec) { int ix; char *data; static int once = 0; for (ix = 0; ix < FEC_RBD_NUM; ix++) { if (!once) { data = (char *)malloc(FEC_MAX_PKT_SIZE); if (data == NULL) { printf ("RBD INIT FAILED\n"); return -1; } fec->rbdBase[ix].dataPointer = (uint32)data; } fec->rbdBase[ix].status = FEC_RBD_EMPTY; fec->rbdBase[ix].dataLength = 0; } once ++; /* * have the last RBD to close the ring */ fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP; fec->rbdIndex = 0; return 0; } /********************************************************************/ static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec) { int ix; for (ix = 0; ix < FEC_TBD_NUM; ix++) { fec->tbdBase[ix].status = 0; } /* * Have the last TBD to close the ring */ fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP; /* * Initialize some indices */ fec->tbdIndex = 0; fec->usedTbdIndex = 0; fec->cleanTbdNum = FEC_TBD_NUM; } /********************************************************************/ static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd) { /* * Reset buffer descriptor as empty */ if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); else pRbd->status = FEC_RBD_EMPTY; pRbd->dataLength = 0; /* * Now, we have an empty RxBD, restart the SmartDMA receive task */ SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); /* * Increment BD count */ fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; } /********************************************************************/ static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec) { volatile FEC_TBD *pUsedTbd; #if (DEBUG & 0x1) printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", fec->cleanTbdNum, fec->usedTbdIndex); #endif /* * process all the consumed TBDs */ while (fec->cleanTbdNum < FEC_TBD_NUM) { pUsedTbd = &fec->tbdBase[fec->usedTbdIndex]; if (pUsedTbd->status & FEC_TBD_READY) { #if (DEBUG & 0x20) printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum); #endif return; } /* * clean this buffer descriptor */ if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) pUsedTbd->status = FEC_TBD_WRAP; else pUsedTbd->status = 0; /* * update some indeces for a correct handling of the TBD ring */ fec->cleanTbdNum++; fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; } } /********************************************************************/ static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac) { uint8 currByte; /* byte for which to compute the CRC */ int byte; /* loop - counter */ int bit; /* loop - counter */ uint32 crc = 0xffffffff; /* initial value */ /* * The algorithm used is the following: * we loop on each of the six bytes of the provided address, * and we compute the CRC by left-shifting the previous * value by one position, so that each bit in the current * byte of the address may contribute the calculation. If * the latter and the MSB in the CRC are different, then * the CRC value so computed is also ex-ored with the * "polynomium generator". The current byte of the address * is also shifted right by one bit at each iteration. * This is because the CRC generatore in hardware is implemented * as a shift-register with as many ex-ores as the radixes * in the polynomium. This suggests that we represent the * polynomiumm itself as a 32-bit constant. */ for (byte = 0; byte < 6; byte++) { currByte = mac[byte]; for (bit = 0; bit < 8; bit++) { if ((currByte & 0x01) ^ (crc & 0x01)) { crc >>= 1; crc = crc ^ 0xedb88320; } else { crc >>= 1; } currByte >>= 1; } } crc = crc >> 26; /* * Set individual hash table register */ if (crc >= 32) { fec->eth->iaddr1 = (1 << (crc - 32)); fec->eth->iaddr2 = 0; } else { fec->eth->iaddr1 = 0; fec->eth->iaddr2 = (1 << crc); } /* * Set physical address */ fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; } /********************************************************************/ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) { mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; #if (DEBUG & 0x1) printf ("mpc5xxx_fec_init... Begin\n"); #endif /* * Initialize RxBD/TxBD rings */ mpc5xxx_fec_rbd_init(fec); mpc5xxx_fec_tbd_init(fec); /* * Clear FEC-Lite interrupt event register(IEVENT) */ fec->eth->ievent = 0xffffffff; /* * Set interrupt mask register */ fec->eth->imask = 0x00000000; /* * Set