/* * Copyright (C) 2005-2006 Atmel Corporation * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #ifdef CFG_HSDRAMC #include <asm/io.h> #include <asm/sdram.h> #include <asm/arch/clk.h> #include <asm/arch/memory-map.h> #include "hsdramc1.h" unsigned long sdram_init(const struct sdram_info *info) { unsigned long *sdram = (unsigned long *)uncached(info->phys_addr); unsigned long sdram_size; unsigned long tmp; unsigned long bus_hz; unsigned int i; tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) | HSDRAMC1_BF(NR, info->row_bits - 11) | HSDRAMC1_BF(NB, info->bank_bits - 1) | HSDRAMC1_BF(CAS, info->cas) | HSDRAMC1_BF(TWR, info->twr) | HSDRAMC1_BF(TRC, info->trc) | HSDRAMC1_BF(TRP, info->trp) | HSDRAMC1_BF(TRCD, info->trcd) | HSDRAMC1_BF(TRAS, info->tras) | HSDRAMC1_BF(TXSR, info->txsr)); #ifdef CFG_SDRAM_16BIT tmp |= HSDRAMC1_BIT(DBW); sdram_size = 1 << (info->row_bits + info->col_bits + info->bank_bits + 1); #else sdram_size = 1 << (info->row_bits + info->col_bits + info->bank_bits + 2); #endif hsdramc1_writel(CR, tmp); /* * Initialization sequence for SDRAM, from the data sheet: * * 1. A minimum pause of 200 us is provided to precede any * signal toggle. */ udelay(200); /* * 2. A Precharge All command is issued to the SDRAM */ hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE); hsdramc1_readl(MR); writel(0, sdram); /* * 3. Eight auto-refresh (CBR) cycles are provided */ hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH); hsdramc1_readl(MR); for (i = 0; i < 8; i++) writel(0, sdram); /* * 4. A mode register set (MRS) cycle is issued to program * SDRAM parameters, in particular CAS latency and burst * length. * * CAS from info struct, burst length 1, serial burst type */ hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE); hsdramc1_readl(MR); writel(0, sdram + (info->cas << 4)); /* * 5. A Normal Mode command is provided, 3 clocks after tMRD * is met. * * From the timing diagram, it looks like tMRD is 3 * cycles...try a dummy read from the peripheral bus. */ hsdramc1_readl(MR); hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL); hsdramc1_readl(MR); writel(0, sdram); /* * 6. Write refresh rate into SDRAMC refresh timer count * register (refresh rate = timing between refresh cycles). * * 15.6 us is a typical value for a burst of length one */ bus_hz = get_sdram_clk_rate(); hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000); printf("SDRAM: %u MB at address 0x%08lx\n", sdram_size >> 20, info->phys_addr); printf("Testing SDRAM..."); for (i = 0; i < sdram_size / 4; i++) sdram[i] = i; for (i = 0; i < sdram_size / 4; i++) { tmp = sdram[i]; if (tmp != i) { printf("FAILED at address 0x%08lx\n", info->phys_addr + i * 4); printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i); return 0; } } puts("OK\n"); return sdram_size; } #endif /* CFG_HSDRAMC */