/* * Serial Port stuff - taken from Linux * * (C) Copyright 2002 * MAZeT GmbH <www.mazet.de> * Stephan Linz <linz@mazet.de>, <linz@li-pro.net> * * (c) 2004 * IMMS gGmbH <www.imms.de> * Thomas Elste <info@elste.org> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include <common.h> #ifdef CONFIG_NETARM #include <asm/hardware.h> DECLARE_GLOBAL_DATA_PTR; #define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) #if !defined(CONFIG_NETARM_NS7520) #define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) #else #define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC)) #endif /* wait until transmitter is ready for another character */ #define TXWAITRDY(registers) \ { \ ulong tmo = get_timer(0) + 1 * CFG_HZ; \ while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \ if (get_timer(0) > tmo) \ break; \ } \ } #ifndef CONFIG_UART1_CONSOLE volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0); volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1); #else volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(1); volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(0); #endif extern void _netarm_led_FAIL1(void); /* * Setup both serial i/f with given baudrate */ void serial_setbrg (void) { /* set 0 ... make sure pins are configured for serial */ #if !defined(CONFIG_NETARM_NS7520) PORTA = PORTB = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); #else PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); #endif /* first turn em off */ serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0; /* clear match register, we don't need it */ serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0; /* setup bit rate generator and rx buffer gap timer (1 byte only) */ if ((gd->baudrate >= MIN_BAUD_RATE) && (gd->baudrate <= MAX_BAUD_RATE)) { serial_reg_ch1->bitrate = serial_reg_ch2->bitrate = NETARM_SER_BR_X16 (gd->baudrate); serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer = 0; serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer = NETARM_SER_RXGAP (gd->baudrate); } else { hang (); } /* setup port mode */ serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b = ( NETARM_SER_CTLB_RCGT_EN | NETARM_SER_CTLB_UART_MODE); serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = ( NETARM_SER_CTLA_ENABLE | NETARM_SER_CTLA_P_NONE | /* see errata */ NETARM_SER_CTLA_2STOP | NETARM_SER_CTLA_8BITS | NETARM_SER_CTLA_DTR_EN | NETARM_SER_CTLA_RTS_EN); } /* * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. */ int serial_init (void) { serial_setbrg (); return 0; } /* * Output a single byte to the serial port. */ void serial_putc (const char c) { volatile unsigned char *fifo; /* If \n, also do \r */ if (c == '\n') serial_putc ('\r'); fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo); TXWAITRDY (serial_reg_ch1); *fifo = c; } /* * Test of a single byte from the serial port. Returns 1 on success, 0 * otherwise. */ int serial_tstc(void) { return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY; } /* * Read a single byte from the serial port. Returns 1 on success, 0 * otherwise. */ int serial_getc (void) { unsigned int ch_uint; volatile unsigned int *fifo; volatile unsigned char *fifo_char = NULL; int buf_count = 0; while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY)) /* NOP */ ; fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo); fifo_char = (unsigned char *) &ch_uint; ch_uint = *fifo; buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a); switch (buf_count) { case NETARM_SER_STATA_RXFDB_4BYTES: buf_count = 4; break; case NETARM_SER_STATA_RXFDB_3BYTES: buf_count = 3; break; case NETARM_SER_STATA_RXFDB_2BYTES: buf_count = 2; break; case NETARM_SER_STATA_RXFDB_1BYTES: buf_count = 1; break; default: /* panic, be never here */ break; } serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED; return ch_uint & 0xff; } void serial_puts (const char *s) { while (*s) { serial_putc (*s++); } } #endif /* CONFIG_NETARM */