FEC-Lite receive control register(R_CNTRL): */ if (fec->xcv_type == SEVENWIRE) { /* * Frame length=1518; 7-wire mode */ fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */ } else { /* * Frame length=1518; MII mode; */ fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */ } fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */ if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ } /* * Set Opcode/Pause Duration Register */ fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */ /* * Set Rx FIFO alarm and granularity value */ fec->eth->rfifo_cntrl = 0x0c000000 | (fec->eth->rfifo_cntrl & ~0x0f000000); fec->eth->rfifo_alarm = 0x0000030c; #if (DEBUG & 0x22) if (fec->eth->rfifo_status & 0x00700000 ) { printf("mpc5xxx_fec_init() RFIFO error\n"); } #endif /* * Set Tx FIFO granularity value */ fec->eth->tfifo_cntrl = 0x0c000000 | (fec->eth->tfifo_cntrl & ~0x0f000000); #if (DEBUG & 0x2) printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status); printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm); #endif /* * Set transmit fifo watermark register(X_WMRK), default = 64 */ fec->eth->tfifo_alarm = 0x00000080; fec->eth->x_wmrk = 0x2; /* * Set individual address filter for unicast address * and set physical address registers. */ mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr); /* * Set multicast address filter */ fec->eth->gaddr1 = 0x00000000; fec->eth->gaddr2 = 0x00000000; /* * Turn ON cheater FSM: ???? */ fec->eth->xmit_fsm = 0x03000000; #if defined(CONFIG_MPC5200) /* * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't * work w/ the current receive task. */ sdma->PtdCntrl |= 0x00000001; #endif /* * Set priority of different initiators */ sdma->IPR0 = 7; /* always */ sdma->IPR3 = 6; /* Eth RX */ sdma->IPR4 = 5; /* Eth Tx */ /* * Clear SmartDMA task interrupt pending bits */ SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO); /* * Initialize SmartDMA parameters stored in SRAM */ *(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase; *(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase; *(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase; *(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase; /* * Enable FEC-Lite controller */ fec->eth->ecntrl |= 0x00000006; #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) mpc5xxx_fec_phydump (dev->name); #endif /* * Enable SmartDMA receive task */ SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); #if (DEBUG & 0x1) printf("mpc5xxx_fec_init... Done \n"); #endif return 1; } /********************************************************************/ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) { mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ #if (DEBUG & 0x1) printf ("mpc5xxx_fec_init_phy... Begin\n"); #endif /* * Initialize GPIO pins */ if (fec->xcv_type == SEVENWIRE) { /* 10MBit with 7-wire operation */ #if defined(CONFIG_TOTAL5200) /* 7-wire and USB2 on Ethernet */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000; #else /* !CONFIG_TOTAL5200 */ /* 7-wire only */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000; #endif /* CONFIG_TOTAL5200 */ } else { /* 100MBit with MD operation */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000; } /* * Clear FEC-Lite interrupt event register(IEVENT) */ fec->eth->ievent = 0xffffffff; /* * Set interrupt mask register */ fec->eth->imask = 0x00000000; /* * In original Promess-provided code PHY initialization is disabled with the * following comment: "Phy initialization is DISABLED for now. There was a * problem with running 100 Mbps on PRO board". Thus we temporarily disable * PHY initialization for the Motion-PRO board, until a proper fix is found. */ if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ } if (fec->xcv_type != SEVENWIRE) { /* * Initialize PHY(LXT971A): * * Generally, on power up, the LXT971A reads its configuration * pins to check for forced operation, If not cofigured for * forced operation, it uses auto-negotiation/parallel detection * to automatically determine line operating conditions. * If the PHY device on the other side of the link supports * auto-negotiation, the LXT971A auto-negotiates with it * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not * support auto-negotiation, the LXT971A