/* * AU1X00 UART support * * Hardcoded to UART 0 for now * Speed and options also hardcoded to 115200 8N1 * * Copyright (c) 2003 Thomas.Lange@corelatus.se * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <config.h> #ifdef CONFIG_AU1X00 #include <common.h> #include <asm/au1x00.h> /****************************************************************************** * * serial_init - initialize a channel * * This routine initializes the number of data bits, parity * and set the selected baud rate. Interrupts are disabled. * Set the modem control signals if the option is selected. * * RETURNS: N/A */ int serial_init (void) { volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR); volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE); /* Enable clocks first */ *uart_enable = UART_EN_CE; /* Then release reset */ /* Must release reset before setting other regs */ *uart_enable = UART_EN_CE|UART_EN_E; /* Activate fifos, reset tx and rx */ /* Set tx trigger level to 12 */ *uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR| UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12; serial_setbrg(); return 0; } void serial_setbrg (void) { volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK); volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR); /* Set baudrate to 115200 */ *uart_clk = 0x36; /* Set parity, stop bits and word length to 8N1 */ *uart_lcr = UART_LCR_WLEN8; } void serial_putc (const char c) { volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR); volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX); if (c == '\n') serial_putc ('\r'); /* Wait for fifo to shift out some bytes */ while((*uart_lsr&UART_LSR_THRE)==0); *uart_tx = (u32)c; } void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } int serial_getc (void) { volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX); char c; while (!serial_tstc()); c = (*uart_rx&0xFF); return c; } int serial_tstc (void) { volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR); if(*uart_lsr&UART_LSR_DR){ /* Data in rfifo */ return(1); } return 0; } #endif /* CONFIG_SERIAL_AU1X00 */