automatically detects * the presence of either link pulses(10Mbps PHY) or Idle * symbols(100Mbps) and sets its operating conditions accordingly. * * When auto-negotiation is controlled by software, the following * steps are recommended. * * Note: * The physical address is dependent on hardware configuration. * */ int timeout = 1; uint16 phyStatus; /* * Reset PHY, then delay 300ns */ miiphy_write(dev->name, phyAddr, 0x0, 0x8000); udelay(1000); #if defined(CONFIG_UC101) /* Set the LED configuration Register for the UC101 Board */ miiphy_write(dev->name, phyAddr, 0x14, 0x4122); #endif if (fec->xcv_type == MII10) { /* * Force 10Base-T, FDX operation */ #if (DEBUG & 0x2) printf("Forcing 10 Mbps ethernet link... "); #endif miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); /* miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100); */ miiphy_write(dev->name, phyAddr, 0x0, 0x0180); timeout = 20; do { /* wait for link status to go down */ udelay(10000); if ((timeout--) == 0) { #if (DEBUG & 0x2) printf("hmmm, should not have waited..."); #endif break; } miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); #if (DEBUG & 0x2) printf("="); #endif } while ((phyStatus & 0x0004)); /* !link up */ timeout = 1000; do { /* wait for link status to come back up */ udelay(10000); if ((timeout--) == 0) { printf("failed. Link is down.\n"); break; } miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); #if (DEBUG & 0x2) printf("+"); #endif } while (!(phyStatus & 0x0004)); /* !link up */ #if (DEBUG & 0x2) printf ("done.\n"); #endif } else { /* MII100 */ /* * Set the auto-negotiation advertisement register bits */ miiphy_write(dev->name, phyAddr, 0x4, 0x01e1); /* * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation */ miiphy_write(dev->name, phyAddr, 0x0, 0x1200); /* * Wait for AN completion */ timeout = 5000; do { udelay(1000); if ((timeout--) == 0) { #if (DEBUG & 0x2) printf("PHY auto neg 0 failed...\n"); #endif return -1; } if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) { #if (DEBUG & 0x2) printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus); #endif return -1; } } while (!(phyStatus & 0x0004)); #if (DEBUG & 0x2) printf("PHY auto neg complete! \n"); #endif } } #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) mpc5xxx_fec_phydump (dev->name); #endif #if (DEBUG & 0x1) printf("mpc5xxx_fec_init_phy... Done \n"); #endif return 1; } /********************************************************************/ static void mpc5xxx_fec_halt(struct eth_device *dev) { #if defined(CONFIG_MPC5200) struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; #endif mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; int counter = 0xffff; #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) mpc5xxx_fec_phydump (dev->name); #endif /* * mask FEC chip interrupts */ fec->eth->imask = 0; /* * issue graceful stop command to the FEC transmitter if necessary */ fec->eth->x_cntrl |= 0x00000001; /* * wait for graceful stop to register */ while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; /* * Disable SmartDMA tasks */ SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO); SDMA_TASK_DISABLE (FEC_RECV_TASK_NO); #if defined(CONFIG_MPC5200) /* * Turn on COMM bus prefetch in the MGT5200 BestComm after we're * done. It doesn't work w/ the current receive task. */ sdma->PtdCntrl &= ~0x00000001; #endif /* * Disable the Ethernet Controller */ fec->eth->ecntrl &= 0xfffffffd; /* * Clear FIFO status registers */ fec->eth->rfifo_status &= 0x00700000; fec->eth->tfifo_status &= 0x00700000; fec->eth->reset_cntrl = 0x01000000; /* * Issue a reset command to the FEC chip */ fec->eth->ecntrl |= 0x1; /* * wait at least 16 clock cycles */ udelay(10); #if (DEBUG & 0x3) printf("Ethernet task stopped\n"); #endif } #if (DEBUG & 0x60) /********************************************************************/ static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec) { uint16 phyAddr = CONFIG_PHY_ADDR; uint16 phyStatus; if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) { miiphy_read(devname, phyAddr, 0x1, &phyStatus); printf("\nphyStatus: 0x%04x\n", phyStatus); printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); printf("ievent: 0x%08x\n", fec->eth->ievent); printf("x_status: 0x%08x\n", fec->eth->x_status); printf("tfifo: status 0x%08x\n", fec->eth->tfifo_status); printf(" control 0x%08x\n", fec->eth->tfifo_cntrl); printf(" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr); printf(" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr); printf(" alarm 0x%08x\n", fec->eth->tfifo_alarm); printf(" readptr 0x%08x\n", fec->eth->tfifo_rdptr); printf(" writptr 0x%08x\n", fec->eth->tfifo_wrptr); } } static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec) { uint16 phyAddr = CONFIG_PHY_ADDR; uint16 phyStatus; if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) { miiphy_read(devname, phyAddr, 0x1, &phyStatus); printf("\nphyStatus: 0x%04x\n", phyStatus); printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); printf("ievent: 0x%08x\n", fec->eth->ievent); printf("x_status: 0x%08x\n", fec->eth->x_status); printf("rfifo: status 0x%08x\n", fec->eth->rfifo_status); printf(" control 0x%08x\n", fec->eth->rfifo_cntrl); printf(" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr); printf(" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr); printf(" alarm 0x%08x\n", fec->eth->rfifo_alarm); printf(" readptr 0x%08x\n", fec->eth->rfifo_rdptr); printf(" writptr 0x%08x\n", fec->eth->rfifo_wrptr); } } #endif /* DEBUG */ /********************************************************************/ static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data, int data_length) { /* * This routine transmits one frame. This routine only accepts * 6-byte Ethernet addresses. */ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; volatile FEC_TBD *pTbd; #if (DEBUG & 0x20) printf("tbd status: 0x%04x\n", fec->tbdBase[0].status); tfifo_print(dev->name, fec); #endif /* * Clear Tx BD ring at first */ mpc5xxx_fec_tbd_scrub(fec); /* * Check for valid length of data. */ if ((data_length > 1500) || (data_length <= 0)) { return -1; } /* * Check the number of vacant TxBDs. */ if (fec->cleanTbdNum < 1) { #if (DEBUG & 0x20) printf("No available TxBDs ...\n"); #endif return -1; } /* * Get the first TxBD to send the mac header */ pTbd = &fec->tbdBase[fec->tbdIndex]; pTbd->dataLength = data_length; pTbd->dataPointer = (uint32)eth_data; pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; #if (DEBUG & 0x100) printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex); #endif /* * Kick the MII i/f */ if (fec->xcv_type != SEVENWIRE) { uint16 phyStatus; miiphy_read(dev->name, 0, 0x1, &phyStatus); } /* * Enable SmartDMA transmit task */ #if (DEBUG & 0x20) tfifo_print(dev->name, fec); #endif SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO); #if (DEBUG & 0x20) tfifo_print(dev->name, fec); #endif #if (DEBUG & 0x8) printf( "+" ); #endif fec->cleanTbdNum -= 1; #if (DEBUG & 0x129) && (DEBUG & 0x80000000) printf ("smartDMA ethernet Tx task enabled\n"); #endif /* * wait until frame is sent . */ while (pTbd->status & FEC_TBD_READY) { udelay(10); #if (DEBUG & 0x8) printf ("TDB status = %04x\n", pTbd->status); #endif } return 0; } /********************************************************************/ static int mpc5xxx_fec_recv(struct eth_device *dev) { /* * This command pulls one frame from the card */ mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex]; unsigned long ievent; int frame_length, len = 0; NBUF *frame; uchar buff[FEC_MAX_PKT_SIZE]; #if (DEBUG & 0x1) printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex); #endif #if (DEBUG & 0x8) printf( "-" ); #endif /* * Check if any critical events have happened */ ievent = fec->eth->ievent; fec->eth->ievent = ievent; if (ievent & 0x20060000) { /* BABT, Rx/Tx FIFO errors */ mpc5xxx_fec_halt(dev); mpc5xxx_fec_init(dev, NULL); return 0; } if (ievent & 0x80000000) { /* Heartbeat error */ fec->eth->x_cntrl |= 0x00000001; } if (ievent & 0x10000000) { /* Graceful stop complete */ if (fec->eth->x_cntrl & 0x00000001) { mpc5xxx_fec_halt(dev); fec->eth->x_cntrl &= ~0x00000001; mpc5xxx_fec_init(dev, NULL); } } if (!(pRbd->status & FEC_RBD_EMPTY)) { if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) && ((pRbd->dataLength - 4) > 14)) { /* * Get buffer address and size */ frame = (NBUF *)pRbd->dataPointer; frame_length = pRbd->dataLength - 4; #if (DEBUG & 0x20) { int i; printf("recv data hdr:"); for (i = 0; i < 14; i++) printf("%x ", *(frame->head + i)); printf("\n"); } #endif /* * Fill the buffer and pass it to upper layers */ memcpy(buff, frame->head, 14); memcpy(buff + 14, frame->data, frame_length); NetReceive(buff, frame_length); len = frame_length; } /* * Reset buffer descriptor as empty */ mpc5xxx_fec_rbd_clean(fec, pRbd); } SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); return len; } /********************************************************************/ int mpc5xxx_fec_initialize(bd_t * bis) { mpc5xxx_fec_priv *fec; struct eth_device *dev; char *tmp, *end; char env_enetaddr[6]; int i; fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec)); dev = (struct eth_device *)malloc(sizeof(*dev)); memset(dev, 0, sizeof *dev); fec->eth = (ethernet_regs *)MPC5XXX_FEC; fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); #if defined(CONFIG_CANMB) || \ defined(CONFIG_CM1_QP1) || \ defined(CONFIG_HMI1001) || \ defined(CONFIG_ICECUBE) || \ defined(CONFIG_INKA4X0) || \ defined(CONFIG_JUPITER) || \ defined(CONFIG_MCC200) || \ defined(CONFIG_MOTIONPRO) || \ defined(CONFIG_O2DNT) || \ defined(CONFIG_PM520) || \ defined(CONFIG_TOP5200) || \ defined(CONFIG_TQM5200) || \ defined(CONFIG_UC101) || \ defined(CONFIG_V38B) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else fec->xcv_type = MII10; # endif #elif defined(CONFIG_TOTAL5200) fec->xcv_type = SEVENWIRE; #else #error fec->xcv_type not initialized. #endif dev->priv = (void *)fec; dev->iobase = MPC5XXX_FEC; dev->init = mpc5xxx_fec_init; dev->halt = mpc5xxx_fec_halt; dev->send = mpc5xxx_fec_send; dev->recv = mpc5xxx_fec_recv; sprintf(dev->name, "FEC ETHERNET"); eth_register(dev); #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register (dev->name, fec5xxx_miiphy_read, fec5xxx_miiphy_write); #endif /* * Try to set the mac address now. The fec mac address is * a garbage after reset. When not using fec for booting * the Linux fec driver will try to work with this garbage. */ tmp = getenv("ethaddr"); if (tmp) { for (i=0; i<6; i++) { env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; if (tmp) tmp = (*end) ? end+1 : end; } mpc5xxx_fec_set_hwaddr(fec, env_enetaddr); } mpc5xxx_fec_init_phy(dev, bis); return 1; } /* MII-interface related functions */ /********************************************************************/ int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) { ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; uint32 reg; /* convenient holder for the PHY register */ uint32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; /* * reading from any PHY's register is done by properly * programming the FEC's MII data register. */ reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); /* * wait for the related interrupt */ while ((timeout--) && (!(eth->ievent & 0x00800000))) ; if (timeout == 0) { #if (DEBUG & 0x2) printf ("Read MDIO failed...\n"); #endif return -1; } /* * clear mii interrupt bit */ eth->ievent = 0x00800000; /* * it's now safe to read the PHY's register */ *retVal = (uint16) eth->mii_data; return 0; } /********************************************************************/ int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) { ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; uint32 reg; /* convenient holder for the PHY register */ uint32 phy; /* convenient holder for the PHY */ int timeout = 0xffff; reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | FEC_MII_DATA_TA | phy | reg | data); /* * wait for the MII interrupt */ while ((timeout--) && (!(eth->ievent & 0x00800000))) ; if (timeout == 0) { #if (DEBUG & 0x2) printf ("Write MDIO failed...\n"); #endif return -1; } /* * clear MII interrupt bit */ eth->ievent = 0x00800000; return 0; } #if (DEBUG & 0x40) static uint32 local_crc32(char *string, unsigned int crc_value, int len) { int i; char c; unsigned int crc, count; /* * crc32 algorithm */ /* * crc = 0xffffffff; * The initialized value should be 0xffffffff */ crc = crc_value; for (i = len; --i >= 0;) { c = *string++; for (count = 0; count < 8; count++) { if ((c & 0x01) ^ (crc & 0x01)) { crc >>= 1; crc = crc ^ 0xedb88320; } else { crc >>= 1; } c >>= 1; } } /* * In big endian system, do byte swaping for crc value */ /**/ return crc; } #endif /* DEBUG */ #endif /* CONFIG_MPC5xxx_FEC */